update help_topic set description = CONCAT(description, '\n|                        | used. This is marked only for the last table in   |\n|                        | the SELECT.                                       |\n+------------------------+---------------------------------------------------+\n| Full scan on NULL key  | The table is a part of the sub query and if the   |\n|                        | value that is used to match the sub query will    |\n|                        | be NULL, we will do a full table scan.            |\n+------------------------+---------------------------------------------------+\n| Impossible HAVING      | The used HAVING clause is always false so the     |\n|                        | SELECT will return no rows.                       |\n+------------------------+---------------------------------------------------+\n| Impossible WHERE       | The used WHERE clause is always false so the      |\n| noticed after reading  | SELECT will return no rows. This case was         |\n| const tables.          | detected after we had read all \'const\' tables     |\n|                        | and used the column values as constant in the     |\n|                        | WHERE clause. For example: WHERE const_column=5   |\n|                        | and const_column had a value of 4.                |\n+------------------------+---------------------------------------------------+\n| Impossible WHERE       | The used WHERE clause is always false so the      |\n|                        | SELECT will return no rows. For example: WHERE    |\n|                        | 1=2                                               |\n+------------------------+---------------------------------------------------+\n| No matching min/max    | During early optimization of MIN()/MAX() values   |\n| row                    | it was detected that no row could match the       |\n|                        | WHERE clause. The MIN()/MAX() function will       |\n|                        | return NULL.                                      |\n+------------------------+---------------------------------------------------+\n| no matching row in     | The table was a const table (a table with only    |\n| const table            | one possible matching row), but no row was found. |\n+------------------------+---------------------------------------------------+\n| No tables used         | The SELECT was a sub query that did not use any   |\n|                        | tables. For example a there was no FROM clause    |\n|                        | or a FROM DUAL clause.                            |\n+------------------------+---------------------------------------------------+\n| Not exists             | Stop searching after more row if we find one      |\n|                        | single matching row. This optimization is used    |\n|                        | with LEFT JOIN where one is explicitly searching  |\n|                        | for rows that doesn\'t exists in the LEFT JOIN     |\n|                        | TABLE. Example: SELECT * FROM t1 LEFT JOIN t2 on  |\n|                        | (...) WHERE t2.not_null_column IS NULL.  As       |\n|                        | t2.not_null_column can only be NULL if there was  |\n|                        | no matching row for on condition, we can stop     |\n|                        | searching if we find a single matching row.       |\n+------------------------+---------------------------------------------------+\n| Open_frm_only          | For information_schema tables.  Only the frm      |\n|                        | (table definition file was opened) was opened     |\n|                        | for each matching row.                            |\n+------------------------+---------------------------------------------------+\n| Open_full_table        | For information_schema tables. A full table open  |\n|                        | for each matching row is done to retrieve the     |\n|                        | requested information. (Slow)                     |\n+------------------------+---------------------------------------------------+\n| Open_trigger_only      | For information_schema tables. Only the trigger   |\n|                        | file definition was opened for each matching row. |\n+------------------------+---------------------------------------------------+\n| Range checked for      | This only happens when there was no good default  |\n| each record (index     | index to use but there may some index that could  |\n| map: ...)              | be used when we can treat all columns from        |\n|                        | previous table as constants.  For each row        |\n|                        | combination the optimizer will decide which       |\n|                        | index to use (if any) to fetch a row from this    |\n|                        | table. This is not fast, but faster than a full   |\n|                        | table scan that is the only other choice. The     |\n|                        | index map is a bitmask that shows which index     |\n|                        | are considered for each row condition.            |\n+------------------------+---------------------------------------------------+\n| Scanned 0/1/all        | For information_schema tables. Shows how many     |\n| databases              | times we had to do a directory scan.              |\n+------------------------+---------------------------------------------------+\n| Select tables          | All tables in the join was optimized away. This   |\n| optimized away         | happens when we are only using COUNT(*), MIN()    |\n|                        | and MAX() functions in the SELECT and we where    |\n|                        | able to replace all of these with constants.      |\n+------------------------+---------------------------------------------------+\n| Skip_open_table        | For information_schema tables. The queried table  |\n|                        | didn\'t need to be opened.                         |\n+------------------------+---------------------------------------------------+\n| unique row not found   | The table was detected to be a const table (a     |\n|                        | table with only one possible matching row)        |\n|                        | during the early optimization phase, but no row   |\n|                        | was found.                                        |\n+------------------------+---------------------------------------------------+\n| Using filesort         | Filesort is needed to resolve the query. This     |\n|                        | means an extra phase where we first collect all   |\n|                        | columns to sort, sort them with a disk based      |\n|                        | merge sort and then use the sorted set to         |\n|                        | retrieve the rows in sorted order. If the column  |\n|                        | set is small, we store all the columns in the     |\n|                        | sort file to not have to go to the database to    |\n|                        | retrieve them again.                              |\n+------------------------+---------------------------------------------------+\n| Using index            | Only the index is used to retrieve the needed     |\n|                        | information from the table. There is no need to   |\n|                        | perform an extra seek to retrieve the actual      |\n|                        | record.                                           |\n+------------------------+---------------------------------------------------+\n| Using index condition  | Like \'Using where\' but the where condition is     |\n|                        | pushed down to the table engine for internal      |\n|                        | optimization at the index level.                  |\n+------------------------+---------------------------------------------------+\n| Using index            | Like \'Using index condition\' but in addition we   |\n| condition(BKA)         | use batch key access to retrieve rows.            |\n+------------------------+---------------------------------------------------+\n| Using index for        | The index is being used to resolve a GROUP BY or  |\n| group-by               | DISTINCT query. The rows are not read.  This is   |\n|                        | very efficient if the table has a lot of          |\n|                        | identical index entries as duplicates are         |\n|                        | quickly jumped over.                              |\n+------------------------+---------------------------------------------------+\n| Using intersect(...)   | For index_merge joins. Shows which index are      |\n|                        | part of the intersect.                            |\n+------------------------+---------------------------------------------------+\n| Using join buffer      | We store previous row combinations in a row       |\n|                        | buffer to be able to match each row against all   |\n|                        | of the rows combinations in the join buffer at    |\n|                        | one go.                                           |\n+------------------------+---------------------------------------------------+\n| Using sort_union(...)  | For index_merge joins. Shows which index are      |\n|                        | part of the union.                                |\n+------------------------+---------------------------------------------------+\n| Using temporary        | A temporary table is created to hold the result.  |\n|                        | This typically happens if you are using GROUP     |\n|                        | BY, DISTINCT or ORDER BY.                         |\n+------------------------+---------------------------------------------------+\n| Using where            | A WHERE expression (in additional to the          |\n|                        | possible key lookup) is used to check if the row  |\n|                        | should be accepted. If you don\'t have \'Using      |\n|                        | where\' together with a join type of ALL, you are  |\n|                        | probably doing something wrong!                   |\n+------------------------+---------------------------------------------------+\n| Using where with       | Like \'Using where\' but the where condition is     |\n| pushed condition       | pushed down to the table engine for internal      |\n|                        | optimization at the row level.                    |\n+------------------------+---------------------------------------------------+\n| Using buffer           | The UPDATE statement will first buffer the rows,  |\n|                        | and then run the updates, rather than do updates  |\n|                        | on the fly. See Using Buffer UPDATE Algorithm     |\n|                        | for a detailed explanation.                       |\n+------------------------+---------------------------------------------------+\n\nEXPLAIN EXTENDED\n----------------\n\nThe EXTENDED keyword adds another column, filtered, to the output. This is a\npercentage estimate of the table rows that will be filtered by the condition.\n\nAn EXPLAIN EXTENDED will always throw a warning, as it adds extra Message\ninformation to a subsequent SHOW WARNINGS statement. This includes what the\nSELECT query would look like after optimizing and rewriting rules are applied\nand how the optimizer qualifies columns and tables.\n\nExamples\n--------\n\nAs synonym for DESCRIBE or SHOW COLUMNS FROM:\n\nDESCRIBE city;\n+------------+----------+------+-----+---------+----------------+\n| Field      | Type     | Null | Key | Default | Extra          |\n+------------+----------+------+-----+---------+----------------+\n| Id         | int(11)  | NO   | PRI | NULL    | auto_increment |\n| Name       | char(35) | YES  |     | NULL    |                |\n| Country    | char(3)  | NO   | UNI |         |                |\n| District   | char(20) | YES  | MUL |         |                |\n| Population | int(11)  | YES  |     | NULL    |                |\n+------------+----------+------+-----+---------+----------------+\n\nA simple set of examples to see how EXPLAIN can identify poor index usage:\n\nCREATE TABLE IF NOT EXISTS `employees_example` (\n `id` int(11) NOT NULL AUTO_INCREMENT,\n `first_name` varchar(30) NOT NULL,\n `last_name` varchar(40) NOT NULL,\n `position` varchar(25) NOT NULL,\n `home_address` varchar(50) NOT NULL,\n `home_phone` varchar(12) NOT NULL,\n `employee_code` varchar(25) NOT NULL,\n PRIMARY KEY (`id`),\n UNIQUE KEY `employee_code` (`employee_code`),\n KEY `first_name` (`first_name`,`last_name`)\n) ENGINE=Aria;\n\nINSERT INTO `employees_example` (`first_name`, `last_name`, `position`,\n`home_address`, `home_phone`, `employee_code`)\n VALUES\n (\'Mustapha\', \'Mond\', \'Chief Executive Officer\', \'692 Promiscuous Plaza\',\n\'326-555-3492\', \'MM1\'),\n (\'Henry\', \'Foster\', \'Store Manager\', \'314 Savage Circle\', \'326-555-3847\',\n\'HF1\'),\n (\'Bernard\', \'Marx\', \'Cashier\', \'1240 Ambient Avenue\', \'326-555-8456\', \'BM1\'),\n (\'Lenina\', \'Crowne\', \'Cashier\', \'281 Bumblepuppy Boulevard\', \'328-555-2349\',\n\'LC1\'),\n (\'Fanny\', \'Crowne\', \'Restocker\', \'1023 Bokanovsky Lane\', \'326-555-6329\',\n\'FC1\'),\n (\'Helmholtz\', \'Watson\', \'Janitor\', \'944 Soma Court\', \'329-555-2478\', \'HW1\');\n\nSHOW INDEXES FROM employees_example;\n+-------------------+------------+---------------+--------------+--------------\n+-----------+-------------+----------+--------+------+------------+---------+--\n------------+\n| Table             | Non_unique | Key_name      | Seq_in_index | Column_name \n | Collation | Cardinality | Sub_part | Packed | Null | Index_type | Comment |\nIndex_comment |\n+-------------------+------------+---------------+--------------+--------------\n+-----------+-------------+----------+--------+------+------------+---------+--\n------------+\n| employees_example |          0 | PRIMARY       |            1 | id          \n | A         |           7 |     NULL | NULL   |      | BTREE      |         |\n       |\n| employees_example |          0 | employee_code |            1 |\nemployee_code | A         |           7 |     NULL | NULL   |      | BTREE    \n |         |               |\n| employees_example |          1 | first_name    |            1 | first_name  \n | A         |        NULL |     NULL | NULL   |      | BTREE      |         |\n       |') WHERE help_topic_id = 466;
update help_topic set description = CONCAT(description, '\n| employees_example |          1 | first_name    |            2 | last_name   \n | A         |        NULL |     NULL | NULL   |      | BTREE      |         |\n       |\n+-------------------+------------+---------------+--------------+--------------\n+-----------+-------------+----------+--------+------+------------+---------+--\n------------+\n\nSELECT on a primary key:\n\nEXPLAIN SELECT * FROM employees_example WHERE id=1;\n+------+-------------+-------------------+-------+---------------+---------+---\n-----+-------+------+-------+\n| id   | select_type | table             | type  | possible_keys | key     |\nkey_len | ref   | rows | Extra |\n+------+-------------+-------------------+-------+---------------+---------+---\n-----+-------+------+-------+\n|    1 | SIMPLE      | employees_example | const | PRIMARY       | PRIMARY | 4\n   | const |    1 |       |\n+------+-------------+-------------------+-------+---------------+---------+---\n-----+-------+------+-------+\n\nThe type is const, which means that only one possible result could be\nreturned. Now, returning the same record but searching by their phone number:\n\nEXPLAIN SELECT * FROM employees_example WHERE home_phone=\'326-555-3492\';\n+------+-------------+-------------------+------+---------------+------+-------\n-+------+------+-------------+\n| id   | select_type | table             | type | possible_keys | key  |\nkey_len | ref  | rows | Extra       |\n+------+-------------+-------------------+------+---------------+------+-------\n-+------+------+-------------+\n|    1 | SIMPLE      | employees_example | ALL  | NULL          | NULL | NULL \n | NULL |    6 | Using where |\n+------+-------------+-------------------+------+---------------+------+-------\n-+------+------+-------------+\n\nHere, the type is All, which means no index could be used. Looking at the rows\ncount, a full table scan (all six rows) had to be performed in order to\nretrieve the record. If it\'s a requirement to search by phone number, an index\nwill have to be created.\n\nSHOW EXPLAIN example:\n\nSHOW EXPLAIN FOR 1;\n+------+-------------+-------+-------+---------------+------+---------+------+-\n-------+-------------+\n| id   | select_type | table | type  | possible_keys | key  | key_len | ref  |\nrows    | Extra       |\n+------+-------------+-------+-------+---------------+------+---------+------+-\n-------+-------------+\n|    1 | SIMPLE      | tbl   | index | NULL          | a    | 5       | NULL |\n1000107 | Using index |\n+------+-------------+-------+-------+---------------+------+---------+------+-\n-------+-------------+\n1 row in set, 1 warning (0.00 sec)\n\nExample of ref_or_null Optimization\n-----------------------------------\n\nSELECT * FROM table_name\n WHERE key_column=expr OR key_column IS NULL;\n\nref_or_null is something that often happens when you use subqueries with NOT\nIN as then one has to do an extra check for NULL values if the first value\ndidn\'t have a matching row.\n\nURL: https://mariadb.com/kb/en/explain/') WHERE help_topic_id = 466;
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (467,28,'EXPLAIN ANALYZE','The syntax for the EXPLAIN ANALYZE feature was changed to ANALYZE statement,\navailable since MariaDB 10.1.0. See ANALYZE statement.\n\nURL: https://mariadb.com/kb/en/explain-analyze/','','https://mariadb.com/kb/en/explain-analyze/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (468,28,'EXPLAIN FORMAT=JSON','Synopsis\n--------\n\nEXPLAIN FORMAT=JSON is a variant of EXPLAIN command that produces output in\nJSON form. The output always has one row which has only one column titled\n\"JSON\". The contents are a JSON representation of the query plan, formatted\nfor readability:\n\nEXPLAIN FORMAT=JSON SELECT * FROM t1 WHERE col1=1\\G\n\n*************************** 1. row ***************************\nEXPLAIN: {\n \"query_block\": {\n  \"select_id\": 1,\n  \"table\": {\n   \"table_name\": \"t1\",\n   \"access_type\": \"ALL\",\n   \"rows\": 1000,\n   \"filtered\": 100,\n   \"attached_condition\": \"(t1.col1 = 1)\"\n  }\n }\n}\n\nOutput is different from MySQL\n------------------------------\n\nThe output of MariaDB\'s EXPLAIN FORMAT=JSON is different from EXPLAIN\nFORMAT=JSON in MySQL.The reasons for that are:\n\n* MySQL\'s output has deficiencies. Some are listed here: EXPLAIN FORMAT=JSON\nin MySQL\n* The output of MySQL\'s EXPLAIN FORMAT=JSON is not defined. Even MySQL\nWorkbench has trouble parsing it (see this blog post).\n* MariaDB has query optimizations that MySQL does not have. Ergo, MariaDB\ngenerates query plans that MySQL does not generate.\n\nA (as yet incomplete) list of how MariaDB\'s output is different from MySQL can\nbe found here: EXPLAIN FORMAT=JSON differences from MySQL.\n\nOutput Format\n-------------\n\nTODO: MariaDB\'s output format description.\n\nURL: https://mariadb.com/kb/en/explain-format-json/','','https://mariadb.com/kb/en/explain-format-json/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (469,28,'DESCRIBE','Syntax\n------\n\n{DESCRIBE | DESC} tbl_name [col_name | wild]\n\nDescription\n-----------\n\nDESCRIBE provides information about the columns in a table. It is a shortcut\nfor SHOW COLUMNS FROM. These statements also display information for views.\n\ncol_name can be a column name, or a string containing the SQL \"%\" and \"_\"\nwildcard characters to obtain output only for the columns with names matching\nthe string. There is no need to enclose the string within quotes unless it\ncontains spaces or other special characters.\n\nDESCRIBE city;\n+------------+----------+------+-----+---------+----------------+\n| Field      | Type     | Null | Key | Default | Extra          |\n+------------+----------+------+-----+---------+----------------+\n| Id         | int(11)  | NO   | PRI | NULL    | auto_increment |\n| Name       | char(35) | YES  |     | NULL    |                |\n| Country    | char(3)  | NO   | UNI |         |                |\n| District   | char(20) | YES  | MUL |         |                |\n| Population | int(11)  | YES  |     | NULL    |                |\n+------------+----------+------+-----+---------+----------------+\n\nThe description for SHOW COLUMNS provides more information about the output\ncolumns.\n\nURL: https://mariadb.com/kb/en/describe/','','https://mariadb.com/kb/en/describe/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (470,29,'Identifier Names','Databases, tables, indexes, columns, aliases, views, stored routines,\ntriggers, events, variables, partitions, tablespaces, savepoints, labels,\nusers, roles, are collectively known as identifiers, and have certain rules\nfor naming.\n\nIdentifiers may be quoted using the backtick character - `. Quoting is\noptional for identifiers that don\'t contain special characters, or for\nidentifiers that are not reserved words. If the ANSI_QUOTES SQL_MODE flag is\nset, double quotes (\") can also be used to quote identifiers. If the MSSQL\nflag is set, square brackets ([ and ]) can be used for quoting.\n\nEven when using reserved words as names, fully qualified names do not need to\nbe quoted. For example, test.select has only one possible meaning, so it is\ncorrectly parsed even without quotes.\n\nUnquoted\n--------\n\nThe following characters are valid, and allow identifiers to be unquoted:\n\n* ASCII: [0-9,a-z,A-Z$_] (numerals 0-9, basic Latin letters, both lowercase\nand uppercase, dollar sign, underscore)\n* Extended: U+0080 .. U+FFFF\n\nQuoted\n------\n\nThe following characters are valid, but identifiers using them must be quoted:\n\n* ASCII: U+0001 .. U+007F (full Unicode Basic Multilingual Plane (BMP) except\nfor U+0000)\n* Extended: U+0080 .. U+FFFF \n* Identifier quotes can themselves be used as part of an identifier, as long\nas they are quoted.\n\nFurther Rules\n-------------\n\nThere are a number of other rules for identifiers:\n\n* Identifiers are stored as Unicode (UTF-8)\n* Identifiers may or may not be case-sensitive. See Indentifier\nCase-sensitivity.\n* Database, table and column names can\'t end with space characters\n* Identifier names may begin with a numeral, but can\'t only contain numerals\nunless quoted.\n* An identifier starting with a numeral, followed by an \'e\', may be parsed as\na floating point number, and needs to be quoted.\n* Identifiers are not permitted to contain the ASCII NUL character (U+0000)\nand supplementary characters (U+10000 and higher).\n* Names such as 5e6, 9e are not prohibited, but it\'s strongly recommended not\nto use them, as they could lead to ambiguity in certain contexts, being\ntreated as a number or expression.\n* User variables cannot be used as part of an identifier, or as an identifier\nin an SQL statement.\n\nQuote Character\n---------------\n\nThe regular quote character is the backtick character - `, but if the\nANSI_QUOTES SQL_MODE option is specified, a regular double quote - \" may be\nused as well.\n\nThe backtick character can be used as part of an identifier. In that case the\nidentifier needs to be quoted. The quote character can be the backtick, but in\nthat case, the backtick in the name must be escaped with another backtick.\n\nMaximum Length\n--------------\n\n* Databases, tables, columns, indexes, constraints, stored routines, triggers,\nevents, views, tablespaces, servers and log file groups have a maximum length\nof 64 characters.\n* Compound statement labels have a maximum length of 16 characters\n* Aliases have a maximum length of 256 characters, except for column aliases\nin CREATE VIEW statements, which are checked against the maximum column length\nof 64 characters (not the maximum alias length of 256 characters).\n* Users have a maximum length of 80 characters.\n* Roles have a maximum length of 128 characters.\n* Multi-byte characters do not count extra towards towards the character limit.\n\nMultiple Identifiers\n--------------------\n\nMariaDB allows the column name to be used on its own if the reference will be\nunambiguous, or the table name to be used with the column name, or all three\nof the database, table and column names. A period is used to separate the\nidentifiers, and the period can be surrounded by spaces.\n\nExamples\n--------\n\nUsing the period to separate identifiers:\n\nCREATE TABLE t1 (i int);\n\nINSERT INTO t1(i) VALUES (10);\n\nSELECT i FROM t1;\n+------+\n| i    |\n+------+\n|   10 |\n+------+\n\nSELECT t1.i FROM t1;\n+------+\n| i    |\n+------+\n|   10 |\n+------+\n\nSELECT test.t1.i FROM t1;\n+------+\n| i    |\n+------+\n|   10 |\n+------+\n\nThe period can be separated by spaces:\n\nSELECT test . t1 . i FROM t1;\n+------+\n| i    |\n+------+\n|   10 |\n+------+\n\nResolving ambiguity:\n\nCREATE TABLE t2 (i int);\n\nSELECT i FROM t1 LEFT JOIN t2 ON t1.i=t2.i;\nERROR 1052 (23000): Column \'i\' in field list is ambiguous\n\nSELECT t1.i FROM t1 LEFT JOIN t2 ON t1.i=t2.i;\n+------+\n| i    |\n+------+\n|   10 |\n+------+\n\nCreating a table with characters that require quoting:\n\nCREATE TABLE 123% (i int);\nERROR 1064 (42000): You have an error in your SQL syntax; \n check the manual that corresponds to your MariaDB server version for the\nright syntax \n to use near \'123% (i int)\' at line 1\n\nCREATE TABLE `123%` (i int);\nQuery OK, 0 rows affected (0.85 sec)\n\nCREATE TABLE `TABLE` (i int);\nQuery OK, 0 rows affected (0.36 sec)\n\nUsing double quotes as a quoting character:\n\nCREATE TABLE \"SELECT\" (i int);\nERROR 1064 (42000): You have an error in your SQL syntax; \n check the manual that corresponds to your MariaDB server version for the\nright syntax \n to use near \'\"SELECT\" (i int)\' at line 1\n\nSET sql_mode=\'ANSI_QUOTES\';\nQuery OK, 0 rows affected (0.03 sec)\n\nCREATE TABLE \"SELECT\" (i int);\nQuery OK, 0 rows affected (0.46 sec)\n\nUsing an identifier quote as part of an identifier name:\n\nSHOW VARIABLES LIKE \'sql_mode\';\n+---------------+-------------+\n| Variable_name | Value       |\n+---------------+-------------+\n| sql_mode      | ANSI_QUOTES |\n+---------------+-------------+\n\nCREATE TABLE \"fg`d\" (i int);\nQuery OK, 0 rows affected (0.34 sec)\n\nCreating the table named * (Unicode number: U+002A) requires quoting.\n\nCREATE TABLE `*` (a INT);\n\nFloating point ambiguity:\n\nCREATE TABLE 8984444cce5d (x INT);\nQuery OK, 0 rows affected (0.38 sec)\n\nCREATE TABLE 8981e56cce5d (x INT);\nERROR 1064 (42000): You have an error in your SQL syntax; \n check the manual that corresponds to your MariaDB server version for the\nright syntax \n to use near \'8981e56cce5d (x INT)\' at line 1\n\nCREATE TABLE `8981e56cce5d` (x INT);\nQuery OK, 0 rows affected (0.39 sec)\n\nURL: https://mariadb.com/kb/en/identifier-names/','','https://mariadb.com/kb/en/identifier-names/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (471,29,'Identifier Case-sensitivity','Whether objects are case-sensitive or not is partly determined by the\nunderlying operating system. Unix-based systems are case-sensitive, Windows is\nnot, while Mac OS X is usually case-insensitive by default, but devices can be\nconfigured as case-sensitive using Disk Utility.\n\nDatabase, table, table aliases and trigger names are affected by the systems\ncase-sensitivity, while index, column, column aliases, stored routine and\nevent names are never case sensitive.\n\nLog file group name are case sensitive.\n\nThe lower_case_table_names server system variable plays a key role. It\ndetermines whether table names, aliases and database names are compared in a\ncase-sensitive manner. If set to 0 (the default on Unix-based systems), table\nnames and aliases and database names are compared in a case-sensitive manner.\nIf set to 1 (the default on Windows), names are stored in lowercase and not\ncompared in a case-sensitive manner. If set to 2 (the default on Mac OS X),\nnames are stored as declared, but compared in lowercase.\n\nIt is thus possible to make Unix-based systems behave like Windows and ignore\ncase-sensitivity, but the reverse is not true, as the underlying Windows\nfilesystem can not support this.\n\nEven on case-insensitive systems, you are required to use the same case\nconsistently within the same statement. The following statement fails, as it\nrefers to the table name in a different case.\n\nSELECT * FROM a_table WHERE A_table.id>10;\n\nFor a full list of identifier naming rules, see Identifier Names.\n\nPlease note that lower_case_table_names is a database initialization\nparameter. This means that, along with innodb_page_size, this variable must be\nset before running mysql_install_db, and will not change the behavior of\nservers unless applied before the creation of core system databases.\n\nURL: https://mariadb.com/kb/en/identifier-case-sensitivity/','','https://mariadb.com/kb/en/identifier-case-sensitivity/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (472,29,'Binary Literals','Binary literals can be written in one of the following formats: b\'value\',\nB\'value\' or 0bvalue, where value is a string composed by 0 and 1 digits.\n\nBinary literals are interpreted as binary strings, and are convenient to\nrepresent VARBINARY, BINARY or BIT values.\n\nTo convert a binary literal into an integer, just add 0.\n\nExamples\n--------\n\nPrinting the value as a binary string:\n\nSELECT 0b1000001;\n+-----------+\n| 0b1000001 |\n+-----------+\n| A         |\n+-----------+\n\nConverting the same value into a number:\n\nSELECT 0b1000001+0;\n+-------------+\n| 0b1000001+0 |\n+-------------+\n|          65 |\n+-------------+\n\nURL: https://mariadb.com/kb/en/binary-literals/','','https://mariadb.com/kb/en/binary-literals/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (473,29,'Boolean Literals','In MariaDB, FALSE is a synonym of 0 and TRUE is a synonym of 1. These\nconstants are case insensitive, so TRUE, True, and true are equivalent.\n\nThese terms are not synonyms of 0 and 1 when used with the IS operator. So,\nfor example, 10 IS TRUE returns 1, while 10 = TRUE returns 0 (because 1 != 10).\n\nThe IS operator accepts a third constant exists: UNKNOWN. It is always a\nsynonym of NULL.\n\nTRUE and FALSE are reserved words, while UNKNOWN is not.\n\nURL: https://mariadb.com/kb/en/sql-language-structure-boolean-literals/','','https://mariadb.com/kb/en/sql-language-structure-boolean-literals/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (474,29,'Date and Time Literals','Standard syntaxes\n-----------------\n\nMariaDB supports the SQL standard and ODBC syntaxes for DATE, TIME and\nTIMESTAMP literals.\n\nSQL standard syntax:\n\n* DATE \'string\'\n* TIME \'string\'\n* TIMESTAMP \'string\'\n\nODBC syntax:\n\n* {d \'string\'}\n* {t \'string\'}\n* {ts \'string\'}\n\nThe timestamp literals are treated as DATETIME literals, because in MariaDB\nthe range of DATETIME is closer to the TIMESTAMP range in the SQL standard.\n\nstring is a string in a proper format, as explained below.\n\nDATE literals\n-------------\n\nA DATE string is a string in one of the following formats: \'YYYY-MM-DD\' or\n\'YY-MM-DD\'. Note that any punctuation character can be used as delimiter. All\ndelimiters must consist of 1 character. Different delimiters can be used in\nthe same string. Delimiters are optional (but if one delimiter is used, all\ndelimiters must be used).\n\nA DATE literal can also be an integer, in one of the following formats:\nYYYYMMDD or YYMMDD.\n\nAll the following DATE literals are valid, and they all represent the same\nvalue:\n\n\'19940101\'\n\'940101\'\n\'1994-01-01\'\n\'94/01/01\'\n\'1994-01/01\'\n\'94:01!01\'\n19940101\n940101\n\nDATETIME literals\n-----------------\n\nA DATETIME string is a string in one of the following formats: \'YYYY-MM-DD\nHH:MM:SS\' or \'YY-MM-DD HH:MM:SS\'. Note that any punctuation character can be\nused as delimiter for the date part and for the time part. All delimiters must\nconsist of 1 character. Different delimiters can be used in the same string.\nThe hours, minutes and seconds parts can consist of one character. For this\nreason, delimiters are mandatory for DATETIME literals.\n\nThe delimiter between the date part and the time part can be a T or any\nsequence of space characters (including tabs, new lines and carriage returns).\n\nA DATETIME literal can also be a number, in one of the following formats:\nYYYYMMDDHHMMSS, YYMMDDHHMMSS, YYYYMMDD or YYMMDD. In this case, all the time\nsubparts must consist of 2 digits.\n\nAll the following DATE literals are valid, and they all represent the same\nvalue:\n\n\'1994-01-01T12:30:03\'\n\'1994/01/01\\n\\t 12+30+03\'\n\'1994/01\\\\01\\n\\t 12+30-03\'\n\'1994-01-01 12:30:3\'\n\nTIME literals\n-------------\n\nA TIME string is a string in one of the following formats: \'D HH:MM:SS\',\n\'HH:MM:SS, \'D HH:MM\', \'HH:MM\', \'D HH\', or \'SS\'. D is a value from 0 to 34\nwhich represents days. : is the only allowed delimiter for TIME literals.\nDelimiters are mandatory, with an exception: the \'HHMMSS\' format is allowed.\nWhen delimiters are used, each part of the literal can consist of one\ncharacter.\n\nA TIME literal can also be a number in one of the following formats: HHMMSS,\nMMSS, or SS.\n\nThe following literals are equivalent:\n\n\'09:05:00\'\n\'9:05:0\'\n\'9:5:0\'\n\'090500\'\n\n2-digit years\n-------------\n\nThe year part in DATE and DATETIME literals is determined as follows:\n\n* 70 - 99 = 1970 - 1999\n* 00 - 69 = 2000 - 2069\n\nMicroseconds\n------------\n\nDATETIME and TIME literals can have an optional microseconds part. For both\nstring and numeric forms, it is expressed as a decimal part. Up to 6 decimal\ndigits are allowed. Examples:\n\n\'12:30:00.123456\'\n123000.123456\n\nSee Microseconds in MariaDB for details.\n\nDate and time literals and the SQL_MODE\n---------------------------------------\n\nUnless the SQL_MODE NO_ZERO_DATE flag is set, some special values are allowed:\nthe \'0000-00-00\' DATE, the \'00:00:00\' TIME, and the 0000-00-00 00:00:00\nDATETIME.\n\nIf the ALLOW_INVALID_DATES flag is set, the invalid dates (for example, 30th\nFebruary) are allowed. If not, if the NO_ZERO_DATE is set, an error is\nproduced; otherwise, a zero-date is returned.\n\nUnless the NO_ZERO_IN_DATE flag is set, each subpart of a date or time value\n(years, hours...) can be set to 0.\n\nURL: https://mariadb.com/kb/en/date-and-time-literals/','','https://mariadb.com/kb/en/date-and-time-literals/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (475,29,'Hexadecimal Literals','Hexadecimal literals can be written using any of the following syntaxes:\n\n* x\'value\'\n* X\'value\' (SQL standard)\n* 0xvalue (ODBC)\n\nvalue is a sequence of hexadecimal digits (from 0 to 9 and from A to F). The\ncase of the digits does not matter. With the first two syntaxes, value must\nconsist of an even number of digits. With the last syntax, digits can be even,\nand they are treated as if they had an extra 0 at the beginning.\n\nNormally, hexadecimal literals are interpreted as binary string, where each\npair of digits represents a character. When used in a numeric context, they\nare interpreted as integers. (See the example below). In no case can a\nhexadecimal literal be a decimal number.\n\nThe first two syntaxes; X\'value\' and x\'value, follow the SQL standard, and\nbehave as a string in all contexts in MariaDB since MariaDB 10.0.3 and MariaDB\n5.5.31 (fixing MDEV-4489). The latter syntax, 0xvalue, is a MySQL/MariaDB\nextension for hex hybrids and behaves as a string or as a number depending on\ncontext. MySQL treats all syntaxes the same, so there may be different results\nin MariaDB and MySQL (see below).\n\nExamples\n--------\n\nRepresenting the a character with the three syntaxes explained above:\n\nSELECT x\'61\', X\'61\', 0x61;\n+-------+-------+------+\n| x\'61\' | X\'61\' | 0x61 |\n+-------+-------+------+\n| a     | a     | a    |\n+-------+-------+------+\n\nHexadecimal literals in a numeric context:\n\nSELECT 0 + 0xF, -0xF;\n+---------+------+\n| 0 + 0xF | -0xF |\n+---------+------+\n|      15 |  -15 |\n+---------+------+\n\nFun with Types\n--------------\n\nCREATE TABLE t1 (a INT, b VARCHAR(10));\nINSERT INTO t1 VALUES (0x31, 0x61),(COALESCE(0x31), COALESCE(0x61));\n\nSELECT * FROM t1;\n+------+------+\n| a    | b    |\n+------+------+\n|   49 | a    |\n|    1 | a    |\n+------+------+\n\nThe reason for the differing results above is that when 0x31 is inserted\ndirectly to the column, it\'s treated as a number, while when 0x31 is passed to\nCOALESCE(), it\'s treated as a string, because:\n\n* HEX values have a string data type by default.\n* COALESCE() has the same data type as the argument.\n\nDifferences Between MariaDB and MySQL\n-------------------------------------\n\nSELECT x\'0a\'+0;\n+---------+\n| x\'0a\'+0 |\n+---------+\n|       0 |\n+---------+\n1 row in set, 1 warning (0.00 sec)\n\nWarning (Code 1292): Truncated incorrect DOUBLE value: \'\\x0A\'\n\nSELECT X\'0a\'+0;\n+---------+\n| X\'0a\'+0 |\n+---------+\n|       0 |\n+---------+\n1 row in set, 1 warning (0.00 sec)\n\nWarning (Code 1292): Truncated incorrect DOUBLE value: \'\\x0A\'\n\nSELECT 0x0a+0;\n+--------+\n| 0x0a+0 |\n+--------+\n|     10 |\n+--------+\n\nIn MySQL (up until at least MySQL 8.0.26):\n\nSELECT x\'0a\'+0;\n+---------+\n| x\'0a\'+0 |\n+---------+\n|      10 |\n+---------+\n\nSELECT X\'0a\'+0;\n+---------+\n| X\'0a\'+0 |\n+---------+\n|      10 |\n+---------+\n\nSELECT 0x0a+0;\n+--------+\n| 0x0a+0 |\n+--------+\n|     10 |\n+--------+\n\nURL: https://mariadb.com/kb/en/hexadecimal-literals/','','https://mariadb.com/kb/en/hexadecimal-literals/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (476,29,'Identifier Qualifiers','Qualifiers are used within SQL statements to reference data structures, such\nas databases, tables, or columns. For example, typically a SELECT query\ncontains references to some columns and at least one table.\n\nQualifiers can be composed by one or more identifiers, where the initial parts\naffect the context within which the final identifier is interpreted:\n\n* For a database, only the database identifier needs to be specified.\n* For objects which are contained in a database (like tables, views,\nfunctions, etc) the database identifier can be specified. If no database is\nspecified, the current database is assumed (see USE and DATABASE() for more\ndetails). If there is no default database and no database is specified, an\nerror is issued.\n* For column names, the table and the database are generally obvious from the\ncontext of the statement. It is however possible to specify the table\nidentifier, or the database identifier plus the table identifier.\n* An identifier is fully-qualified if it contains all possible qualifiers, for\nexample, the following column is fully qualified: db_name.tbl_name.col_name.\n\nIf a qualifier is composed by more than one identifier, a dot (.) must be used\nas a separator. All identifiers can be quoted individually. Extra spacing\n(including new lines and tabs) is allowed.\n\nAll the following examples are valid:\n\n* db_name.tbl_name.col_name\n* tbl_name\n* `db_name`.`tbl_name`.`col_name`\n* `db_name` . `tbl_name`\n* db_name. tbl_name\n\nIf a table identifier is prefixed with a dot (.), the default database is\nassumed. This syntax is supported for ODBC compliance, but has no practical\neffect on MariaDB. These qualifiers are equivalent:\n\n* tbl_name\n* . tbl_name\n* .`tbl_name`\n* . `tbl_name`\n\nFor DML statements, it is possible to specify a list of the partitions using\nthe PARTITION clause. See Partition Pruning and Selection for details.\n\nURL: https://mariadb.com/kb/en/identifier-qualifiers/','','https://mariadb.com/kb/en/identifier-qualifiers/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (477,29,'Identifier to File Name Mapping','Some identifiers map to a file name on the filesystem. Databases each have\ntheir own directory, while, depending on the storage engine, table names and\nindex names may map to a file name.\n\nNot all characters that are allowed in table names can be used in file names.\nEvery filesystem has its own rules of what characters can be used in file\nnames. To let the user create tables using all characters allowed in the SQL\nStandard and to not depend on whatever particular filesystem a particular\ndatabase resides, MariaDB encodes \"potentially unsafe\" characters in the table\nname to derive the corresponding file name.\n\nThis is implemented using a special character set. MariaDB converts a table\nname to the \"filename\" character set to get the file name for this table. And\nit converts the file name from the \"filename\" character set to, for example,\nutf8 to get the table name for this file name.\n\nThe conversion rules are as follows: if the identifier is made up only of\nbasic Latin numbers, letters and/or the underscore character, the encoding\nmatches the name (see however Identifier Case Sensitivity). Otherwise they are\nencoded according to the following table:\n\n+-----------------+------------+-----------+--------+-----------+-----------+\n| Code Range      | Pattern    | Number    | Used   | Unused    | Blocks    |\n+-----------------+------------+-----------+--------+-----------+-----------+\n| 00C0..017F      | [@][0..4][ | 5*20= 100 | 97     | 3         | Latin-1   |\n|                 | ..z]       |           |        |           | Supplemen |\n|                 |            |           |        |           |  + Latin  |\n|                 |            |           |        |           | Extended- |\n|                 |            |           |        |           |           |\n+-----------------+------------+-----------+--------+-----------+-----------+\n| 0370..03FF      | [@][5..9][ | 5*20= 100 | 88     | 12        | Greek     |\n|                 | ..z]       |           |        |           | and       |\n|                 |            |           |        |           | Coptic    |\n+-----------------+------------+-----------+--------+-----------+-----------+\n| 0400..052F      | [@][g..z][ | 20*7= 140 | 137    | 3         | Cyrillic  |\n|                 | ..6]       |           |        |           | +         |\n|                 |            |           |        |           | Cyrillic  |\n|                 |            |           |        |           | Supplemen |\n|                 |            |           |        |           |           |\n+-----------------+------------+-----------+--------+-----------+-----------+\n| 0530..058F      | [@][g..z][ | 20*2= 40  | 38     | 2         | Armenian  |\n|                 | ..8]       |           |        |           |           |\n+-----------------+------------+-----------+--------+-----------+-----------+\n| 2160..217F      | [@][g..z][ | 20*1= 20  | 16     | 4         | Number    |\n|                 | ]          |           |        |           | Forms     |\n+-----------------+------------+-----------+--------+-----------+-----------+\n| 0180..02AF      | [@][g..z][ | 20*11=220 | 203    | 17        | Latin     |\n|                 | ..k]       |           |        |           | Extended- |\n|                 |            |           |        |           |  + IPA    |\n|                 |            |           |        |           | Extension |\n|                 |            |           |        |           |           |\n+-----------------+------------+-----------+--------+-----------+-----------+\n| 1E00..1EFF      | [@][g..z][ | 20*7= 140 | 136    | 4         | Latin     |\n|                 | ..r]       |           |        |           | Extended  |\n|                 |            |           |        |           | Additiona |\n|                 |            |           |        |           |           |\n+-----------------+------------+-----------+--------+-----------+-----------+\n| 1F00..1FFF      | [@][g..z][ | 20*8= 160 | 144    | 16        | Greek     |\n|                 | ..z]       |           |        |           | Extended  |\n+-----------------+------------+-----------+--------+-----------+-----------+\n| .... ....       | [@][a..f][ | 6*20= 120 | 0      | 120       | RESERVED  |\n|                 | ..z]       |           |        |           |           |\n+-----------------+------------+-----------+--------+-----------+-----------+\n| 24B6..24E9      | [@][@][a.. | 26        | 26     | 0         | Enclosed  |\n|                 | ]          |           |        |           | Alphanume |\n|                 |            |           |        |           | ics       |\n+-----------------+------------+-----------+--------+-----------+-----------+\n| FF21..FF5A      | [@][a..z][ | 26        | 26     | 0         | Halfwidth |\n|                 | ]          |           |        |           | and       |\n|                 |            |           |        |           | Fullwidth |\n|                 |            |           |        |           | forms     |\n+-----------------+------------+-----------+--------+-----------+-----------+\n\nCode Range values are UCS-2.\n\nAll of this encoding happens transparently at the filesystem level with one\nexception. Until MySQL 5.1.6, an old encoding was used. Identifiers created in\na version before MySQL 5.1.6, and which haven\'t been updated to the new\nencoding, the server prefixes mysql50 to their name.\n\nExamples\n--------\n\nFind the file name for a table with a non-Latin1 name:\n\nselect cast(convert(\"this_is_таблица\" USING filename) as binary);\n+------------------------------------------------------------------+\n| cast(convert(\"this_is_таблица\" USING filename) as binary)        |\n+------------------------------------------------------------------+\n| this_is_@y0@g0@h0@r0@o0@i1@g0                                    |\n+------------------------------------------------------------------+\n\nFind the table name for a file name:\n\nselect convert(_filename \"this_is_@y0@g0@h0@r0@o0@i1@g0\" USING utf8);\n+---------------------------------------------------------------+\n| convert(_filename \"this_is_@y0@g0@h0@r0@o0@i1@g0\" USING utf8) |\n+---------------------------------------------------------------+\n| this_is_таблица                                               |\n+---------------------------------------------------------------+\n\nAn old table created before MySQL 5.1.6, with the old encoding:\n\nSHOW TABLES;\n+--------------------+\n| Tables_in_test     |\n+--------------------+\n| #mysql50#table@1   |\n+--------------------+\n\nThe prefix needs to be supplied to reference this table:\n\nSHOW COLUMNS FROM `table@1`;\nERROR 1146 (42S02): Table \'test.table@1\' doesn\'t exist\n\nSHOW COLUMNS FROM `#mysql50#table@1`;\n+-------+---------+------+-----+---------+-------+\n| Field | Type    | Null | Key | Default | Extra |\n+-------+---------+------+-----+---------+-------+\n| i     | int(11) | YES  |     | NULL    |       |\n+-------+---------+------+-----+---------+-------+\n\nURL: https://mariadb.com/kb/en/identifier-to-file-name-mapping/','','https://mariadb.com/kb/en/identifier-to-file-name-mapping/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (478,29,'Numeric Literals','Numeric literals are written as a sequence of digits from 0 to 9. Initial\nzeros are ignored. A sign can always precede the digits, but it is optional\nfor positive numbers. In decimal numbers, the integer part and the decimal\npart are divided with a dot (.).\n\nIf the integer part is zero, it can be omitted, but the literal must begin\nwith a dot.\n\nThe notation with exponent can be used. The exponent is preceded by an E or e\ncharacter. The exponent can be preceded by a sign and must be an integer. A\nnumber N with an exponent part X, is calculated as N * POW(10, X).\n\nIn some cases, adding zeroes at the end of a decimal number can increment the\nprecision of the expression where the number is used. For example, PI() by\ndefault returns a number with 6 decimal digits. But the PI()+0.0000000000\nexpression (with 10 zeroes) returns a number with 10 decimal digits.\n\nHexadecimal literals are interpreted as numbers when used in numeric contexts.\n\nExamples\n--------\n\n10\n+10\n-10\n\nAll these literals are equivalent:\n\n0.1\n.1\n+0.1\n+.1\n\nWith exponents:\n\n0.2E3 -- 0.2 * POW(10, 3) = 200\n.2e3\n.2e+2\n1.1e-10 -- 0.00000000011\n-1.1e10 -- -11000000000\n\nURL: https://mariadb.com/kb/en/numeric-iterals/','','https://mariadb.com/kb/en/numeric-iterals/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (479,29,'Reserved Words','The following is a list of all reserved words in MariaDB.\n\nReserved words cannot be used as Identifiers, unless they are quoted.\n\nThe definitive list of reserved words for each version can be found by\nexamining the sql/lex.h and sql/sql_yacc.yy files.\n\nReserved Words\n--------------\n\n+--------------------------------------------+--------------------------------+\n| Keyword                                    | Notes                          |\n+--------------------------------------------+--------------------------------+\n| ACCESSIBLE                                 |                                |\n+--------------------------------------------+--------------------------------+\n| ADD                                        |                                |\n+--------------------------------------------+--------------------------------+\n| ALL                                        |                                |\n+--------------------------------------------+--------------------------------+\n| ALTER                                      |                                |\n+--------------------------------------------+--------------------------------+\n| ANALYZE                                    |                                |\n+--------------------------------------------+--------------------------------+\n| AND                                        |                                |\n+--------------------------------------------+--------------------------------+\n| AS                                         |                                |\n+--------------------------------------------+--------------------------------+\n| ASC                                        |                                |\n+--------------------------------------------+--------------------------------+\n| ASENSITIVE                                 |                                |\n+--------------------------------------------+--------------------------------+\n| BEFORE                                     |                                |\n+--------------------------------------------+--------------------------------+\n| BETWEEN                                    |                                |\n+--------------------------------------------+--------------------------------+\n| BIGINT                                     |                                |\n+--------------------------------------------+--------------------------------+\n| BINARY                                     |                                |\n+--------------------------------------------+--------------------------------+\n| BLOB                                       |                                |\n+--------------------------------------------+--------------------------------+\n| BOTH                                       |                                |\n+--------------------------------------------+--------------------------------+\n| BY                                         |                                |\n+--------------------------------------------+--------------------------------+\n| CALL                                       |                                |\n+--------------------------------------------+--------------------------------+\n| CASCADE                                    |                                |\n+--------------------------------------------+--------------------------------+\n| CASE                                       |                                |\n+--------------------------------------------+--------------------------------+\n| CHANGE                                     |                                |\n+--------------------------------------------+--------------------------------+\n| CHAR                                       |                                |\n+--------------------------------------------+--------------------------------+\n| CHARACTER                                  |                                |\n+--------------------------------------------+--------------------------------+\n| CHECK                                      |                                |\n+--------------------------------------------+--------------------------------+\n| COLLATE                                    |                                |\n+--------------------------------------------+--------------------------------+\n| COLUMN                                     |                                |\n+--------------------------------------------+--------------------------------+\n| CONDITION                                  |                                |\n+--------------------------------------------+--------------------------------+\n| CONSTRAINT                                 |                                |\n+--------------------------------------------+--------------------------------+\n| CONTINUE                                   |                                |\n+--------------------------------------------+--------------------------------+\n| CONVERT                                    |                                |\n+--------------------------------------------+--------------------------------+\n| CREATE                                     |                                |\n+--------------------------------------------+--------------------------------+\n| CROSS                                      |                                |\n+--------------------------------------------+--------------------------------+\n| CURRENT_DATE                               |                                |\n+--------------------------------------------+--------------------------------+\n| CURRENT_ROLE                               |                                |\n+--------------------------------------------+--------------------------------+\n| CURRENT_TIME                               |                                |\n+--------------------------------------------+--------------------------------+\n| CURRENT_TIMESTAMP                          |                                |\n+--------------------------------------------+--------------------------------+\n| CURRENT_USER                               |                                |\n+--------------------------------------------+--------------------------------+\n| CURSOR                                     |                                |\n+--------------------------------------------+--------------------------------+\n| DATABASE                                   |                                |\n+--------------------------------------------+--------------------------------+\n| DATABASES                                  |                                |\n+--------------------------------------------+--------------------------------+\n| DAY_HOUR                                   |                                |\n+--------------------------------------------+--------------------------------+\n| DAY_MICROSECOND                            |                                |\n+--------------------------------------------+--------------------------------+\n| DAY_MINUTE                                 |                                |\n+--------------------------------------------+--------------------------------+\n| DAY_SECOND                                 |                                |\n+--------------------------------------------+--------------------------------+\n| DEC                                        |                                |\n+--------------------------------------------+--------------------------------+\n| DECIMAL                                    |                                |\n+--------------------------------------------+--------------------------------+\n| DECLARE                                    |                                |\n+--------------------------------------------+--------------------------------+\n| DEFAULT                                    |                                |\n+--------------------------------------------+--------------------------------+\n| DELAYED                                    |                                |\n+--------------------------------------------+--------------------------------+\n| DELETE                                     |                                |\n+--------------------------------------------+--------------------------------+\n| DELETE_DOMAIN_ID                           |                                |\n+--------------------------------------------+--------------------------------+\n| DESC                                       |                                |\n+--------------------------------------------+--------------------------------+\n| DESCRIBE                                   |                                |\n+--------------------------------------------+--------------------------------+\n| DETERMINISTIC                              |                                |\n+--------------------------------------------+--------------------------------+\n| DISTINCT                                   |                                |\n+--------------------------------------------+--------------------------------+\n| DISTINCTROW                                |                                |\n+--------------------------------------------+--------------------------------+\n| DIV                                        |                                |\n+--------------------------------------------+--------------------------------+\n| DO_DOMAIN_IDS                              |                                |\n+--------------------------------------------+--------------------------------+\n| DOUBLE                                     |                                |\n+--------------------------------------------+--------------------------------+\n| DROP                                       |                                |\n+--------------------------------------------+--------------------------------+\n| DUAL                                       |                                |\n+--------------------------------------------+--------------------------------+\n| EACH                                       |                                |\n+--------------------------------------------+--------------------------------+\n| ELSE                                       |                                |\n+--------------------------------------------+--------------------------------+\n| ELSEIF                                     |                                |\n+--------------------------------------------+--------------------------------+\n| ENCLOSED                                   |                                |\n+--------------------------------------------+--------------------------------+\n| ESCAPED                                    |                                |\n+--------------------------------------------+--------------------------------+\n| EXCEPT                                     | Added in MariaDB 10.3.0        |\n+--------------------------------------------+--------------------------------+\n| EXISTS                                     |                                |\n+--------------------------------------------+--------------------------------+\n| EXIT                                       |                                |\n+--------------------------------------------+--------------------------------+\n| EXPLAIN                                    |                                |\n+--------------------------------------------+--------------------------------+\n| FALSE                                      |                                |\n+--------------------------------------------+--------------------------------+\n| FETCH                                      |                                |\n+--------------------------------------------+--------------------------------+\n| FLOAT                                      |                                |\n+--------------------------------------------+--------------------------------+\n| FLOAT4                                     |                                |\n+--------------------------------------------+--------------------------------+\n| FLOAT8                                     |                                |\n+--------------------------------------------+--------------------------------+\n| FOR                                        |                                |\n+--------------------------------------------+--------------------------------+\n| FORCE                                      |                                |\n+--------------------------------------------+--------------------------------+\n| FOREIGN                                    |                                |\n+--------------------------------------------+--------------------------------+\n| FROM                                       |                                |\n+--------------------------------------------+--------------------------------+\n| FULLTEXT                                   |                                |\n+--------------------------------------------+--------------------------------+\n| GENERAL                                    |                                |\n+--------------------------------------------+--------------------------------+\n| GRANT                                      |                                |\n+--------------------------------------------+--------------------------------+\n| GROUP                                      |                                |\n+--------------------------------------------+--------------------------------+\n| HAVING                                     |                                |\n+--------------------------------------------+--------------------------------+\n| HIGH_PRIORITY                              |                                |\n+--------------------------------------------+--------------------------------+\n| HOUR_MICROSECOND                           |                                |\n+--------------------------------------------+--------------------------------+\n| HOUR_MINUTE                                |                                |\n+--------------------------------------------+--------------------------------+\n| HOUR_SECOND                                |                                |','','https://mariadb.com/kb/en/reserved-words/');
update help_topic set description = CONCAT(description, '\n+--------------------------------------------+--------------------------------+\n| IF                                         |                                |\n+--------------------------------------------+--------------------------------+\n| IGNORE                                     |                                |\n+--------------------------------------------+--------------------------------+\n| IGNORE_DOMAIN_IDS                          |                                |\n+--------------------------------------------+--------------------------------+\n| IGNORE_SERVER_IDS                          |                                |\n+--------------------------------------------+--------------------------------+\n| IN                                         |                                |\n+--------------------------------------------+--------------------------------+\n| INDEX                                      |                                |\n+--------------------------------------------+--------------------------------+\n| INFILE                                     |                                |\n+--------------------------------------------+--------------------------------+\n| INNER                                      |                                |\n+--------------------------------------------+--------------------------------+\n| INOUT                                      |                                |\n+--------------------------------------------+--------------------------------+\n| INSENSITIVE                                |                                |\n+--------------------------------------------+--------------------------------+\n| INSERT                                     |                                |\n+--------------------------------------------+--------------------------------+\n| INT                                        |                                |\n+--------------------------------------------+--------------------------------+\n| INT1                                       |                                |\n+--------------------------------------------+--------------------------------+\n| INT2                                       |                                |\n+--------------------------------------------+--------------------------------+\n| INT3                                       |                                |\n+--------------------------------------------+--------------------------------+\n| INT4                                       |                                |\n+--------------------------------------------+--------------------------------+\n| INT8                                       |                                |\n+--------------------------------------------+--------------------------------+\n| INTEGER                                    |                                |\n+--------------------------------------------+--------------------------------+\n| INTERSECT                                  | Added in MariaDB 10.3.0        |\n+--------------------------------------------+--------------------------------+\n| INTERVAL                                   |                                |\n+--------------------------------------------+--------------------------------+\n| INTO                                       |                                |\n+--------------------------------------------+--------------------------------+\n| IS                                         |                                |\n+--------------------------------------------+--------------------------------+\n| ITERATE                                    |                                |\n+--------------------------------------------+--------------------------------+\n| JOIN                                       |                                |\n+--------------------------------------------+--------------------------------+\n| KEY                                        |                                |\n+--------------------------------------------+--------------------------------+\n| KEYS                                       |                                |\n+--------------------------------------------+--------------------------------+\n| KILL                                       |                                |\n+--------------------------------------------+--------------------------------+\n| LEADING                                    |                                |\n+--------------------------------------------+--------------------------------+\n| LEAVE                                      |                                |\n+--------------------------------------------+--------------------------------+\n| LEFT                                       |                                |\n+--------------------------------------------+--------------------------------+\n| LIKE                                       |                                |\n+--------------------------------------------+--------------------------------+\n| LIMIT                                      |                                |\n+--------------------------------------------+--------------------------------+\n| LINEAR                                     |                                |\n+--------------------------------------------+--------------------------------+\n| LINES                                      |                                |\n+--------------------------------------------+--------------------------------+\n| LOAD                                       |                                |\n+--------------------------------------------+--------------------------------+\n| LOCALTIME                                  |                                |\n+--------------------------------------------+--------------------------------+\n| LOCALTIMESTAMP                             |                                |\n+--------------------------------------------+--------------------------------+\n| LOCK                                       |                                |\n+--------------------------------------------+--------------------------------+\n| LONG                                       |                                |\n+--------------------------------------------+--------------------------------+\n| LONGBLOB                                   |                                |\n+--------------------------------------------+--------------------------------+\n| LONGTEXT                                   |                                |\n+--------------------------------------------+--------------------------------+\n| LOOP                                       |                                |\n+--------------------------------------------+--------------------------------+\n| LOW_PRIORITY                               |                                |\n+--------------------------------------------+--------------------------------+\n| MASTER_HEARTBEAT_PERIOD                    |                                |\n+--------------------------------------------+--------------------------------+\n| MASTER_SSL_VERIFY_SERVER_CERT              |                                |\n+--------------------------------------------+--------------------------------+\n| MATCH                                      |                                |\n+--------------------------------------------+--------------------------------+\n| MAXVALUE                                   |                                |\n+--------------------------------------------+--------------------------------+\n| MEDIUMBLOB                                 |                                |\n+--------------------------------------------+--------------------------------+\n| MEDIUMINT                                  |                                |\n+--------------------------------------------+--------------------------------+\n| MEDIUMTEXT                                 |                                |\n+--------------------------------------------+--------------------------------+\n| MIDDLEINT                                  |                                |\n+--------------------------------------------+--------------------------------+\n| MINUTE_MICROSECOND                         |                                |\n+--------------------------------------------+--------------------------------+\n| MINUTE_SECOND                              |                                |\n+--------------------------------------------+--------------------------------+\n| MOD                                        |                                |\n+--------------------------------------------+--------------------------------+\n| MODIFIES                                   |                                |\n+--------------------------------------------+--------------------------------+\n| NATURAL                                    |                                |\n+--------------------------------------------+--------------------------------+\n| NOT                                        |                                |\n+--------------------------------------------+--------------------------------+\n| NO_WRITE_TO_BINLOG                         |                                |\n+--------------------------------------------+--------------------------------+\n| NULL                                       |                                |\n+--------------------------------------------+--------------------------------+\n| NUMERIC                                    |                                |\n+--------------------------------------------+--------------------------------+\n| OFFSET                                     | Added in MariaDB 10.6.0        |\n+--------------------------------------------+--------------------------------+\n| ON                                         |                                |\n+--------------------------------------------+--------------------------------+\n| OPTIMIZE                                   |                                |\n+--------------------------------------------+--------------------------------+\n| OPTION                                     |                                |\n+--------------------------------------------+--------------------------------+\n| OPTIONALLY                                 |                                |\n+--------------------------------------------+--------------------------------+\n| OR                                         |                                |\n+--------------------------------------------+--------------------------------+\n| ORDER                                      |                                |\n+--------------------------------------------+--------------------------------+\n| OUT                                        |                                |\n+--------------------------------------------+--------------------------------+\n| OUTER                                      |                                |\n+--------------------------------------------+--------------------------------+\n| OUTFILE                                    |                                |\n+--------------------------------------------+--------------------------------+\n| OVER                                       |                                |\n+--------------------------------------------+--------------------------------+\n| PAGE_CHECKSUM                              |                                |\n+--------------------------------------------+--------------------------------+\n| PARSE_VCOL_EXPR                            |                                |\n+--------------------------------------------+--------------------------------+\n| PARTITION                                  |                                |\n+--------------------------------------------+--------------------------------+\n| POSITION                                   |                                |\n+--------------------------------------------+--------------------------------+\n| PRECISION                                  |                                |\n+--------------------------------------------+--------------------------------+\n| PRIMARY                                    |                                |\n+--------------------------------------------+--------------------------------+\n| PROCEDURE                                  |                                |\n+--------------------------------------------+--------------------------------+\n| PURGE                                      |                                |\n+--------------------------------------------+--------------------------------+\n| RANGE                                      |                                |\n+--------------------------------------------+--------------------------------+\n| READ                                       |                                |\n+--------------------------------------------+--------------------------------+\n| READS                                      |                                |\n+--------------------------------------------+--------------------------------+\n| READ_WRITE                                 |                                |\n+--------------------------------------------+--------------------------------+\n| REAL                                       |                                |\n+--------------------------------------------+--------------------------------+\n| RECURSIVE                                  |                                |\n+--------------------------------------------+--------------------------------+\n| REF_SYSTEM_ID                              |                                |\n+--------------------------------------------+--------------------------------+\n| REFERENCES                                 |                                |\n+--------------------------------------------+--------------------------------+\n| REGEXP                                     |                                |\n+--------------------------------------------+--------------------------------+\n| RELEASE                                    |                                |\n+--------------------------------------------+--------------------------------+\n| RENAME                                     |                                |') WHERE help_topic_id = 479;
update help_topic set description = CONCAT(description, '\n+--------------------------------------------+--------------------------------+\n| REPEAT                                     |                                |\n+--------------------------------------------+--------------------------------+\n| REPLACE                                    |                                |\n+--------------------------------------------+--------------------------------+\n| REQUIRE                                    |                                |\n+--------------------------------------------+--------------------------------+\n| RESIGNAL                                   |                                |\n+--------------------------------------------+--------------------------------+\n| RESTRICT                                   |                                |\n+--------------------------------------------+--------------------------------+\n| RETURN                                     |                                |\n+--------------------------------------------+--------------------------------+\n| RETURNING                                  |                                |\n+--------------------------------------------+--------------------------------+\n| REVOKE                                     |                                |\n+--------------------------------------------+--------------------------------+\n| RIGHT                                      |                                |\n+--------------------------------------------+--------------------------------+\n| RLIKE                                      |                                |\n+--------------------------------------------+--------------------------------+\n| ROWS                                       |                                |\n+--------------------------------------------+--------------------------------+\n| SCHEMA                                     |                                |\n+--------------------------------------------+--------------------------------+\n| SCHEMAS                                    |                                |\n+--------------------------------------------+--------------------------------+\n| SECOND_MICROSECOND                         |                                |\n+--------------------------------------------+--------------------------------+\n| SELECT                                     |                                |\n+--------------------------------------------+--------------------------------+\n| SENSITIVE                                  |                                |\n+--------------------------------------------+--------------------------------+\n| SEPARATOR                                  |                                |\n+--------------------------------------------+--------------------------------+\n| SET                                        |                                |\n+--------------------------------------------+--------------------------------+\n| SHOW                                       |                                |\n+--------------------------------------------+--------------------------------+\n| SIGNAL                                     |                                |\n+--------------------------------------------+--------------------------------+\n| SLOW                                       |                                |\n+--------------------------------------------+--------------------------------+\n| SMALLINT                                   |                                |\n+--------------------------------------------+--------------------------------+\n| SPATIAL                                    |                                |\n+--------------------------------------------+--------------------------------+\n| SPECIFIC                                   |                                |\n+--------------------------------------------+--------------------------------+\n| SQL                                        |                                |\n+--------------------------------------------+--------------------------------+\n| SQLEXCEPTION                               |                                |\n+--------------------------------------------+--------------------------------+\n| SQLSTATE                                   |                                |\n+--------------------------------------------+--------------------------------+\n| SQLWARNING                                 |                                |\n+--------------------------------------------+--------------------------------+\n| SQL_BIG_RESULT                             |                                |\n+--------------------------------------------+--------------------------------+\n| SQL_CALC_FOUND_ROWS                        |                                |\n+--------------------------------------------+--------------------------------+\n| SQL_SMALL_RESULT                           |                                |\n+--------------------------------------------+--------------------------------+\n| SSL                                        |                                |\n+--------------------------------------------+--------------------------------+\n| STARTING                                   |                                |\n+--------------------------------------------+--------------------------------+\n| STATS_AUTO_RECALC                          |                                |\n+--------------------------------------------+--------------------------------+\n| STATS_PERSISTENT                           |                                |\n+--------------------------------------------+--------------------------------+\n| STATS_SAMPLE_PAGES                         |                                |\n+--------------------------------------------+--------------------------------+\n| STRAIGHT_JOIN                              |                                |\n+--------------------------------------------+--------------------------------+\n| TABLE                                      |                                |\n+--------------------------------------------+--------------------------------+\n| TERMINATED                                 |                                |\n+--------------------------------------------+--------------------------------+\n| THEN                                       |                                |\n+--------------------------------------------+--------------------------------+\n| TINYBLOB                                   |                                |\n+--------------------------------------------+--------------------------------+\n| TINYINT                                    |                                |\n+--------------------------------------------+--------------------------------+\n| TINYTEXT                                   |                                |\n+--------------------------------------------+--------------------------------+\n| TO                                         |                                |\n+--------------------------------------------+--------------------------------+\n| TRAILING                                   |                                |\n+--------------------------------------------+--------------------------------+\n| TRIGGER                                    |                                |\n+--------------------------------------------+--------------------------------+\n| TRUE                                       |                                |\n+--------------------------------------------+--------------------------------+\n| UNDO                                       |                                |\n+--------------------------------------------+--------------------------------+\n| UNION                                      |                                |\n+--------------------------------------------+--------------------------------+\n| UNIQUE                                     |                                |\n+--------------------------------------------+--------------------------------+\n| UNLOCK                                     |                                |\n+--------------------------------------------+--------------------------------+\n| UNSIGNED                                   |                                |\n+--------------------------------------------+--------------------------------+\n| UPDATE                                     |                                |\n+--------------------------------------------+--------------------------------+\n| USAGE                                      |                                |\n+--------------------------------------------+--------------------------------+\n| USE                                        |                                |\n+--------------------------------------------+--------------------------------+\n| USING                                      |                                |\n+--------------------------------------------+--------------------------------+\n| UTC_DATE                                   |                                |\n+--------------------------------------------+--------------------------------+\n| UTC_TIME                                   |                                |\n+--------------------------------------------+--------------------------------+\n| UTC_TIMESTAMP                              |                                |\n+--------------------------------------------+--------------------------------+\n| VALUES                                     |                                |\n+--------------------------------------------+--------------------------------+\n| VARBINARY                                  |                                |\n+--------------------------------------------+--------------------------------+\n| VARCHAR                                    |                                |\n+--------------------------------------------+--------------------------------+\n| VARCHARACTER                               |                                |\n+--------------------------------------------+--------------------------------+\n| VARYING                                    |                                |\n+--------------------------------------------+--------------------------------+\n| WHEN                                       |                                |\n+--------------------------------------------+--------------------------------+\n| WHERE                                      |                                |\n+--------------------------------------------+--------------------------------+\n| WHILE                                      |                                |\n+--------------------------------------------+--------------------------------+\n| WINDOW                                     | Only disallowed for table      |\n|                                            | aliases.                       |\n+--------------------------------------------+--------------------------------+\n| WITH                                       |                                |\n+--------------------------------------------+--------------------------------+\n| WRITE                                      |                                |\n+--------------------------------------------+--------------------------------+\n| XOR                                        |                                |\n+--------------------------------------------+--------------------------------+\n| YEAR_MONTH                                 |                                |\n+--------------------------------------------+--------------------------------+\n| ZEROFILL                                   |                                |\n+--------------------------------------------+--------------------------------+\n\nExceptions\n----------\n\nSome keywords are exceptions for historical reasons, and are permitted as\nunquoted identifiers. These include:\n\n+-----------------------------------------------------------------------------+\n| Keyword                                                                     |\n+-----------------------------------------------------------------------------+\n| ACTION                                                                      |\n+-----------------------------------------------------------------------------+\n| BIT                                                                         |\n+-----------------------------------------------------------------------------+\n| DATE                                                                        |\n+-----------------------------------------------------------------------------+\n| ENUM                                                                        |\n+-----------------------------------------------------------------------------+\n| NO                                                                          |\n+-----------------------------------------------------------------------------+\n| TEXT                                                                        |\n+-----------------------------------------------------------------------------+\n| TIME                                                                        |\n+-----------------------------------------------------------------------------+\n| TIMESTAMP                                                                   |\n+-----------------------------------------------------------------------------+\n\nOracle Mode\n-----------\n\nIn Oracle mode, from MariaDB 10.3, there are a number of extra reserved words:\n\n+--------------------------------------------+--------------------------------+\n| Keyword                                    | Notes                          |\n+--------------------------------------------+--------------------------------+\n| BODY                                       |                                |\n+--------------------------------------------+--------------------------------+\n| ELSIF                                      |                                |\n+--------------------------------------------+--------------------------------+\n| GOTO                                       |                                |\n+--------------------------------------------+--------------------------------+\n| HISTORY                                    | <= MariaDB 10.3.6 only         |') WHERE help_topic_id = 479;
update help_topic set description = CONCAT(description, '\n+--------------------------------------------+--------------------------------+\n| MINUS                                      | From MariaDB 10.6.1            |\n+--------------------------------------------+--------------------------------+\n| OTHERS                                     |                                |\n+--------------------------------------------+--------------------------------+\n| PACKAGE                                    |                                |\n+--------------------------------------------+--------------------------------+\n| PERIOD                                     | <= MariaDB 10.3.6 only         |\n+--------------------------------------------+--------------------------------+\n| RAISE                                      |                                |\n+--------------------------------------------+--------------------------------+\n| ROWNUM                                     | From MariaDB 10.6.1            |\n+--------------------------------------------+--------------------------------+\n| ROWTYPE                                    |                                |\n+--------------------------------------------+--------------------------------+\n| SYSDATE                                    | From MariaDB 10.6.1            |\n+--------------------------------------------+--------------------------------+\n| SYSTEM                                     | <= MariaDB 10.3.6 only. Note   |\n|                                            | however that SYSTEM sometimes  |\n|                                            | needs to be quoted to avoid    |\n|                                            | confusion with                 |\n|                                            | System-versioned tables.       |\n+--------------------------------------------+--------------------------------+\n| SYSTEM_TIME                                | <= MariaDB 10.3.6 only         |\n+--------------------------------------------+--------------------------------+\n| VERSIONING                                 | <= MariaDB 10.3.6 only         |\n+--------------------------------------------+--------------------------------+\n| WITHOUT                                    | <= MariaDB 10.3.6 only         |\n+--------------------------------------------+--------------------------------+\n\nFunction Names\n--------------\n\nIf the IGNORE_SPACE SQL_MODE flag is set, function names become reserved words.\n\nURL: https://mariadb.com/kb/en/reserved-words/') WHERE help_topic_id = 479;
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (480,29,'String Literals','Strings are sequences of characters and are enclosed with quotes.\n\nThe syntax is:\n\n[_charset_name]\'string\' [COLLATE collation_name]\n\nFor example:\n\n\'The MariaDB Foundation\'\n_utf8 \'Foundation\' COLLATE utf8_unicode_ci;\n\nStrings can either be enclosed in single quotes or in double quotes (the same\ncharacter must be used to both open and close the string).\n\nThe ANSI SQL-standard does not permit double quotes for enclosing strings, and\nalthough MariaDB does by default, if the MariaDB server has enabled the\nANSI_QUOTES_SQL SQL_MODE, double quotes will be treated as being used for\nidentifiers instead of strings.\n\nStrings that are next to each other are automatically concatenated. For\nexample:\n\n\'The \' \'MariaDB \' \'Foundation\'\n\nand\n\n\'The MariaDB Foundation\'\n\nare equivalent.\n\nThe \\ (backslash character) is used to escape characters (unless the SQL_MODE\nhasn\'t been set to NO_BACKSLASH_ESCAPES). For example:\n\n\'MariaDB\'s new features\'\n\nis not a valid string because of the single quote in the middle of the string,\nwhich is treated as if it closes the string, but is actually meant as part of\nthe string, an apostrophe. The backslash character helps in situations like\nthis:\n\n\'MariaDB\\\'s new features\'\n\nis now a valid string, and if displayed, will appear without the backslash.\n\nSELECT \'MariaDB\\\'s new features\';\n+------------------------+\n| MariaDB\'s new features |\n+------------------------+\n| MariaDB\'s new features |\n+------------------------+\n\nAnother way to escape the quoting character is repeating it twice:\n\nSELECT \'I\'\'m here\', \"\"\"Double\"\"\";\n+----------+----------+\n| I\'m here | \"Double\" |\n+----------+----------+\n| I\'m here | \"Double\" |\n+----------+----------+\n\nEscape Sequences\n----------------\n\nThere are other escape sequences also. Here is a full list:\n\n+-----------------------------------------------+-----------------------------+\n| Escape sequence                               | Character                   |\n+-----------------------------------------------+-----------------------------+\n| \\0                                            | ASCII NUL (0x00).           |\n+-----------------------------------------------+-----------------------------+\n| \\\'                                            | Single quote (\"\'\").         |\n+-----------------------------------------------+-----------------------------+\n| \\\"                                            | Double quote (\"\"\").         |\n+-----------------------------------------------+-----------------------------+\n| \\b                                            | Backspace.                  |\n+-----------------------------------------------+-----------------------------+\n| \\n                                            | Newline, or linefeed,.      |\n+-----------------------------------------------+-----------------------------+\n| \\r                                            | Carriage return.            |\n+-----------------------------------------------+-----------------------------+\n| \\t                                            | Tab.                        |\n+-----------------------------------------------+-----------------------------+\n| \\Z                                            | ASCII 26 (Control+Z). See   |\n|                                               | note following the table.   |\n+-----------------------------------------------+-----------------------------+\n| \\\\                                            | Backslash (\"\\\").            |\n+-----------------------------------------------+-----------------------------+\n| \\%                                            | \"%\" character. See note     |\n|                                               | following the table.        |\n+-----------------------------------------------+-----------------------------+\n| \\_                                            | A \"_\" character. See note   |\n|                                               | following the table.        |\n+-----------------------------------------------+-----------------------------+\n\nEscaping the % and _ characters can be necessary when using the LIKE operator,\nwhich treats them as special characters.\n\nThe ASCII 26 character (\\Z) needs to be escaped when included in a batch file\nwhich needs to be executed in Windows. The reason is that ASCII 26, in\nWindows, is the end of file (EOF).\n\nBackslash (\\), if not used as an escape character, must always be escaped.\nWhen followed by a character that is not in the above table, backslashes will\nsimply be ignored.\n\nURL: https://mariadb.com/kb/en/string-literals/','','https://mariadb.com/kb/en/string-literals/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (481,29,'Table Value Constructors','MariaDB starting with 10.3.3\n----------------------------\nTable Value Constructors were introduced in MariaDB 10.3.3\n\nSyntax\n------\n\nVALUES ( row_value[, row_value...]), (...)...\n\nDescription\n-----------\n\nIn Unions, Views, and sub-queries, a Table Value Constructor (TVC) allows you\nto inject arbitrary values into the result-set. The given values must have the\nsame number of columns as the result-set, otherwise it returns Error 1222.\n\nExamples\n--------\n\nUsing TVC\'s with UNION operations:\n\nCREATE TABLE test.t1 (val1 INT, val2 INT);\nINSERT INTO test.t1 VALUES(5, 8), (3, 4), (1, 2);\n\nSELECT * FROM test.t1\nUNION\nVALUES (70, 90), (100, 110);\n\n+------+------+\n| val1 | val2 |\n+------+------+\n|    5 |    8 | \n|    3 |    4 |\n|    1 |    2 |\n|   70 |   90 |\n|  100 |  110 |\n+------+------+\n\nUsing TVC\'s with a CREATE VIEW statement:\n\nCREATE VIEW v1 AS VALUES (7, 9), (9, 10);\n\nSELECT * FROM v1;\n+---+----+\n| 7 |  9 |\n+---+----+\n| 7 |  9 |\n| 9 | 10 |\n+---+----+\n\nUsing TVC with an ORDER BY clause:\n\nSELECT * FROM test.t1\nUNION\nVALUES (10, 20), (30, 40), (50, 60), (70, 80)\nORDER BY val1 DESC;\n\nUsing TVC with LIMIT clause:\n\nSELECT * FROM test.t1\nUNION\nVALUES (10, 20), (30, 40), (50, 60), (70, 80)\nLIMIT 2 OFFSET 4;\n\n+------+------+\n| val1 | val2 |\n+------+------+\n|   30 |   40 | \n|   50 |   60 |\n+------+------+\n\nURL: https://mariadb.com/kb/en/table-value-constructors/','','https://mariadb.com/kb/en/table-value-constructors/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (482,29,'User-Defined Variables','User-defined variables are variables which can be created by the user and\nexist in the session. This means that no one can access user-defined variables\nthat have been set by another user, and when the session is closed these\nvariables expire. However, these variables can be shared between several\nqueries and stored programs.\n\nUser-defined variables names must be preceded by a single at character (@).\nWhile it is safe to use a reserved word as a user-variable name, the only\nallowed characters are ASCII letters, digits, dollar sign ($), underscore (_)\nand dot (.). If other characters are used, the name can be quoted in one of\nthe following ways:\n\n* @`var_name`\n* @\'var_name\'\n* @\"var_name\"\n\nThese characters can be escaped as usual.\n\nUser-variables names are case insensitive, though they were case sensitive in\nMySQL 4.1 and older versions.\n\nUser-defined variables cannot be declared. They can be read even if no value\nhas been set yet; in that case, they are NULL. To set a value for a\nuser-defined variable you can use:\n\n* SET statement;\n* := operator within a SQL statement;\n* SELECT ... INTO.\n\nSince user-defined variables type cannot be declared, the only way to force\ntheir type is using CAST() or CONVERT():\n\nSET @str = CAST(123 AS CHAR(5));\n\nIf a variable has not been used yet, its value is NULL:\n\nSELECT @x IS NULL;\n+------------+\n| @x IS NULL |\n+------------+\n|          1 |\n+------------+\n\nIt is unsafe to read a user-defined variable and set its value in the same\nstatement (unless the command is SET), because the order of these actions is\nundefined.\n\nUser-defined variables can be used in most MariaDB\'s statements and clauses\nwhich accept an SQL expression. However there are some exceptions, like the\nLIMIT clause.\n\nThey must be used to PREPARE a prepared statement:\n\n@sql = \'DELETE FROM my_table WHERE c>1;\';\nPREPARE stmt FROM @sql;\nEXECUTE stmt;\nDEALLOCATE PREPARE stmt;\n\nAnother common use is to include a counter in a query:\n\nSET @var = 0;\nSELECT a, b, c, (@var:=@var+1) AS counter FROM my_table;\n\nInformation Schema\n------------------\n\nUser-defined variables can be viewed in the Information Schema USER_VARIABLES\nTable (as part of the User Variables plugin) from MariaDB 10.2.\n\nFlushing User-Defined Variables\n-------------------------------\n\nUser-defined variables are reset and the Information Schema table emptied with\nthe FLUSH USER_VARIABLES statement.\n\nSET @str = CAST(123 AS CHAR(5));\n\nSELECT * FROM information_schema.USER_VARIABLES ORDER BY VARIABLE_NAME;\n+---------------+----------------+---------------+--------------------+\n| VARIABLE_NAME | VARIABLE_VALUE | VARIABLE_TYPE | CHARACTER_SET_NAME |\n+---------------+----------------+---------------+--------------------+\n| str           | 123            | VARCHAR       | utf8mb3            |\n+---------------+----------------+---------------+--------------------+\n\nFLUSH USER_VARIABLES;\n\nSELECT * FROM information_schema.USER_VARIABLES ORDER BY VARIABLE_NAME;\nEmpty set (0.000 sec)\n\nURL: https://mariadb.com/kb/en/user-defined-variables/','','https://mariadb.com/kb/en/user-defined-variables/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (483,29,'Delimiters','The default delimiter in the mysql client (from MariaDB 10.4.6, also called\nmariadb) is the semicolon.\n\nWhen creating stored programs from the command-line, it is likely you will\nneed to differentiate between the regular delimiter and a delimiter inside a\nBEGIN END block. To understand better, consider the following example:\n\nCREATE FUNCTION FortyTwo() RETURNS TINYINT DETERMINISTIC\nBEGIN\n DECLARE x TINYINT;\n SET x = 42;\n RETURN x;\nEND;\n\nIf you enter the above line by line, the mysql client will treat the first\nsemicolon, at the end of the DECLARE x TINYINT line, as the end of the\nstatement. Since that\'s only a partial definition, it will throw a syntax\nerror, as follows:\n\nCREATE FUNCTION FortyTwo() RETURNS TINYINT DETERMINISTIC\nBEGIN\nDECLARE x TINYINT;\nERROR 1064 (42000): You have an error in your SQL syntax; \ncheck the manual that corresponds to your MariaDB server version\n for the right syntax to use near \'\' at line 3\n\nThe solution is to specify a distinct delimiter for the duration of the\nprocess, using the DELIMITER command. The delimiter can be any set of\ncharacters you choose, but it needs to be a distinctive set of characters that\nwon\'t cause further confusion. // is a common choice, and used throughout the\nknowledgebase.\n\nHere\'s how the function could be successfully entered from the mysql client\nwith the new delimiter.\n\nDELIMITER //\n\nCREATE FUNCTION FortyTwo() RETURNS TINYINT DETERMINISTIC\nBEGIN\n DECLARE x TINYINT;\n SET x = 42;\n RETURN x;\nEND\n\n//\n\nDELIMITER ;\n\nAt the end, the delimiter is restored to the default semicolon. The \\g and \\G\ndelimiters can always be used, even when a custom delimiter is specified.\n\nURL: https://mariadb.com/kb/en/delimiters/','','https://mariadb.com/kb/en/delimiters/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (484,29,'SQL_MODE=ORACLE','From MariaDB 10.3, setting the sql_mode system variable to Oracle allows the\nserver to understand a subset of Oracle\'s PL/SQL language. For example:\n\nSET SQL_MODE=\'ORACLE\';\n\nAll traditional MariaDB SQL/PSM syntax should work as before, as long as it\ndoes not conflict with Oracle\'s PL/SQL syntax. All MariaDB functions should be\nsupported in both normal and Oracle modes.\n\nPrior to MariaDB 10.3, MariaDB does not support Oracle\'s PL/SQL language, and\nSET SQL_MODE=ORACLE is only an alias for the following sql_mode in those\nversions:\n\nSET SQL_MODE=\'PIPES_AS_CONCAT, ANSI_QUOTES, IGNORE_SPACE, NO_KEY_OPTIONS,\nNO_TABLE_OPTIONS, NO_FIELD_OPTIONS, NO_AUTO_CREATE_USER\';\n\nFrom MariaDB 10.3, SET SQL_MODE=ORACLE is same as:\n\nSET SQL_MODE=\'PIPES_AS_CONCAT,ANSI_QUOTES,IGNORE_SPACE,ORACLE,NO_KEY_OPTIONS,\nNO_TABLE_OPTIONS,NO_FIELD_OPTIONS,NO_AUTO_CREATE_USER,SIMULTANEOUS_ASSIGNMENT\';\n\nSupported Syntax in Oracle Mode\n-------------------------------\n\nStored Procedures and Stored Functions\n--------------------------------------\n\nOracle mode makes the following changes to Stored Procedures and Stored\nFunctions:\n\n+-----------------------------------------+-----------------------------------+\n| Oracle syntax                           | Description                       |\n+-----------------------------------------+-----------------------------------+\n| CREATE PROCEDURE p1 (param OUT INT)     | ANSI uses (OUT param INT)         |\n+-----------------------------------------+-----------------------------------+\n| CREATE PROCEDURE p1 (a IN OUT INT)      | ANSI uses (INOUT param INT)       |\n+-----------------------------------------+-----------------------------------+\n| AS before function body                 | CREATE FUNCTION f1 RETURN NUMBER  |\n|                                         | AS BEGIN...                       |\n+-----------------------------------------+-----------------------------------+\n| IS before function body                 | CREATE FUNCTION f1 RETURN NUMBER  |\n|                                         | IS BEGIN...                       |\n+-----------------------------------------+-----------------------------------+\n| If function has no parameters then      | Example: CREATE PROCEDURE p1 AS   |\n| parentheses must be omitted             | BEGIN NULL; END;                  |\n+-----------------------------------------+-----------------------------------+\n| CREATE PROCEDURE p1 AS BEGIN END p1;    | Optional routine name after END   |\n|                                         | keyword. MDEV-12089               |\n+-----------------------------------------+-----------------------------------+\n| CREATE FUNCTION f1(a VARCHAR)           | VARCHAR can be used without       |\n|                                         | length for routine parameters     |\n|                                         | and RETURN clause. The length is  |\n|                                         | inherited from the argument at    |\n|                                         | call time. MDEV-10596             |\n+-----------------------------------------+-----------------------------------+\n| CREATE AGGREGATE FUNCTION f1( )         | Creates an aggregate function,    |\n|                                         | which performs the function       |\n|                                         | against a set of rows and         |\n|                                         | returns one aggregate result.     |\n+-----------------------------------------+-----------------------------------+\n| No CALL needed in Stored Procedures     | In Oracle mode one can call       |\n|                                         | other stored procedures with      |\n|                                         | name only. MDEV-12107             |\n+-----------------------------------------+-----------------------------------+\n| RETURN. Can also be used in stored      | ANSI uses RETURNS. MariaDB mode   |\n| procedures                              | only supports RETURNS in stored   |\n|                                         | functions                         |\n+-----------------------------------------+-----------------------------------+\n\nCursors\n-------\n\nOracle mode makes the following changes to Cursors:\n\n+-----------------------------------------+-----------------------------------+\n| Oracle syntax                           | Description                       |\n+-----------------------------------------+-----------------------------------+\n| CREATE PROCEDURE p1 AS CURSOR cur IS    | Explicit cursor with FOR loop.    |\n| (SELECT a, b FROM t1); BEGIN  FOR rec   | MDEV-10581                        |\n| IN cur ...                              |                                   |\n+-----------------------------------------+-----------------------------------+\n| CREATE PROCEDURE p1 AS rec IN (SELECT   | Implicit cursor with FOR loop.    |\n| a, b FROM t1)                           | MDEV-12098                        |\n+-----------------------------------------+-----------------------------------+\n| CURSOR c(prm_a VARCHAR2, prm_b          | Cursor with parameters.           |\n| VARCHAR2) ... OPEN c(1,2)               | MDEV-10597                        |\n+-----------------------------------------+-----------------------------------+\n| CURSOR c(prm_a VARCHAR2, prm_b          | Cursor with parameters and FOR    |\n| VARCHAR2) ... FOR rec in c(1,2)         | loop. MDEV-12314                  |\n+-----------------------------------------+-----------------------------------+\n| s %ISOPEN, %ROWCOUNT, %FOUND, %NOTFOUND | Explicit cursor attributes.       |\n|                                         | MDEV-10582                        |\n+-----------------------------------------+-----------------------------------+\n\nLOOP\n----\n\nOracle mode makes the following changes to LOOP:\n\n+-----------------------------------------+-----------------------------------+\n| Oracle syntax                           | Description                       |\n+-----------------------------------------+-----------------------------------+\n| FOR i IN 1..10 LOOP ... END LOOP        | Numeric FOR loop. MDEV-10580      |\n+-----------------------------------------+-----------------------------------+\n| GOTO                                    | GOTO statement.  MDEV-10697       |\n+-----------------------------------------+-----------------------------------+\n| <<label>> used with GOTO                | ANSI uses label:. MDEV-10697      |\n+-----------------------------------------+-----------------------------------+\n| To leave loop block: EXIT [ label ] [   | ANSI syntax is IF bool_expr THEN  |\n| WHEN bool_expr ]                        | LEAVE label                       |\n+-----------------------------------------+-----------------------------------+\n| [<<label>>] WHILE boolean_expression    | Oracle style WHILE loop           |\n| LOOP statement... END LOOP [ label ] ;  |                                   |\n+-----------------------------------------+-----------------------------------+\n| CONTINUE [ label ] [ WHEN               | CONTINUE is only valid inside a   |\n| boolean_expression]                     | loop                              |\n+-----------------------------------------+-----------------------------------+\n\nVariables\n---------\n\n+------------------------------+-----------------+--------------------------+\n| Oracle syntax                | Version         | Description              |\n+------------------------------+-----------------+--------------------------+\n| var:= 10; Can also be used   | 10.3            | MariaDB uses SET var=    |\n| with MariaDB systemvariables |                 | 10;                      |\n+------------------------------+-----------------+--------------------------+\n| var INT := 10                | 10.3            | Default variable value   |\n+------------------------------+-----------------+--------------------------+\n| var1                         | 10.3            | Take data type from a    |\n| table_name.column_name%TYPE  |                 | table column. MDEV-10577 |\n+------------------------------+-----------------+--------------------------+\n| var2 var1%TYPE               | 10.3            | Take data type from      |\n|                              |                 | another variable         |\n+------------------------------+-----------------+--------------------------+\n| rec1 table_name%ROWTYPE      | 10.3            | Take ROW structure from  |\n|                              |                 | a table. MDEV-12133      |\n+------------------------------+-----------------+--------------------------+\n| rec2 rec1%ROWTYPE            | 10.3            | Take ROW structure from  |\n|                              |                 | ROW variable             |\n+------------------------------+-----------------+--------------------------+\n| CURSOR c1 IS SELECT a,b      | 10.3            | Take ROW structure from  |\n| FROM t1; rec1 c1%ROWTYPE;    |                 | a cursor. MDEV-12011     |\n+------------------------------+-----------------+--------------------------+\n| Variables can be declared    | 10.3            | In MariaDB mode,         |\n| after cursor declarations    |                 | variables must be        |\n|                              |                 | declared before          |\n|                              |                 | cursors. MDEV-10598      |\n+------------------------------+-----------------+--------------------------+\n| Triggers uses :NEW and :OLD  | 10.3            | ANSI uses NEW and OLD.   |\n|                              |                 | MDEV-10579               |\n+------------------------------+-----------------+--------------------------+\n| SQLCODE                      | 10.3            | Returns the number code  |\n|                              |                 | of the most recent       |\n|                              |                 | exception. Can only be   |\n|                              |                 | used in Stored           |\n|                              |                 | Procedures. MDEV-10578   |\n+------------------------------+-----------------+--------------------------+\n| SQLERRM                      | 10.3            | Returns the error        |\n|                              |                 | message associdated to   |\n|                              |                 | it\'s error number        |\n|                              |                 | argument or SQLCODE if   |\n|                              |                 | no argument is given.    |\n|                              |                 | Can only be used in      |\n|                              |                 | Stored Procedures.       |\n|                              |                 | MDEV-10578               |\n+------------------------------+-----------------+--------------------------+\n| SQL%ROWCOUNT                 | 10.3            | Almost same as           |\n|                              |                 | ROW_COUNT(). MDEV-10583  |\n+------------------------------+-----------------+--------------------------+\n| ROWNUM                       | 10.6.1          | Returns number of        |\n|                              |                 | accepted rows            |\n+------------------------------+-----------------+--------------------------+\n\nExceptions\n----------\n\n+-----------------------------------------+-----------------------------------+\n| Oracle syntax                           | Description                       |\n+-----------------------------------------+-----------------------------------+\n| BEGIN ... EXCEPTION WHEN OTHERS THEN    | Exception handlers are declared   |\n| BEGIN ..  END; END;                     | at the end of a block             |\n+-----------------------------------------+-----------------------------------+\n| TOO_MANY_ROWS, NO_DATA_FOUND,           | Predefined exceptions. MDEV-10839 |\n| DUP_VAL_ON_INDEX                        |                                   |\n+-----------------------------------------+-----------------------------------+\n| RAISE TOO_MANY_ROWS ; .... EXCEPTION    | Exception can be used with RAISE  |\n| WHEN TOO_MANY_ROWS THEN ...             | and EXCEPTION...WHEN. MDEV-10840  |\n+-----------------------------------------+-----------------------------------+\n| CREATE OR REPLACE FUNCTION f1 (a INT)   | User defined exceptions.          |\n| RETURN INT AS e1 EXCEPTION...           | MDEV-10587                        |\n+-----------------------------------------+-----------------------------------+\n\nBEGIN Blocks\n------------\n\n+-----------------------------------------+-----------------------------------+\n| Oracle syntax                           | Description                       |\n+-----------------------------------------+-----------------------------------+\n| BEGIN to start a block                  | MariaDB uses BEGIN NOT ATOMIC     |\n|                                         | for anyonymous blocks. MDEV-10655 |\n+-----------------------------------------+-----------------------------------+\n| DECLARE is used before BEGIN            | DECLARE a INT; b VARCHAR(10);     |\n|                                         | BEGIN v:= 10; END;                |\n+-----------------------------------------+-----------------------------------+\n| WHEN DUP_VAL_ON_INDEX THEN NULL ;       | Do not require BEGIN..END in      |\n| NULL; WHEN OTHERS THEN NULL             | multi-statement exception         |\n|                                         | handlers in THEN clause.          |\n|                                         | MDEV-12088                        |\n+-----------------------------------------+-----------------------------------+\n\nSimple Syntax Compatibility\n---------------------------\n\n+------------------------------+-----------------+--------------------------+\n| Oracle syntax                | Version         | Description              |\n+------------------------------+-----------------+--------------------------+\n| ELSIF                        | 10.3            | ANSI uses ELSEIF         |\n+------------------------------+-----------------+--------------------------+\n| SELECT UNIQUE                | 10.3            | Same as SELECT           |\n|                              |                 | DISTINCT. MDEV-12086     |','','https://mariadb.com/kb/en/sql_modeoracle/');
update help_topic set description = CONCAT(description, '\n+------------------------------+-----------------+--------------------------+\n| TRUNCATE TABLE t1 [DROP      | 10.3            | DROP STORAGE and REUSE   |\n| STORAGE] or [REUSE STORAGE]  |                 | STORAGE are allowed as   |\n|                              |                 | optional keywords for    |\n|                              |                 | TRUNCATE TABLE.          |\n|                              |                 | MDEV-10588               |\n+------------------------------+-----------------+--------------------------+\n| Subqueries in a FROM clause  | 10.6            | SELECT * FROM (SELECT 1  |\n| without an alias             |                 | FROM DUAL), (SELECT 2    |\n|                              |                 | FROM DUAL)               |\n+------------------------------+-----------------+--------------------------+\n| UNION, EXCEPT and INTERSECT  | 10.3            | INTERSECT has higher     |\n| all have the same            |                 | precedence than UNION    |\n| precedence.                  |                 | and EXCEPT in            |\n|                              |                 | non-Oracle modes.        |\n+------------------------------+-----------------+--------------------------+\n| MINUS                        | 10.6            | MINUS is a synonym for   |\n|                              |                 | EXCEPT.                  |\n+------------------------------+-----------------+--------------------------+\n\nFunctions\n---------\n\n+------------------------------+-----------------+--------------------------+\n| Oracle syntax                | Version         | Description              |\n+------------------------------+-----------------+--------------------------+\n| ADD_MONTHS()                 | 10.6.1          | Added as a wrapper for   |\n|                              |                 | DATE_ADD() to enhance    |\n|                              |                 | Oracle compatibility.    |\n|                              |                 | All modes.               |\n+------------------------------+-----------------+--------------------------+\n| CAST(expr as VARCHAR(N))     | 10.3            | Cast expression to a     |\n|                              |                 | VARCHAR(N). MDEV-11275   |\n+------------------------------+-----------------+--------------------------+\n| DECODE                       | 10.3            | In Oracle mode,          |\n|                              |                 | compares and matches     |\n|                              |                 | search expressions       |\n+------------------------------+-----------------+--------------------------+\n| LENGTH() is same as          | 10.3            | MariaDB translates       |\n| CHAR_LENGTH()                |                 | LENGTH() to              |\n|                              |                 | OCTET_LENGTH(). In all   |\n|                              |                 | modes one can use        |\n|                              |                 | LENGTHB() as a synonym   |\n|                              |                 | to OCTET_LENGTH()        |\n+------------------------------+-----------------+--------------------------+\n| CHR(num)                     | 10.3            | Returns a VARCHAR(1)     |\n|                              |                 | with character set and   |\n|                              |                 | collation according to   |\n|                              |                 | @@character_set_database |\n|                              |                 | and @@collation_database |\n+------------------------------+-----------------+--------------------------+\n| substr(\'abc\',0 ,3) same as   | 10.3            | Position 0 for substr()  |\n| substr(\'abc\', 1 ,3)          |                 | is same as position 1    |\n+------------------------------+-----------------+--------------------------+\n| SYS_GUID                     | 10.6.1          | Generates a globally     |\n|                              |                 | unique identifier.       |\n|                              |                 | Similar to UUID but      |\n|                              |                 | without the -. All       |\n|                              |                 | modes.                   |\n+------------------------------+-----------------+--------------------------+\n| TO_CHAR                      | 10.6.1          | Added to enhance Oracle  |\n|                              |                 | compatibility. All       |\n|                              |                 | modes.                   |\n+------------------------------+-----------------+--------------------------+\n| TRIM, LTRIM, RTRIM, LPAD     | 10.3            | Returns NULL instead of  |\n| and RPAD                     |                 | an empty string if       |\n|                              |                 | returning an empty       |\n|                              |                 | result. These functions  |\n|                              |                 | can also be accessed     |\n|                              |                 | outside of ORACLE mode   |\n|                              |                 | by suffixing _ORACLE     |\n|                              |                 | onto the end of the      |\n|                              |                 | function name, such as   |\n|                              |                 | TRIM_ORACLE.             |\n+------------------------------+-----------------+--------------------------+\n\nPrepared Statements\n-------------------\n\nOracle mode makes the following changes to Prepared Statements:\n\n+-----------------------------------------+-----------------------------------+\n| Oracle syntax                           | Description                       |\n+-----------------------------------------+-----------------------------------+\n| PREPARE stmt FROM \'SELECT :1, :2\'       | ANSI uses ?. MDEV-10801           |\n+-----------------------------------------+-----------------------------------+\n| EXECUTE IMMEDIATE \'INSERT INTO t1       | Dynamic placeholders. MDEV-10801  |\n| SELECT (:x,:y) FROM DUAL\' USING 10,20   |                                   |\n+-----------------------------------------+-----------------------------------+\n\nSynonyms for Basic SQL Types\n----------------------------\n\n+--------------------------------+-------------------------------------------+\n| Oracle type                    | MariaDB synonym                           |\n+--------------------------------+-------------------------------------------+\n| VARCHAR2                       | VARCHAR                                   |\n+--------------------------------+-------------------------------------------+\n| NUMBER                         | DECIMAL                                   |\n+--------------------------------+-------------------------------------------+\n| DATE (with time portion)       | MariaDB DATETIME                          |\n+--------------------------------+-------------------------------------------+\n| RAW                            | VARBINARY                                 |\n+--------------------------------+-------------------------------------------+\n| CLOB                           | LONGTEXT                                  |\n+--------------------------------+-------------------------------------------+\n| BLOB                           | LONGBLOB                                  |\n+--------------------------------+-------------------------------------------+\n\nThis was implemented as part of MDEV-10343.\n\nIf one does a SHOW CREATE TABLE in ORACLE mode on a table that has a native\nMariaDB DATE column, it will be displayed as mariadb_schema.date to not\nconflict with the Oracle DATE type.\n\nPackages\n--------\n\nThe following syntax has been supported since MariaDB 10.3.5:\n\n* CREATE PACKAGE\n* CREATE PACKAGE BODY\n* DROP PACKAGE\n* DROP PACKAGE BODY\n* SHOW CREATE PACKAGE\n* SHOW CREATE PACKAGE BODY\n\nNULL Handling\n-------------\n\nOracle mode makes the following changes to NULL handling:\n\nNULL As a Statement\n-------------------\n\nNULL can be used as a statement:\n\nIF a=10 THEN NULL; ELSE NULL; END IF\n\nTranslating Empty String Literals to NULL\n-----------------------------------------\n\nIn Oracle, empty string (\'\') and NULL are the same thing,\n\nBy using sql_mode=EMPTY_STRING_IS_NULL you can get a similar experience in\nMariaDB:\n\nSET sql_mode=EMPTY_STRING_IS_NULL;\nSELECT \'\' IS NULL; -- returns TRUE\nINSERT INTO t1 VALUES (\'\'); -- inserts NULL\n\nConcat Operator Ignores NULL\n----------------------------\n\nCONCAT() and || ignore NULL in Oracle mode. Can also be accessed outside of\nORACLE mode by using CONCAT_OPERATOR_ORACLE. MDEV-11880 and MDEV-12143.\n\nReserved Words\n--------------\n\nThere are a number of extra reserved words in Oracle mode.\n\nSHOW CREATE TABLE\n-----------------\n\nThe SHOW CREATE TABLE statement will not display MariaDB-specific table\noptions, such as AUTO_INCREMENT or CHARSET, when Oracle mode is set.\n\nURL: https://mariadb.com/kb/en/sql_modeoracle/') WHERE help_topic_id = 484;
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (485,30,'CONTAINS','Syntax\n------\n\nContains(g1,g2)\n\nDescription\n-----------\n\nReturns 1 or 0 to indicate whether a geometry g1 completely contains geometry\ng2. CONTAINS() is based on the original MySQL implementation and uses object\nbounding rectangles, while ST_CONTAINS() uses object shapes.\n\nThis tests the opposite relationship to Within().\n\nURL: https://mariadb.com/kb/en/contains/','','https://mariadb.com/kb/en/contains/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (486,30,'CROSSES','Syntax\n------\n\nCrosses(g1,g2)\n\nDescription\n-----------\n\nReturns 1 if g1 spatially crosses g2. Returns NULL if g1 is a Polygon or a\nMultiPolygon, or if g2 is a Point or a MultiPoint. Otherwise, returns 0.\n\nThe term spatially crosses denotes a spatial relation between two given\ngeometries that has the following properties:\n\n* The two geometries intersect\n* Their intersection results in a geometry that has a dimension that is one\n less than the maximum dimension of the two given geometries\n* Their intersection is not equal to either of the two given geometries\n\nCROSSES() is based on the original MySQL implementation, and uses object\nbounding rectangles, while ST_CROSSES() uses object shapes.\n\nURL: https://mariadb.com/kb/en/crosses/','','https://mariadb.com/kb/en/crosses/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (487,30,'DISJOINT','Syntax\n------\n\nDisjoint(g1,g2)\n\nDescription\n-----------\n\nReturns 1 or 0 to indicate whether g1 is spatially disjoint from (does not\nintersect) g2.\n\nDISJOINT() tests the opposite relationship to INTERSECTS().\n\nDISJOINT() is based on the original MySQL implementation and uses object\nbounding rectangles, while ST_DISJOINT() uses object shapes.\n\nURL: https://mariadb.com/kb/en/disjoint/','','https://mariadb.com/kb/en/disjoint/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (488,30,'EQUALS','Syntax\n------\n\nEquals(g1,g2)\n\nFrom MariaDB 10.2.3:\n\nMBREQUALS(g1,g2)\n\nDescription\n-----------\n\nReturns 1 or 0 to indicate whether g1 is spatially equal to g2.\n\nEQUALS() is based on the original MySQL implementation and uses object\nbounding rectangles, while ST_EQUALS() uses object shapes.\n\nFrom MariaDB 10.2.3, MBREQUALS is a synonym for Equals.\n\nURL: https://mariadb.com/kb/en/equals/','','https://mariadb.com/kb/en/equals/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (489,30,'INTERSECTS','Syntax\n------\n\nINTERSECTS(g1,g2)\n\nDescription\n-----------\n\nReturns 1 or 0 to indicate whether geometry g1 spatially intersects geometry\ng2.\n\nINTERSECTS() is based on the original MySQL implementation and uses object\nbounding rectangles, while ST_INTERSECTS() uses object shapes.\n\nINTERSECTS() tests the opposite relationship to DISJOINT().\n\nURL: https://mariadb.com/kb/en/intersects/','','https://mariadb.com/kb/en/intersects/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (490,30,'OVERLAPS','Syntax\n------\n\nOVERLAPS(g1,g2)\n\nDescription\n-----------\n\nReturns 1 or 0 to indicate whether g1 spatially overlaps g2. The term\nspatially overlaps is used if two geometries intersect and their intersection\nresults in a geometry of the same dimension but not equal to either of the\ngiven geometries.\n\nOVERLAPS() is based on the original MySQL implementation and uses object\nbounding rectangles, while ST_OVERLAPS() uses object shapes.\n\nURL: https://mariadb.com/kb/en/overlaps/','','https://mariadb.com/kb/en/overlaps/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (491,30,'ST_CONTAINS','Syntax\n------\n\nST_CONTAINS(g1,g2)\n\nDescription\n-----------\n\nReturns 1 or 0 to indicate whether a geometry g1 completely contains geometry\ng2.\n\nST_CONTAINS() uses object shapes, while CONTAINS(), based on the original\nMySQL implementation, uses object bounding rectangles.\n\nST_CONTAINS tests the opposite relationship to ST_WITHIN().\n\nExamples\n--------\n\nSET @g1 = ST_GEOMFROMTEXT(\'POLYGON((175 150, 20 40, 50 60, 125 100, 175\n150))\');\n\nSET @g2 = ST_GEOMFROMTEXT(\'POINT(174 149)\');\n\nSELECT ST_CONTAINS(@g1,@g2);\n+----------------------+\n| ST_CONTAINS(@g1,@g2) |\n+----------------------+\n|                    1 |\n+----------------------+\n\nSET @g2 = ST_GEOMFROMTEXT(\'POINT(175 151)\');\n\nSELECT ST_CONTAINS(@g1,@g2);\n+----------------------+\n| ST_CONTAINS(@g1,@g2) |\n+----------------------+\n|                    0 |\n+----------------------+\n\nURL: https://mariadb.com/kb/en/st-contains/','','https://mariadb.com/kb/en/st-contains/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (492,30,'ST_CROSSES','Syntax\n------\n\nST_CROSSES(g1,g2)\n\nDescription\n-----------\n\nReturns 1 if geometry g1 spatially crosses geometry g2. Returns NULL if g1 is\na Polygon or a MultiPolygon, or if g2 is a Point or a MultiPoint. Otherwise,\nreturns 0.\n\nThe term spatially crosses denotes a spatial relation between two given\ngeometries that has the following properties:\n\n* The two geometries intersect\n* Their intersection results in a geometry that has a dimension that is one\n less than the maximum dimension of the two given geometries\n* Their intersection is not equal to either of the two given geometries\n\nST_CROSSES() uses object shapes, while CROSSES(), based on the original MySQL\nimplementation, uses object bounding rectangles.\n\nExamples\n--------\n\nSET @g1 = ST_GEOMFROMTEXT(\'LINESTRING(174 149, 176 151)\');\n\nSET @g2 = ST_GEOMFROMTEXT(\'POLYGON((175 150, 20 40, 50 60, 125 100, 175\n150))\');\n\nSELECT ST_CROSSES(@g1,@g2);\n+---------------------+\n| ST_CROSSES(@g1,@g2) |\n+---------------------+\n|                   1 |\n+---------------------+\n\nSET @g1 = ST_GEOMFROMTEXT(\'LINESTRING(176 149, 176 151)\');\n\nSELECT ST_CROSSES(@g1,@g2);\n+---------------------+\n| ST_CROSSES(@g1,@g2) |\n+---------------------+\n|                   0 |\n+---------------------+\n\nURL: https://mariadb.com/kb/en/st-crosses/','','https://mariadb.com/kb/en/st-crosses/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (493,30,'ST_DIFFERENCE','Syntax\n------\n\nST_DIFFERENCE(g1,g2)\n\nDescription\n-----------\n\nReturns a geometry representing the point set difference of the given geometry\nvalues.\n\nExample\n-------\n\nSET @g1 = POINT(10,10), @g2 = POINT(20,20);\n\nSELECT ST_AsText(ST_Difference(@g1, @g2));\n+------------------------------------+\n| ST_AsText(ST_Difference(@g1, @g2)) |\n+------------------------------------+\n| POINT(10 10)                       |\n+------------------------------------+\n\nURL: https://mariadb.com/kb/en/st_difference/','','https://mariadb.com/kb/en/st_difference/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (494,30,'ST_DISJOINT','Syntax\n------\n\nST_DISJOINT(g1,g2)\n\nDescription\n-----------\n\nReturns 1 or 0 to indicate whether geometry g1 is spatially disjoint from\n(does not intersect with) geometry g2.\n\nST_DISJOINT() uses object shapes, while DISJOINT(), based on the original\nMySQL implementation, uses object bounding rectangles.\n\nST_DISJOINT() tests the opposite relationship to ST_INTERSECTS().\n\nExamples\n--------\n\nSET @g1 = ST_GEOMFROMTEXT(\'POINT(0 0)\');\n\nSET @g2 = ST_GEOMFROMTEXT(\'LINESTRING(2 0, 0 2)\');\n\nSELECT ST_DISJOINT(@g1,@g2);\n+----------------------+\n| ST_DISJOINT(@g1,@g2) |\n+----------------------+\n|                    1 |\n+----------------------+\n\nSET @g2 = ST_GEOMFROMTEXT(\'LINESTRING(0 0, 0 2)\');\n\nSELECT ST_DISJOINT(@g1,@g2);\n+----------------------+\n| ST_DISJOINT(@g1,@g2) |\n+----------------------+\n|                    0 |\n+----------------------+\n\nURL: https://mariadb.com/kb/en/st_disjoint/','','https://mariadb.com/kb/en/st_disjoint/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (495,30,'ST_DISTANCE','Syntax\n------\n\nST_DISTANCE(g1,g2)\n\nDescription\n-----------\n\nReturns the distance between two geometries, or null if not given valid inputs.\n\nExample\n-------\n\nSELECT ST_Distance(POINT(1,2),POINT(2,2));\n+------------------------------------+\n| ST_Distance(POINT(1,2),POINT(2,2)) |\n+------------------------------------+\n|                                  1 |\n+------------------------------------+\n\nURL: https://mariadb.com/kb/en/st_distance/','','https://mariadb.com/kb/en/st_distance/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (496,30,'ST_DISTANCE_SPHERE','MariaDB starting with 10.2.38\n-----------------------------\nST_DISTANCE_SPHERE was introduced in MariaDB 10.2.38, MariaDB 10.3.29, MariaDB\n10.4.19 and MariaDB 10.5.10.\n\nSyntax\n------\n\nST_DISTANCE_SPHERE(g1,g2,[r])\n\nDescription\n-----------\n\nReturns the spherical distance between two geometries (point or multipoint) on\na sphere with the optional radius r (default is the Earth radius if r is not\nspecified), or NULL if not given valid inputs.\n\nExample\n-------\n\nset @zenica   = ST_GeomFromText(\'POINT(17.907743 44.203438)\');\nset @sarajevo = ST_GeomFromText(\'POINT(18.413076 43.856258)\');\nSELECT ST_Distance_Sphere(@zenica, @sarajevo);\n55878.59337591705\n\nURL: https://mariadb.com/kb/en/st_distance_sphere/','','https://mariadb.com/kb/en/st_distance_sphere/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (497,30,'ST_EQUALS','Syntax\n------\n\nST_EQUALS(g1,g2)\n\nDescription\n-----------\n\nReturns 1 or 0 to indicate whether geometry g1 is spatially equal to geometry\ng2.\n\nST_EQUALS() uses object shapes, while EQUALS(), based on the original MySQL\nimplementation, uses object bounding rectangles.\n\nExamples\n--------\n\nSET @g1 = ST_GEOMFROMTEXT(\'LINESTRING(174 149, 176 151)\');\n\nSET @g2 = ST_GEOMFROMTEXT(\'LINESTRING(176 151, 174 149)\');\n\nSELECT ST_EQUALS(@g1,@g2);\n+--------------------+\n| ST_EQUALS(@g1,@g2) |\n+--------------------+\n|                  1 |\n+--------------------+\n\nSET @g1 = ST_GEOMFROMTEXT(\'POINT(0 2)\');\n\nSET @g1 = ST_GEOMFROMTEXT(\'POINT(2 0)\');\n\nSELECT ST_EQUALS(@g1,@g2);\n+--------------------+\n| ST_EQUALS(@g1,@g2) |\n+--------------------+\n|                  0 |\n+--------------------+\n\nURL: https://mariadb.com/kb/en/st-equals/','','https://mariadb.com/kb/en/st-equals/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (498,30,'ST_INTERSECTS','Syntax\n------\n\nST_INTERSECTS(g1,g2)\n\nDescription\n-----------\n\nReturns 1 or 0 to indicate whether geometry g1 spatially intersects geometry\ng2.\n\nST_INTERSECTS() uses object shapes, while INTERSECTS(), based on the original\nMySQL implementation, uses object bounding rectangles.\n\nST_INTERSECTS() tests the opposite relationship to ST_DISJOINT().\n\nExamples\n--------\n\nSET @g1 = ST_GEOMFROMTEXT(\'POINT(0 0)\');\n\nSET @g2 = ST_GEOMFROMTEXT(\'LINESTRING(0 0, 0 2)\');\n\nSELECT ST_INTERSECTS(@g1,@g2);\n+------------------------+\n| ST_INTERSECTS(@g1,@g2) |\n+------------------------+\n|                      1 |\n+------------------------+\n\nSET @g2 = ST_GEOMFROMTEXT(\'LINESTRING(2 0, 0 2)\');\n\nSELECT ST_INTERSECTS(@g1,@g2);\n+------------------------+\n| ST_INTERSECTS(@g1,@g2) |\n+------------------------+\n|                      0 |\n+------------------------+\n\nURL: https://mariadb.com/kb/en/st-intersects/','','https://mariadb.com/kb/en/st-intersects/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (499,30,'ST_LENGTH','Syntax\n------\n\nST_LENGTH(ls)\n\nDescription\n-----------\n\nReturns as a double-precision number the length of the LineString value ls in\nits associated spatial reference.\n\nExamples\n--------\n\nSET @ls = \'LineString(1 1,2 2,3 3)\';\n\nSELECT ST_LENGTH(ST_GeomFromText(@ls));\n+---------------------------------+\n| ST_LENGTH(ST_GeomFromText(@ls)) |\n+---------------------------------+\n|                2.82842712474619 |\n+---------------------------------+\n\nURL: https://mariadb.com/kb/en/st_length/','','https://mariadb.com/kb/en/st_length/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (500,30,'ST_OVERLAPS','Syntax\n------\n\nST_OVERLAPS(g1,g2)\n\nDescription\n-----------\n\nReturns 1 or 0 to indicate whether geometry g1 spatially overlaps geometry g2.\n\nThe term spatially overlaps is used if two geometries intersect and their\nintersection results in a geometry of the same dimension but not equal to\neither of the given geometries.\n\nST_OVERLAPS() uses object shapes, while OVERLAPS(), based on the original\nMySQL implementation, uses object bounding rectangles.\n\nURL: https://mariadb.com/kb/en/st-overlaps/','','https://mariadb.com/kb/en/st-overlaps/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (501,30,'ST_TOUCHES','Syntax\n------\n\nST_TOUCHES(g1,g2)\n\nDescription\n-----------\n\nReturns 1 or 0 to indicate whether geometry g1 spatially touches geometry g2.\nTwo geometries spatially touch if the interiors of the geometries do not\nintersect, but the boundary of one of the geometries intersects either the\nboundary or the interior of the other.\n\nST_TOUCHES() uses object shapes, while TOUCHES(), based on the original MySQL\nimplementation, uses object bounding rectangles.\n\nExamples\n--------\n\nSET @g1 = ST_GEOMFROMTEXT(\'POINT(2 0)\');\n\nSET @g2 = ST_GEOMFROMTEXT(\'LINESTRING(2 0, 0 2)\');\n\nSELECT ST_TOUCHES(@g1,@g2);\n+---------------------+\n| ST_TOUCHES(@g1,@g2) |\n+---------------------+\n|                   1 |\n+---------------------+\n\nSET @g1 = ST_GEOMFROMTEXT(\'POINT(2 1)\');\n\nSELECT ST_TOUCHES(@g1,@g2);\n+---------------------+\n| ST_TOUCHES(@g1,@g2) |\n+---------------------+\n|                   0 |\n+---------------------+\n\nURL: https://mariadb.com/kb/en/st-touches/','','https://mariadb.com/kb/en/st-touches/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (502,30,'ST_WITHIN','Syntax\n------\n\nST_WITHIN(g1,g2)\n\nDescription\n-----------\n\nReturns 1 or 0 to indicate whether geometry g1 is spatially within geometry g2.\n\nThis tests the opposite relationship as ST_CONTAINS().\n\nST_WITHIN() uses object shapes, while WITHIN(), based on the original MySQL\nimplementation, uses object bounding rectangles.\n\nExamples\n--------\n\nSET @g1 = ST_GEOMFROMTEXT(\'POINT(174 149)\');\n\nSET @g2 = ST_GEOMFROMTEXT(\'POLYGON((175 150, 20 40, 50 60, 125 100, 175\n150))\');\n\nSELECT ST_WITHIN(@g1,@g2);\n+--------------------+\n| ST_WITHIN(@g1,@g2) |\n+--------------------+\n|                  1 |\n+--------------------+\n\nSET @g1 = ST_GEOMFROMTEXT(\'POINT(176 151)\');\n\nSELECT ST_WITHIN(@g1,@g2);\n+--------------------+\n| ST_WITHIN(@g1,@g2) |\n+--------------------+\n|                  0 |\n+--------------------+\n\nURL: https://mariadb.com/kb/en/st-within/','','https://mariadb.com/kb/en/st-within/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (503,30,'TOUCHES','Syntax\n------\n\nTouches(g1,g2)\n\nDescription\n-----------\n\nReturns 1 or 0 to indicate whether g1 spatially touches g2. Two geometries\nspatially touch if the interiors of the geometries do not intersect, but the\nboundary of one of the geometries intersects either the boundary or the\ninterior of the other.\n\nTOUCHES() is based on the original MySQL implementation and uses object\nbounding rectangles, while ST_TOUCHES() uses object shapes.\n\nURL: https://mariadb.com/kb/en/touches/','','https://mariadb.com/kb/en/touches/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (504,30,'WITHIN','Syntax\n------\n\nWithin(g1,g2)\n\nDescription\n-----------\n\nReturns 1 or 0 to indicate whether g1 is spatially within g2. This tests the\nopposite relationship as Contains().\n\nWITHIN() is based on the original MySQL implementation, and uses object\nbounding rectangles, while ST_WITHIN() uses object shapes.\n\nExamples\n--------\n\nSET @g1 = GEOMFROMTEXT(\'POINT(174 149)\');\nSET @g2 = GEOMFROMTEXT(\'POINT(176 151)\');\nSET @g3 = GEOMFROMTEXT(\'POLYGON((175 150, 20 40, 50 60, 125 100, 175 150))\');\n\nSELECT within(@g1,@g3);\n+-----------------+\n| within(@g1,@g3) |\n+-----------------+\n|               1 |\n+-----------------+\n\nSELECT within(@g2,@g3);\n+-----------------+\n| within(@g2,@g3) |\n+-----------------+\n|               0 |\n+-----------------+\n\nURL: https://mariadb.com/kb/en/within/','','https://mariadb.com/kb/en/within/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (505,31,'Microseconds in MariaDB','The TIME, DATETIME, and TIMESTAMP types, along with the temporal functions,\nCAST and dynamic columns, support microseconds. The datetime precision of a\ncolumn can be specified when creating the table with CREATE TABLE, for example:\n\nCREATE TABLE example(\n col_microsec DATETIME(6),\n col_millisec TIME(3)\n);\n\nGenerally, the precision can be specified for any TIME, DATETIME, or TIMESTAMP\ncolumn, in parentheses, after the type name. The datetime precision specifies\nnumber of digits after the decimal dot and can be any integer number from 0 to\n6. If no precision is specified it is assumed to be 0, for backward\ncompatibility reasons.\n\nA datetime precision can be specified wherever a type name is used. For\nexample:\n\n* when declaring arguments of stored routines.\n* when specifying a return type of a stored function.\n* when declaring variables.\n* in a CAST function:create function example(x datetime(5)) returns time(4)\nbegin\n declare y timestamp(6);\n return cast(x as time(2));\nend;\n\n%f is used as the formatting option for microseconds in the STR_TO_DATE,\nDATE_FORMAT and FROM_UNIXTIME functions, for example:\n\nSELECT STR_TO_DATE(\'20200809 020917076\',\'%Y%m%d %H%i%s%f\');\n+-----------------------------------------------------+\n| STR_TO_DATE(\'20200809 020917076\',\'%Y%m%d %H%i%s%f\') |\n+-----------------------------------------------------+\n| 2020-08-09 02:09:17.076000                          |\n+-----------------------------------------------------+\n\nAdditional Information\n----------------------\n\n* when comparing anything to a temporal value (DATETIME, TIME, DATE, or\nTIMESTAMP), both values are compared as temporal values, not as strings.\n* The INFORMATION_SCHEMA.COLUMNS table has a new column DATETIME_PRECISION\n* NOW(), CURTIME(), UTC_TIMESTAMP(), UTC_TIME(), CURRENT_TIME(),\nCURRENT_TIMESTAMP(), LOCALTIME() and LOCALTIMESTAMP() now accept datetime\nprecision as an optional argument. For example:SELECT CURTIME(4);\n--> 10:11:12.3456\n\n* TIME_TO_SEC() and UNIX_TIMESTAMP() preserve microseconds of the argument.\nThese functions will return a decimal number if the result non-zero datetime\nprecision and an integer otherwise (for backward compatibility).SELECT\nTIME_TO_SEC(\'10:10:10.12345\');\n--> 36610.12345\n\n* Current versions of this patch fix a bug in the following optimization: in\n certain queries with DISTINCT MariaDB can ignore this clause if it can\n prove that all result rows are unique anyway, for example, when a primary key\n is compared with a constant. Sometimes this optimization was applied\n incorrectly, though — for example, when comparing a\n string with a date constant. This is now fixed.\n* DATE_ADD() and DATE_SUB() functions can now take a TIME\n expression as an argument (not just DATETIME as before).SELECT\nTIME(\'10:10:10\') + INTERVAL 100 MICROSECOND;\n--> 10:10:10.000100\n\n* The event_time field in the mysql.general_log table and the start_time,\nquery_time, and lock_time fields in the mysql.slow_log table now store values\nwith microsecond precision.\n* This patch fixed a bug when comparing a temporal value using the BETWEEN\noperator and one of the operands is NULL.\n* The old syntax TIMESTAMP(N), where N is the display width, is no longer\nsupported. It was deprecated in MySQL 4.1.0 (released on\n 2003-04-03).\n* when a DATETIME value is compared to a TIME value, the latter is treated as\na full datetime with a zero date part, similar to comparing DATE to a\nDATETIME, or to comparing DECIMAL numbers.\n Earlier versions of MariaDB used to compare only the time part of both\noperands in such a case.\n* In MariaDB, an extra column TIME_MS has been added to the\nINFORMATION_SCHEMA.PROCESSLIST table, as well as to the output of SHOW FULL\nPROCESSLIST.\n\nNote: When you convert a temporal value to a value with a smaller precision,\nit will be truncated, not rounded. This is done to guarantee that the date\npart is not changed. For example:\n\nSELECT CAST(\'2009-12-31 23:59:59.998877\' as DATETIME(3));\n-> 2009-12-31 23:59:59.998\n\nMySQL 5.6 Microseconds\n----------------------\n\nMySQL 5.6 introduced microseconds using a slightly different implementation to\nMariaDB 5.3. Since MariaDB 10.1, MariaDB has defaulted to the MySQL format, by\nmeans of the --mysql56-temporal-format variable. The MySQL version requires\nslightly more storage but has some advantages in permitting the eventual\nsupport of negative dates, and in replication.\n\nURL: https://mariadb.com/kb/en/microseconds-in-mariadb/','','https://mariadb.com/kb/en/microseconds-in-mariadb/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (506,31,'Date and Time Units','The INTERVAL keyword can be used to add or subtract a time interval of time to\na DATETIME, DATE or TIME value.\n\nThe syntax is:\n\nINTERVAL time_quantity time_unit\n\nFor example, the SECOND unit is used below by the DATE_ADD() function:\n\nSELECT \'2008-12-31 23:59:59\' + INTERVAL 1 SECOND;\n+-------------------------------------------+\n| \'2008-12-31 23:59:59\' + INTERVAL 1 SECOND |\n+-------------------------------------------+\n| 2009-01-01 00:00:00                       |\n+-------------------------------------------+\n\nThe following units are valid:\n\n+---------------------+------------------------------------------------------+\n| Unit                | Description                                          |\n+---------------------+------------------------------------------------------+\n| MICROSECOND         | Microseconds                                         |\n+---------------------+------------------------------------------------------+\n| SECOND              | Seconds                                              |\n+---------------------+------------------------------------------------------+\n| MINUTE              | Minutes                                              |\n+---------------------+------------------------------------------------------+\n| HOUR                | Hours                                                |\n+---------------------+------------------------------------------------------+\n| DAY                 | Days                                                 |\n+---------------------+------------------------------------------------------+\n| WEEK                | Weeks                                                |\n+---------------------+------------------------------------------------------+\n| MONTH               | Months                                               |\n+---------------------+------------------------------------------------------+\n| QUARTER             | Quarters                                             |\n+---------------------+------------------------------------------------------+\n| YEAR                | Years                                                |\n+---------------------+------------------------------------------------------+\n| SECOND_MICROSECOND  | Seconds.Microseconds                                 |\n+---------------------+------------------------------------------------------+\n| MINUTE_MICROSECOND  | Minutes.Seconds.Microseconds                         |\n+---------------------+------------------------------------------------------+\n| MINUTE_SECOND       | Minutes.Seconds                                      |\n+---------------------+------------------------------------------------------+\n| HOUR_MICROSECOND    | Hours.Minutes.Seconds.Microseconds                   |\n+---------------------+------------------------------------------------------+\n| HOUR_SECOND         | Hours.Minutes.Seconds                                |\n+---------------------+------------------------------------------------------+\n| HOUR_MINUTE         | Hours.Minutes                                        |\n+---------------------+------------------------------------------------------+\n| DAY_MICROSECOND     | Days Hours.Minutes.Seconds.Microseconds              |\n+---------------------+------------------------------------------------------+\n| DAY_SECOND          | Days Hours.Minutes.Seconds                           |\n+---------------------+------------------------------------------------------+\n| DAY_MINUTE          | Days Hours.Minutes                                   |\n+---------------------+------------------------------------------------------+\n| DAY_HOUR            | Days Hours                                           |\n+---------------------+------------------------------------------------------+\n| YEAR_MONTH          | Years-Months                                         |\n+---------------------+------------------------------------------------------+\n\nThe time units containing an underscore are composite; that is, they consist\nof multiple base time units. For base time units, time_quantity is an integer\nnumber. For composite units, the quantity must be expressed as a string with\nmultiple integer numbers separated by any punctuation character.\n\nExample of composite units:\n\nINTERVAL \'2:2\' YEAR_MONTH\nINTERVAL \'1:30:30\' HOUR_SECOND\nINTERVAL \'1!30!30\' HOUR_SECOND -- same as above\n\nTime units can be used in the following contexts:\n\n* after a + or a - operator;\n* with the following DATE or TIME functions: ADDDATE(), SUBDATE(), DATE_ADD(),\nDATE_SUB(), TIMESTAMPADD(), TIMESTAMPDIFF(), EXTRACT();\n* in the ON SCHEDULE clause of CREATE EVENT and ALTER EVENT.\n* when defining a partitioning BY SYSTEM_TIME\n\nURL: https://mariadb.com/kb/en/date-and-time-units/','','https://mariadb.com/kb/en/date-and-time-units/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (507,31,'ADD_MONTHS','MariaDB starting with 10.6.1\n----------------------------\nThe ADD_MONTHS function was introduced in MariaDB 10.6.1 to enhance Oracle\ncompatibility. Similar functionality can be achieved with the DATE_ADD\nfunction.\n\nSyntax\n------\n\nADD_MONTHS(date, months)\n\nDescription\n-----------\n\nADD_MONTHS adds an integer months to a given date (DATE, DATETIME or\nTIMESTAMP), returning the resulting date.\n\nmonths can be positive or negative.\n\nThe resulting day component will remain the same as that specified in date,\nunless the resulting month has fewer days than the day component of the given\ndate, in which case the day will be the last day of the resulting month.\n\nReturns NULL if given an invalid date, or a NULL argument.\n\nExamples\n--------\n\nSELECT ADD_MONTHS(\'2012-01-31\', 2);\n+-----------------------------+\n| ADD_MONTHS(\'2012-01-31\', 2) |\n+-----------------------------+\n| 2012-03-31                  |\n+-----------------------------+\n\nSELECT ADD_MONTHS(\'2012-01-31\', -5);\n+------------------------------+\n| ADD_MONTHS(\'2012-01-31\', -5) |\n+------------------------------+\n| 2011-08-31                   |\n+------------------------------+\n\nSELECT ADD_MONTHS(\'2011-01-31\', 1);\n+-----------------------------+\n| ADD_MONTHS(\'2011-01-31\', 1) |\n+-----------------------------+\n| 2011-02-28                  |\n+-----------------------------+\n\nSELECT ADD_MONTHS(\'2012-01-31\', 1);\n+-----------------------------+\n| ADD_MONTHS(\'2012-01-31\', 1) |\n+-----------------------------+\n| 2012-02-29                  |\n+-----------------------------+\n\nSELECT ADD_MONTHS(\'2012-01-31\', 2);\n+-----------------------------+\n| ADD_MONTHS(\'2012-01-31\', 2) |\n+-----------------------------+\n| 2012-03-31                  |\n+-----------------------------+\n\nSELECT ADD_MONTHS(\'2012-01-31\', 3);\n+-----------------------------+\n| ADD_MONTHS(\'2012-01-31\', 3) |\n+-----------------------------+\n| 2012-04-30                  |\n+-----------------------------+\n\nURL: https://mariadb.com/kb/en/add_months/','','https://mariadb.com/kb/en/add_months/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (508,31,'ADDDATE','Syntax\n------\n\nADDDATE(date,INTERVAL expr unit), ADDDATE(expr,days)\n\nDescription\n-----------\n\nWhen invoked with the INTERVAL form of the second argument, ADDDATE() is a\nsynonym for DATE_ADD(). The related function SUBDATE() is a synonym for\nDATE_SUB(). For information on the INTERVAL unit argument, see the discussion\nfor DATE_ADD().\n\nWhen invoked with the days form of the second argument, MariaDB treats it as\nan integer number of days to be added to expr.\n\nExamples\n--------\n\nSELECT DATE_ADD(\'2008-01-02\', INTERVAL 31 DAY);\n+-----------------------------------------+\n| DATE_ADD(\'2008-01-02\', INTERVAL 31 DAY) |\n+-----------------------------------------+\n| 2008-02-02                              |\n+-----------------------------------------+\n\nSELECT ADDDATE(\'2008-01-02\', INTERVAL 31 DAY);\n+----------------------------------------+\n| ADDDATE(\'2008-01-02\', INTERVAL 31 DAY) |\n+----------------------------------------+\n| 2008-02-02                             |\n+----------------------------------------+\n\nSELECT ADDDATE(\'2008-01-02\', 31);\n+---------------------------+\n| ADDDATE(\'2008-01-02\', 31) |\n+---------------------------+\n| 2008-02-02                |\n+---------------------------+\n\nCREATE TABLE t1 (d DATETIME);\nINSERT INTO t1 VALUES\n  (\"2007-01-30 21:31:07\"),\n  (\"1983-10-15 06:42:51\"),\n  (\"2011-04-21 12:34:56\"),\n  (\"2011-10-30 06:31:41\"),\n  (\"2011-01-30 14:03:25\"),\n  (\"2004-10-07 11:19:34\");\n\nSELECT d, ADDDATE(d, 10) from t1;\n+---------------------+---------------------+\n| d                   | ADDDATE(d, 10)      |\n+---------------------+---------------------+\n| 2007-01-30 21:31:07 | 2007-02-09 21:31:07 |\n| 1983-10-15 06:42:51 | 1983-10-25 06:42:51 |\n| 2011-04-21 12:34:56 | 2011-05-01 12:34:56 |\n| 2011-10-30 06:31:41 | 2011-11-09 06:31:41 |\n| 2011-01-30 14:03:25 | 2011-02-09 14:03:25 |\n| 2004-10-07 11:19:34 | 2004-10-17 11:19:34 |\n+---------------------+---------------------+\n\nSELECT d, ADDDATE(d, INTERVAL 10 HOUR) from t1;\n+---------------------+------------------------------+\n| d                   | ADDDATE(d, INTERVAL 10 HOUR) |\n+---------------------+------------------------------+\n| 2007-01-30 21:31:07 | 2007-01-31 07:31:07          |\n| 1983-10-15 06:42:51 | 1983-10-15 16:42:51          |\n| 2011-04-21 12:34:56 | 2011-04-21 22:34:56          |\n| 2011-10-30 06:31:41 | 2011-10-30 16:31:41          |\n| 2011-01-30 14:03:25 | 2011-01-31 00:03:25          |\n| 2004-10-07 11:19:34 | 2004-10-07 21:19:34          |\n+---------------------+------------------------------+\n\nURL: https://mariadb.com/kb/en/adddate/','','https://mariadb.com/kb/en/adddate/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (509,31,'ADDTIME','Syntax\n------\n\nADDTIME(expr1,expr2)\n\nDescription\n-----------\n\nADDTIME() adds expr2 to expr1 and returns the result. expr1 is a time or\ndatetime expression, and expr2 is a time expression.\n\nExamples\n--------\n\nSELECT ADDTIME(\'2007-12-31 23:59:59.999999\', \'1 1:1:1.000002\');\n+---------------------------------------------------------+\n| ADDTIME(\'2007-12-31 23:59:59.999999\', \'1 1:1:1.000002\') |\n+---------------------------------------------------------+\n| 2008-01-02 01:01:01.000001                              |\n+---------------------------------------------------------+\n\nSELECT ADDTIME(\'01:00:00.999999\', \'02:00:00.999998\');\n+-----------------------------------------------+\n| ADDTIME(\'01:00:00.999999\', \'02:00:00.999998\') |\n+-----------------------------------------------+\n| 03:00:01.999997                               |\n+-----------------------------------------------+\n\nURL: https://mariadb.com/kb/en/addtime/','','https://mariadb.com/kb/en/addtime/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (510,31,'CONVERT_TZ','Syntax\n------\n\nCONVERT_TZ(dt,from_tz,to_tz)\n\nDescription\n-----------\n\nCONVERT_TZ() converts a datetime value dt from the time zone given by from_tz\nto the time zone given by to_tz and returns the resulting value.\n\nIn order to use named time zones, such as GMT, MET or Africa/Johannesburg, the\ntime_zone tables must be loaded (see mysql_tzinfo_to_sql).\n\nNo conversion will take place if the value falls outside of the supported\nTIMESTAMP range (\'1970-01-01 00:00:01\' to \'2038-01-19 05:14:07\' UTC) when\nconverted from from_tz to UTC.\n\nThis function returns NULL if the arguments are invalid (or named time zones\nhave not been loaded).\n\nSee time zones for more information.\n\nExamples\n--------\n\nSELECT CONVERT_TZ(\'2016-01-01 12:00:00\',\'+00:00\',\'+10:00\');\n+-----------------------------------------------------+\n| CONVERT_TZ(\'2016-01-01 12:00:00\',\'+00:00\',\'+10:00\') |\n+-----------------------------------------------------+\n| 2016-01-01 22:00:00                                 |\n+-----------------------------------------------------+\n\nUsing named time zones (with the time zone tables loaded):\n\nSELECT CONVERT_TZ(\'2016-01-01 12:00:00\',\'GMT\',\'Africa/Johannesburg\');\n+---------------------------------------------------------------+\n| CONVERT_TZ(\'2016-01-01 12:00:00\',\'GMT\',\'Africa/Johannesburg\') |\n+---------------------------------------------------------------+\n| 2016-01-01 14:00:00                                           |\n+---------------------------------------------------------------+\n\nThe value is out of the TIMESTAMP range, so no conversion takes place:\n\nSELECT CONVERT_TZ(\'1969-12-31 22:00:00\',\'+00:00\',\'+10:00\');\n+-----------------------------------------------------+\n| CONVERT_TZ(\'1969-12-31 22:00:00\',\'+00:00\',\'+10:00\') |\n+-----------------------------------------------------+\n| 1969-12-31 22:00:00                                 |\n+-----------------------------------------------------+\n\nURL: https://mariadb.com/kb/en/convert_tz/','','https://mariadb.com/kb/en/convert_tz/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (511,31,'CURDATE','Syntax\n------\n\nCURDATE()\nCURRENT_DATE\nCURRENT_DATE()\n\nDescription\n-----------\n\nCURDATE returns the current date as a value in \'YYYY-MM-DD\' or YYYYMMDD\nformat, depending on whether the function is used in a string or numeric\ncontext.\n\nCURRENT_DATE and CURRENT_DATE() are synonyms.\n\nExamples\n--------\n\nSELECT CURDATE();\n+------------+\n| CURDATE()  |\n+------------+\n| 2019-03-05 |\n+------------+\n\nIn a numeric context (note this is not performing date calculations):\n\nSELECT CURDATE() +0;\n+--------------+\n| CURDATE() +0 |\n+--------------+\n|     20190305 |\n+--------------+\n\nData calculation:\n\nSELECT CURDATE() - INTERVAL 5 DAY;\n+----------------------------+\n| CURDATE() - INTERVAL 5 DAY |\n+----------------------------+\n| 2019-02-28                 |\n+----------------------------+\n\nURL: https://mariadb.com/kb/en/curdate/','','https://mariadb.com/kb/en/curdate/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (512,31,'CURRENT_DATE','Syntax\n------\n\nCURRENT_DATE, CURRENT_DATE()\n\nDescription\n-----------\n\nCURRENT_DATE and CURRENT_DATE() are synonyms for CURDATE().\n\nURL: https://mariadb.com/kb/en/current_date/','','https://mariadb.com/kb/en/current_date/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (513,31,'CURRENT_TIME','Syntax\n------\n\nCURRENT_TIME\nCURRENT_TIME([precision])\n\nDescription\n-----------\n\nCURRENT_TIME and CURRENT_TIME() are synonyms for CURTIME().\n\nURL: https://mariadb.com/kb/en/current_time/','','https://mariadb.com/kb/en/current_time/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (514,31,'CURRENT_TIMESTAMP','Syntax\n------\n\nCURRENT_TIMESTAMP\nCURRENT_TIMESTAMP([precision])\n\nDescription\n-----------\n\nCURRENT_TIMESTAMP and CURRENT_TIMESTAMP() are synonyms for NOW().\n\nURL: https://mariadb.com/kb/en/current_timestamp/','','https://mariadb.com/kb/en/current_timestamp/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (515,31,'CURTIME','Syntax\n------\n\nCURTIME([precision])\n\nDescription\n-----------\n\nReturns the current time as a value in \'HH:MM:SS\' or HHMMSS.uuuuuu format,\ndepending on whether the function is used in a string or numeric context. The\nvalue is expressed in the current time zone.\n\nThe optional precision determines the microsecond precision. See Microseconds\nin MariaDB.\n\nExamples\n--------\n\nSELECT CURTIME();\n+-----------+\n| CURTIME() |\n+-----------+\n| 12:45:39  |\n+-----------+\n\nSELECT CURTIME() + 0;\n+---------------+\n| CURTIME() + 0 |\n+---------------+\n| 124545.000000 |\n+---------------+\n\nWith precision:\n\nSELECT CURTIME(2);\n+-------------+\n| CURTIME(2)  |\n+-------------+\n| 09:49:08.09 |\n+-------------+\n\nURL: https://mariadb.com/kb/en/curtime/','','https://mariadb.com/kb/en/curtime/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (516,31,'DATE FUNCTION','Syntax\n------\n\nDATE(expr)\n\nDescription\n-----------\n\nExtracts the date part of the date or datetime expression expr.\n\nExamples\n--------\n\nSELECT DATE(\'2013-07-18 12:21:32\');\n+-----------------------------+\n| DATE(\'2013-07-18 12:21:32\') |\n+-----------------------------+\n| 2013-07-18                  |\n+-----------------------------+\n\nError Handling\n--------------\n\nUntil MariaDB 5.5.32, some versions of MariaDB returned 0000-00-00 when passed\nan invalid date. From 5.5.32, NULL is returned.\n\nURL: https://mariadb.com/kb/en/date-function/','','https://mariadb.com/kb/en/date-function/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (517,31,'DATEDIFF','Syntax\n------\n\nDATEDIFF(expr1,expr2)\n\nDescription\n-----------\n\nDATEDIFF() returns (expr1 – expr2) expressed as a value in days from one date\nto the other. expr1 and expr2 are date or date-and-time expressions. Only the\ndate parts of the values are used in the calculation.\n\nExamples\n--------\n\nSELECT DATEDIFF(\'2007-12-31 23:59:59\',\'2007-12-30\');\n+----------------------------------------------+\n| DATEDIFF(\'2007-12-31 23:59:59\',\'2007-12-30\') |\n+----------------------------------------------+\n|                                            1 |\n+----------------------------------------------+\n\nSELECT DATEDIFF(\'2010-11-30 23:59:59\',\'2010-12-31\');\n+----------------------------------------------+\n| DATEDIFF(\'2010-11-30 23:59:59\',\'2010-12-31\') |\n+----------------------------------------------+\n|                                          -31 |\n+----------------------------------------------+\n\nCREATE TABLE t1 (d DATETIME);\nINSERT INTO t1 VALUES\n  (\"2007-01-30 21:31:07\"),\n  (\"1983-10-15 06:42:51\"),\n  (\"2011-04-21 12:34:56\"),\n  (\"2011-10-30 06:31:41\"),\n  (\"2011-01-30 14:03:25\"),\n  (\"2004-10-07 11:19:34\");\n\nSELECT NOW();\n+---------------------+\n| NOW()               |\n+---------------------+\n| 2011-05-23 10:56:05 |\n+---------------------+\n\nSELECT d, DATEDIFF(NOW(),d) FROM t1;\n+---------------------+-------------------+\n| d                   | DATEDIFF(NOW(),d) |\n+---------------------+-------------------+\n| 2007-01-30 21:31:07 |              1574 |\n| 1983-10-15 06:42:51 |             10082 |\n| 2011-04-21 12:34:56 |                32 |\n| 2011-10-30 06:31:41 |              -160 |\n| 2011-01-30 14:03:25 |               113 |\n| 2004-10-07 11:19:34 |              2419 |\n+---------------------+-------------------+\n\nURL: https://mariadb.com/kb/en/datediff/','','https://mariadb.com/kb/en/datediff/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (518,31,'DATE_ADD','Syntax\n------\n\nDATE_ADD(date,INTERVAL expr unit)\n\nDescription\n-----------\n\nPerforms date arithmetic. The date argument specifies the starting date or\ndatetime value. expr is an expression specifying the interval value to be\nadded or subtracted from the starting date. expr is a string; it may start\nwith a \"-\" for negative intervals. unit is a keyword indicating the units in\nwhich the expression should be interpreted. See Date and Time Units for a\ncomplete list of permitted units.\n\nExamples\n--------\n\nSELECT \'2008-12-31 23:59:59\' + INTERVAL 1 SECOND;\n+-------------------------------------------+\n| \'2008-12-31 23:59:59\' + INTERVAL 1 SECOND |\n+-------------------------------------------+\n| 2009-01-01 00:00:00                       |\n+-------------------------------------------+\n\nSELECT INTERVAL 1 DAY + \'2008-12-31\';\n+-------------------------------+\n| INTERVAL 1 DAY + \'2008-12-31\' |\n+-------------------------------+\n| 2009-01-01                    |\n+-------------------------------+\n\nSELECT \'2005-01-01\' - INTERVAL 1 SECOND;\n+----------------------------------+\n| \'2005-01-01\' - INTERVAL 1 SECOND |\n+----------------------------------+\n| 2004-12-31 23:59:59              |\n+----------------------------------+\n\nSELECT DATE_ADD(\'2000-12-31 23:59:59\', INTERVAL 1 SECOND);\n+----------------------------------------------------+\n| DATE_ADD(\'2000-12-31 23:59:59\', INTERVAL 1 SECOND) |\n+----------------------------------------------------+\n| 2001-01-01 00:00:00                                |\n+----------------------------------------------------+\n\nSELECT DATE_ADD(\'2010-12-31 23:59:59\', INTERVAL 1 DAY);\n+-------------------------------------------------+\n| DATE_ADD(\'2010-12-31 23:59:59\', INTERVAL 1 DAY) |\n+-------------------------------------------------+\n| 2011-01-01 23:59:59                             |\n+-------------------------------------------------+\n\nSELECT DATE_ADD(\'2100-12-31 23:59:59\', INTERVAL \'1:1\' MINUTE_SECOND);\n+---------------------------------------------------------------+\n| DATE_ADD(\'2100-12-31 23:59:59\', INTERVAL \'1:1\' MINUTE_SECOND) |\n+---------------------------------------------------------------+\n| 2101-01-01 00:01:00                                           |\n+---------------------------------------------------------------+\n\nSELECT DATE_ADD(\'1900-01-01 00:00:00\', INTERVAL \'-1 10\' DAY_HOUR);\n+------------------------------------------------------------+\n| DATE_ADD(\'1900-01-01 00:00:00\', INTERVAL \'-1 10\' DAY_HOUR) |\n+------------------------------------------------------------+\n| 1899-12-30 14:00:00                                        |\n+------------------------------------------------------------+\n\nSELECT DATE_ADD(\'1992-12-31 23:59:59.000002\', INTERVAL \'1.999999\'\nSECOND_MICROSECOND);\n+------------------------------------------------------------------------------\n-+\n| DATE_ADD(\'1992-12-31 23:59:59.000002\', INTERVAL \'1.999999\'\nSECOND_MICROSECOND) |\n+------------------------------------------------------------------------------\n-+\n| 1993-01-01 00:00:01.000001                                                  \n |\n+------------------------------------------------------------------------------\n-+\n\nURL: https://mariadb.com/kb/en/date_add/','','https://mariadb.com/kb/en/date_add/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (519,31,'DATE_FORMAT','Syntax\n------\n\nDATE_FORMAT(date, format[, locale])\n\nDescription\n-----------\n\nFormats the date value according to the format string.\n\nThe language used for the names is controlled by the value of the\nlc_time_names system variable. See server locale for more on the supported\nlocales.\n\nThe options that can be used by DATE_FORMAT(), as well as its inverse\nSTR_TO_DATE() and the FROM_UNIXTIME() function, are:\n\n+---------------------------+------------------------------------------------+\n| Option                    | Description                                    |\n+---------------------------+------------------------------------------------+\n| %a                        | Short weekday name in current locale           |\n|                           | (Variable lc_time_names).                      |\n+---------------------------+------------------------------------------------+\n| %b                        | Short form month name in current locale. For   |\n|                           | locale en_US this is one of:                   |\n|                           | Jan,Feb,Mar,Apr,May,Jun,Jul,Aug,Sep,Oct,Nov    |\n|                           | or Dec.                                        |\n+---------------------------+------------------------------------------------+\n| %c                        | Month with 1 or 2 digits.                      |\n+---------------------------+------------------------------------------------+\n| %D                        | Day with English suffix \'th\', \'nd\', \'st\' or    |\n|                           | \'rd\'\'. (1st, 2nd, 3rd...).                     |\n+---------------------------+------------------------------------------------+\n| %d                        | Day with 2 digits.                             |\n+---------------------------+------------------------------------------------+\n| %e                        | Day with 1 or 2 digits.                        |\n+---------------------------+------------------------------------------------+\n| %f                        | Microseconds 6 digits.                         |\n+---------------------------+------------------------------------------------+\n| %H                        | Hour with 2 digits between 00-23.              |\n+---------------------------+------------------------------------------------+\n| %h                        | Hour with 2 digits between 01-12.              |\n+---------------------------+------------------------------------------------+\n| %I                        | Hour with 2 digits between 01-12.              |\n+---------------------------+------------------------------------------------+\n| %i                        | Minute with 2 digits.                          |\n+---------------------------+------------------------------------------------+\n| %j                        | Day of the year (001-366)                      |\n+---------------------------+------------------------------------------------+\n| %k                        | Hour with 1 digits between 0-23.               |\n+---------------------------+------------------------------------------------+\n| %l                        | Hour with 1 digits between 1-12.               |\n+---------------------------+------------------------------------------------+\n| %M                        | Full month name in current locale (Variable    |\n|                           | lc_time_names).                                |\n+---------------------------+------------------------------------------------+\n| %m                        | Month with 2 digits.                           |\n+---------------------------+------------------------------------------------+\n| %p                        | AM/PM according to current locale (Variable    |\n|                           | lc_time_names).                                |\n+---------------------------+------------------------------------------------+\n| %r                        | Time in 12 hour format, followed by AM/PM.     |\n|                           | Short for \'%I:%i:%S %p\'.                       |\n+---------------------------+------------------------------------------------+\n| %S                        | Seconds with 2 digits.                         |\n+---------------------------+------------------------------------------------+\n| %s                        | Seconds with 2 digits.                         |\n+---------------------------+------------------------------------------------+\n| %T                        | Time in 24 hour format. Short for \'%H:%i:%S\'.  |\n+---------------------------+------------------------------------------------+\n| %U                        | Week number (00-53), when first day of the     |\n|                           | week is Sunday.                                |\n+---------------------------+------------------------------------------------+\n| %u                        | Week number (00-53), when first day of the     |\n|                           | week is Monday.                                |\n+---------------------------+------------------------------------------------+\n| %V                        | Week number (01-53), when first day of the     |\n|                           | week is Sunday. Used with %X.                  |\n+---------------------------+------------------------------------------------+\n| %v                        | Week number (01-53), when first day of the     |\n|                           | week is Monday. Used with %x.                  |\n+---------------------------+------------------------------------------------+\n| %W                        | Full weekday name in current locale (Variable  |\n|                           | lc_time_names).                                |\n+---------------------------+------------------------------------------------+\n| %w                        | Day of the week. 0 = Sunday, 6 = Saturday.     |\n+---------------------------+------------------------------------------------+\n| %X                        | Year with 4 digits when first day of the week  |\n|                           | is Sunday. Used with %V.                       |\n+---------------------------+------------------------------------------------+\n| %x                        | Year with 4 digits when first day of the week  |\n|                           | is Monday. Used with %v.                       |\n+---------------------------+------------------------------------------------+\n| %Y                        | Year with 4 digits.                            |\n+---------------------------+------------------------------------------------+\n| %y                        | Year with 2 digits.                            |\n+---------------------------+------------------------------------------------+\n| %#                        | For str_to_date(), skip all numbers.           |\n+---------------------------+------------------------------------------------+\n| %.                        | For str_to_date(), skip all punctation         |\n|                           | characters.                                    |\n+---------------------------+------------------------------------------------+\n| %@                        | For str_to_date(), skip all alpha characters.  |\n+---------------------------+------------------------------------------------+\n| %%                        | A literal % character.                         |\n+---------------------------+------------------------------------------------+\n\nTo get a date in one of the standard formats, GET_FORMAT() can be used.\n\nExamples\n--------\n\nSELECT DATE_FORMAT(\'2009-10-04 22:23:00\', \'%W %M %Y\');\n+------------------------------------------------+\n| DATE_FORMAT(\'2009-10-04 22:23:00\', \'%W %M %Y\') |\n+------------------------------------------------+\n| Sunday October 2009                            |\n+------------------------------------------------+\n\nSELECT DATE_FORMAT(\'2007-10-04 22:23:00\', \'%H:%i:%s\');\n+------------------------------------------------+\n| DATE_FORMAT(\'2007-10-04 22:23:00\', \'%H:%i:%s\') |\n+------------------------------------------------+\n| 22:23:00                                       |\n+------------------------------------------------+\n\nSELECT DATE_FORMAT(\'1900-10-04 22:23:00\', \'%D %y %a %d %m %b %j\');\n+------------------------------------------------------------+\n| DATE_FORMAT(\'1900-10-04 22:23:00\', \'%D %y %a %d %m %b %j\') |\n+------------------------------------------------------------+\n| 4th 00 Thu 04 10 Oct 277                                   |\n+------------------------------------------------------------+\n\nSELECT DATE_FORMAT(\'1997-10-04 22:23:00\', \'%H %k %I %r %T %S %w\');\n+------------------------------------------------------------+\n| DATE_FORMAT(\'1997-10-04 22:23:00\', \'%H %k %I %r %T %S %w\') |\n+------------------------------------------------------------+\n| 22 22 10 10:23:00 PM 22:23:00 00 6                         |\n+------------------------------------------------------------+\n\nSELECT DATE_FORMAT(\'1999-01-01\', \'%X %V\');\n+------------------------------------+\n| DATE_FORMAT(\'1999-01-01\', \'%X %V\') |\n+------------------------------------+\n| 1998 52                            |\n+------------------------------------+\n\nSELECT DATE_FORMAT(\'2006-06-00\', \'%d\');\n+---------------------------------+\n| DATE_FORMAT(\'2006-06-00\', \'%d\') |\n+---------------------------------+\n| 00                              |\n+---------------------------------+\n\nMariaDB starting with 10.3.2\n----------------------------\nOptionally, the locale can be explicitly specified as the third DATE_FORMAT()\nargument. Doing so makes the function independent from the session settings,\nand the three argument version of DATE_FORMAT() can be used in virtual indexed\nand persistent generated-columns:\n\nSELECT DATE_FORMAT(\'2006-01-01\', \'%W\', \'el_GR\');\n+------------------------------------------+\n| DATE_FORMAT(\'2006-01-01\', \'%W\', \'el_GR\') |\n+------------------------------------------+\n| Κυριακή                                  |\n+------------------------------------------+\n\nURL: https://mariadb.com/kb/en/date_format/','','https://mariadb.com/kb/en/date_format/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (520,31,'DATE_SUB','Syntax\n------\n\nDATE_SUB(date,INTERVAL expr unit)\n\nDescription\n-----------\n\nPerforms date arithmetic. The date argument specifies the starting date or\ndatetime value. expr is an expression specifying the interval value to be\nadded or subtracted from the starting date. expr is a string; it may start\nwith a \"-\" for negative intervals. unit is a keyword indicating the units in\nwhich the expression should be interpreted. See Date and Time Units for a\ncomplete list of permitted units.\n\nSee also DATE_ADD().\n\nExamples\n--------\n\nSELECT DATE_SUB(\'1998-01-02\', INTERVAL 31 DAY);\n+-----------------------------------------+\n| DATE_SUB(\'1998-01-02\', INTERVAL 31 DAY) |\n+-----------------------------------------+\n| 1997-12-02                              |\n+-----------------------------------------+\n\nSELECT DATE_SUB(\'2005-01-01 00:00:00\', INTERVAL \'1 1:1:1\' DAY_SECOND);\n+----------------------------------------------------------------+\n| DATE_SUB(\'2005-01-01 00:00:00\', INTERVAL \'1 1:1:1\' DAY_SECOND) |\n+----------------------------------------------------------------+\n| 2004-12-30 22:58:59                                            |\n+----------------------------------------------------------------+\n\nURL: https://mariadb.com/kb/en/date_sub/','','https://mariadb.com/kb/en/date_sub/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (521,31,'DAY','Syntax\n------\n\nDAY(date)\n\nDescription\n-----------\n\nDAY() is a synonym for DAYOFMONTH().\n\nURL: https://mariadb.com/kb/en/day/','','https://mariadb.com/kb/en/day/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (522,31,'DAYNAME','Syntax\n------\n\nDAYNAME(date)\n\nDescription\n-----------\n\nReturns the name of the weekday for date. The language used for the name is\ncontrolled by the value of the lc_time_names system variable. See server\nlocale for more on the supported locales.\n\nExamples\n--------\n\nSELECT DAYNAME(\'2007-02-03\');\n+-----------------------+\n| DAYNAME(\'2007-02-03\') |\n+-----------------------+\n| Saturday              |\n+-----------------------+\n\nCREATE TABLE t1 (d DATETIME);\nINSERT INTO t1 VALUES\n  (\"2007-01-30 21:31:07\"),\n  (\"1983-10-15 06:42:51\"),\n  (\"2011-04-21 12:34:56\"),\n  (\"2011-10-30 06:31:41\"),\n  (\"2011-01-30 14:03:25\"),\n  (\"2004-10-07 11:19:34\");\n\nSELECT d, DAYNAME(d) FROM t1;\n+---------------------+------------+\n| d                   | DAYNAME(d) |\n+---------------------+------------+\n| 2007-01-30 21:31:07 | Tuesday    |\n| 1983-10-15 06:42:51 | Saturday   |\n| 2011-04-21 12:34:56 | Thursday   |\n| 2011-10-30 06:31:41 | Sunday     |\n| 2011-01-30 14:03:25 | Sunday     |\n| 2004-10-07 11:19:34 | Thursday   |\n+---------------------+------------+\n\nChanging the locale:\n\nSET lc_time_names = \'fr_CA\';\n\nSELECT DAYNAME(\'2013-04-01\');\n+-----------------------+\n| DAYNAME(\'2013-04-01\') |\n+-----------------------+\n| lundi                 |\n+-----------------------+\n\nURL: https://mariadb.com/kb/en/dayname/','','https://mariadb.com/kb/en/dayname/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (523,31,'DAYOFMONTH','Syntax\n------\n\nDAYOFMONTH(date)\n\nDescription\n-----------\n\nReturns the day of the month for date, in the range 1 to 31, or 0 for dates\nsuch as \'0000-00-00\' or \'2008-00-00\' which have a zero day part.\n\nDAY() is a synonym.\n\nExamples\n--------\n\nSELECT DAYOFMONTH(\'2007-02-03\');\n+--------------------------+\n| DAYOFMONTH(\'2007-02-03\') |\n+--------------------------+\n|                        3 |\n+--------------------------+\n\nCREATE TABLE t1 (d DATETIME);\nINSERT INTO t1 VALUES\n  (\"2007-01-30 21:31:07\"),\n  (\"1983-10-15 06:42:51\"),\n  (\"2011-04-21 12:34:56\"),\n  (\"2011-10-30 06:31:41\"),\n  (\"2011-01-30 14:03:25\"),\n  (\"2004-10-07 11:19:34\");\n\nSELECT d FROM t1 where DAYOFMONTH(d) = 30;\n+---------------------+\n| d                   |\n+---------------------+\n| 2007-01-30 21:31:07 |\n| 2011-10-30 06:31:41 |\n| 2011-01-30 14:03:25 |\n+---------------------+\n\nURL: https://mariadb.com/kb/en/dayofmonth/','','https://mariadb.com/kb/en/dayofmonth/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (524,31,'DAYOFWEEK','Syntax\n------\n\nDAYOFWEEK(date)\n\nDescription\n-----------\n\nReturns the day of the week index for the date (1 = Sunday, 2 = Monday, ..., 7\n= Saturday). These index values correspond to the ODBC standard.\n\nThis contrasts with WEEKDAY() which follows a different index numbering (0 =\nMonday, 1 = Tuesday, ... 6 = Sunday).\n\nExamples\n--------\n\nSELECT DAYOFWEEK(\'2007-02-03\');\n+-------------------------+\n| DAYOFWEEK(\'2007-02-03\') |\n+-------------------------+\n|                       7 |\n+-------------------------+\n\nCREATE TABLE t1 (d DATETIME);\nINSERT INTO t1 VALUES\n  (\"2007-01-30 21:31:07\"),\n  (\"1983-10-15 06:42:51\"),\n  (\"2011-04-21 12:34:56\"),\n  (\"2011-10-30 06:31:41\"),\n  (\"2011-01-30 14:03:25\"),\n  (\"2004-10-07 11:19:34\");\n\nSELECT d, DAYNAME(d), DAYOFWEEK(d), WEEKDAY(d) from t1;\n+---------------------+------------+--------------+------------+\n| d                   | DAYNAME(d) | DAYOFWEEK(d) | WEEKDAY(d) |\n+---------------------+------------+--------------+------------+\n| 2007-01-30 21:31:07 | Tuesday    |            3 |          1 |\n| 1983-10-15 06:42:51 | Saturday   |            7 |          5 |\n| 2011-04-21 12:34:56 | Thursday   |            5 |          3 |\n| 2011-10-30 06:31:41 | Sunday     |            1 |          6 |\n| 2011-01-30 14:03:25 | Sunday     |            1 |          6 |\n| 2004-10-07 11:19:34 | Thursday   |            5 |          3 |\n+---------------------+------------+--------------+------------+\n\nURL: https://mariadb.com/kb/en/dayofweek/','','https://mariadb.com/kb/en/dayofweek/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (525,31,'DAYOFYEAR','Syntax\n------\n\nDAYOFYEAR(date)\n\nDescription\n-----------\n\nReturns the day of the year for date, in the range 1 to 366.\n\nExamples\n--------\n\nSELECT DAYOFYEAR(\'2018-02-16\');\n+-------------------------+\n| DAYOFYEAR(\'2018-02-16\') |\n+-------------------------+\n|                      47 |\n+-------------------------+\n\nURL: https://mariadb.com/kb/en/dayofyear/','','https://mariadb.com/kb/en/dayofyear/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (526,31,'EXTRACT','Syntax\n------\n\nEXTRACT(unit FROM date)\n\nDescription\n-----------\n\nThe EXTRACT() function extracts the required unit from the date. See Date and\nTime Units for a complete list of permitted units.\n\nIn MariaDB 10.0.7 and MariaDB 5.5.35, EXTRACT (HOUR FROM ...) was changed to\nreturn a value from 0 to 23, adhering to the SQL standard. Until MariaDB\n10.0.6 and MariaDB 5.5.34, and in all versions of MySQL at least as of MySQL\n5.7, it could return a value > 23. HOUR() is not a standard function, so\ncontinues to adhere to the old behaviour inherited from MySQL.\n\nExamples\n--------\n\nSELECT EXTRACT(YEAR FROM \'2009-07-02\');\n+---------------------------------+\n| EXTRACT(YEAR FROM \'2009-07-02\') |\n+---------------------------------+\n|                            2009 |\n+---------------------------------+\n\nSELECT EXTRACT(YEAR_MONTH FROM \'2009-07-02 01:02:03\');\n+------------------------------------------------+\n| EXTRACT(YEAR_MONTH FROM \'2009-07-02 01:02:03\') |\n+------------------------------------------------+\n|                                         200907 |\n+------------------------------------------------+\n\nSELECT EXTRACT(DAY_MINUTE FROM \'2009-07-02 01:02:03\');\n+------------------------------------------------+\n| EXTRACT(DAY_MINUTE FROM \'2009-07-02 01:02:03\') |\n+------------------------------------------------+\n|                                          20102 |\n+------------------------------------------------+\n\nSELECT EXTRACT(MICROSECOND FROM \'2003-01-02 10:30:00.000123\');\n+--------------------------------------------------------+\n| EXTRACT(MICROSECOND FROM \'2003-01-02 10:30:00.000123\') |\n+--------------------------------------------------------+\n|                                                    123 |\n+--------------------------------------------------------+\n\nFrom MariaDB 10.0.7 and MariaDB 5.5.35, EXTRACT (HOUR FROM...) returns a value\nfrom 0 to 23, as per the SQL standard. HOUR is not a standard function, so\ncontinues to adhere to the old behaviour inherited from MySQL.\n\nSELECT EXTRACT(HOUR FROM \'26:30:00\'), HOUR(\'26:30:00\');\n+-------------------------------+------------------+\n| EXTRACT(HOUR FROM \'26:30:00\') | HOUR(\'26:30:00\') |\n+-------------------------------+------------------+\n|                             2 |               26 |\n+-------------------------------+------------------+\n\nURL: https://mariadb.com/kb/en/extract/','','https://mariadb.com/kb/en/extract/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (527,31,'FROM_DAYS','Syntax\n------\n\nFROM_DAYS(N)\n\nDescription\n-----------\n\nGiven a day number N, returns a DATE value. The day count is based on the\nnumber of days from the start of the standard calendar (0000-00-00).\n\nThe function is not designed for use with dates before the advent of the\nGregorian calendar in October 1582. Results will not be reliable since it\ndoesn\'t account for the lost days when the calendar changed from the Julian\ncalendar.\n\nThis is the converse of the TO_DAYS() function.\n\nExamples\n--------\n\nSELECT FROM_DAYS(730669);\n+-------------------+\n| FROM_DAYS(730669) |\n+-------------------+\n| 2000-07-03        |\n+-------------------+\n\nURL: https://mariadb.com/kb/en/from_days/','','https://mariadb.com/kb/en/from_days/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (528,31,'FROM_UNIXTIME','Syntax\n------\n\nFROM_UNIXTIME(unix_timestamp), FROM_UNIXTIME(unix_timestamp,format)\n\nDescription\n-----------\n\nReturns a representation of the unix_timestamp argument as a value in\n\'YYYY-MM-DD HH:MM:SS\' or YYYYMMDDHHMMSS.uuuuuu format, depending on whether\nthe function is used in a string or numeric context. The value is expressed in\nthe current time zone. unix_timestamp is an internal timestamp value such as\nis produced by the UNIX_TIMESTAMP() function.\n\nIf format is given, the result is formatted according to the format string,\nwhich is used the same way as listed in the entry for the DATE_FORMAT()\nfunction.\n\nTimestamps in MariaDB have a maximum value of 2147483647, equivalent to\n2038-01-19 05:14:07. This is due to the underlying 32-bit limitation. Using\nthe function on a timestamp beyond this will result in NULL being returned.\nUse DATETIME as a storage type if you require dates beyond this.\n\nThe options that can be used by FROM_UNIXTIME(), as well as DATE_FORMAT() and\nSTR_TO_DATE(), are:\n\n+---------------------------+------------------------------------------------+\n| Option                    | Description                                    |\n+---------------------------+------------------------------------------------+\n| %a                        | Short weekday name in current locale           |\n|                           | (Variable lc_time_names).                      |\n+---------------------------+------------------------------------------------+\n| %b                        | Short form month name in current locale. For   |\n|                           | locale en_US this is one of:                   |\n|                           | Jan,Feb,Mar,Apr,May,Jun,Jul,Aug,Sep,Oct,Nov    |\n|                           | or Dec.                                        |\n+---------------------------+------------------------------------------------+\n| %c                        | Month with 1 or 2 digits.                      |\n+---------------------------+------------------------------------------------+\n| %D                        | Day with English suffix \'th\', \'nd\', \'st\' or    |\n|                           | \'rd\'\'. (1st, 2nd, 3rd...).                     |\n+---------------------------+------------------------------------------------+\n| %d                        | Day with 2 digits.                             |\n+---------------------------+------------------------------------------------+\n| %e                        | Day with 1 or 2 digits.                        |\n+---------------------------+------------------------------------------------+\n| %f                        | Microseconds 6 digits.                         |\n+---------------------------+------------------------------------------------+\n| %H                        | Hour with 2 digits between 00-23.              |\n+---------------------------+------------------------------------------------+\n| %h                        | Hour with 2 digits between 01-12.              |\n+---------------------------+------------------------------------------------+\n| %I                        | Hour with 2 digits between 01-12.              |\n+---------------------------+------------------------------------------------+\n| %i                        | Minute with 2 digits.                          |\n+---------------------------+------------------------------------------------+\n| %j                        | Day of the year (001-366)                      |\n+---------------------------+------------------------------------------------+\n| %k                        | Hour with 1 digits between 0-23.               |\n+---------------------------+------------------------------------------------+\n| %l                        | Hour with 1 digits between 1-12.               |\n+---------------------------+------------------------------------------------+\n| %M                        | Full month name in current locale (Variable    |\n|                           | lc_time_names).                                |\n+---------------------------+------------------------------------------------+\n| %m                        | Month with 2 digits.                           |\n+---------------------------+------------------------------------------------+\n| %p                        | AM/PM according to current locale (Variable    |\n|                           | lc_time_names).                                |\n+---------------------------+------------------------------------------------+\n| %r                        | Time in 12 hour format, followed by AM/PM.     |\n|                           | Short for \'%I:%i:%S %p\'.                       |\n+---------------------------+------------------------------------------------+\n| %S                        | Seconds with 2 digits.                         |\n+---------------------------+------------------------------------------------+\n| %s                        | Seconds with 2 digits.                         |\n+---------------------------+------------------------------------------------+\n| %T                        | Time in 24 hour format. Short for \'%H:%i:%S\'.  |\n+---------------------------+------------------------------------------------+\n| %U                        | Week number (00-53), when first day of the     |\n|                           | week is Sunday.                                |\n+---------------------------+------------------------------------------------+\n| %u                        | Week number (00-53), when first day of the     |\n|                           | week is Monday.                                |\n+---------------------------+------------------------------------------------+\n| %V                        | Week number (01-53), when first day of the     |\n|                           | week is Sunday. Used with %X.                  |\n+---------------------------+------------------------------------------------+\n| %v                        | Week number (01-53), when first day of the     |\n|                           | week is Monday. Used with %x.                  |\n+---------------------------+------------------------------------------------+\n| %W                        | Full weekday name in current locale (Variable  |\n|                           | lc_time_names).                                |\n+---------------------------+------------------------------------------------+\n| %w                        | Day of the week. 0 = Sunday, 6 = Saturday.     |\n+---------------------------+------------------------------------------------+\n| %X                        | Year with 4 digits when first day of the week  |\n|                           | is Sunday. Used with %V.                       |\n+---------------------------+------------------------------------------------+\n| %x                        | Year with 4 digits when first day of the week  |\n|                           | is Sunday. Used with %v.                       |\n+---------------------------+------------------------------------------------+\n| %Y                        | Year with 4 digits.                            |\n+---------------------------+------------------------------------------------+\n| %y                        | Year with 2 digits.                            |\n+---------------------------+------------------------------------------------+\n| %#                        | For str_to_date(), skip all numbers.           |\n+---------------------------+------------------------------------------------+\n| %.                        | For str_to_date(), skip all punctation         |\n|                           | characters.                                    |\n+---------------------------+------------------------------------------------+\n| %@                        | For str_to_date(), skip all alpha characters.  |\n+---------------------------+------------------------------------------------+\n| %%                        | A literal % character.                         |\n+---------------------------+------------------------------------------------+\n\nPerformance Considerations\n--------------------------\n\nIf your session time zone is set to SYSTEM (the default), FROM_UNIXTIME() will\ncall the OS function to convert the data using the system time zone. At least\non Linux, the corresponding function (localtime_r) uses a global mutex inside\nglibc that can cause contention under high concurrent load.\n\nSet your time zone to a named time zone to avoid this issue. See mysql time\nzone tables for details on how to do this.\n\nExamples\n--------\n\nSELECT FROM_UNIXTIME(1196440219);\n+---------------------------+\n| FROM_UNIXTIME(1196440219) |\n+---------------------------+\n| 2007-11-30 11:30:19       |\n+---------------------------+\n\nSELECT FROM_UNIXTIME(1196440219) + 0;\n+-------------------------------+\n| FROM_UNIXTIME(1196440219) + 0 |\n+-------------------------------+\n|         20071130113019.000000 |\n+-------------------------------+\n\nSELECT FROM_UNIXTIME(UNIX_TIMESTAMP(), \'%Y %D %M %h:%i:%s %x\');\n+---------------------------------------------------------+\n| FROM_UNIXTIME(UNIX_TIMESTAMP(), \'%Y %D %M %h:%i:%s %x\') |\n+---------------------------------------------------------+\n| 2010 27th March 01:03:47 2010                           |\n+---------------------------------------------------------+\n\nURL: https://mariadb.com/kb/en/from_unixtime/','','https://mariadb.com/kb/en/from_unixtime/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (529,31,'GET_FORMAT','Syntax\n------\n\nGET_FORMAT({DATE|DATETIME|TIME}, {\'EUR\'|\'USA\'|\'JIS\'|\'ISO\'|\'INTERNAL\'})\n\nDescription\n-----------\n\nReturns a format string. This function is useful in combination with the\nDATE_FORMAT() and the STR_TO_DATE() functions.\n\nPossible result formats are:\n\n+--------------------------------------+--------------------------------------+\n| Function Call                        | Result Format                        |\n+--------------------------------------+--------------------------------------+\n| GET_FORMAT(DATE,\'EUR\')               | \'%d.%m.%Y\'                           |\n+--------------------------------------+--------------------------------------+\n| GET_FORMAT(DATE,\'USA\')               | \'%m.%d.%Y\'                           |\n+--------------------------------------+--------------------------------------+\n| GET_FORMAT(DATE,\'JIS\')               | \'%Y-%m-%d\'                           |\n+--------------------------------------+--------------------------------------+\n| GET_FORMAT(DATE,\'ISO\')               | \'%Y-%m-%d\'                           |\n+--------------------------------------+--------------------------------------+\n| GET_FORMAT(DATE,\'INTERNAL\')          | \'%Y%m%d\'                             |\n+--------------------------------------+--------------------------------------+\n| GET_FORMAT(DATETIME,\'EUR\')           | \'%Y-%m-%d %H.%i.%s\'                  |\n+--------------------------------------+--------------------------------------+\n| GET_FORMAT(DATETIME,\'USA\')           | \'%Y-%m-%d %H.%i.%s\'                  |\n+--------------------------------------+--------------------------------------+\n| GET_FORMAT(DATETIME,\'JIS\')           | \'%Y-%m-%d %H:%i:%s\'                  |\n+--------------------------------------+--------------------------------------+\n| GET_FORMAT(DATETIME,\'ISO\')           | \'%Y-%m-%d %H:%i:%s\'                  |\n+--------------------------------------+--------------------------------------+\n| GET_FORMAT(DATETIME,\'INTERNAL\')      | \'%Y%m%d%H%i%s\'                       |\n+--------------------------------------+--------------------------------------+\n| GET_FORMAT(TIME,\'EUR\')               | \'%H.%i.%s\'                           |\n+--------------------------------------+--------------------------------------+\n| GET_FORMAT(TIME,\'USA\')               | \'%h:%i:%s %p\'                        |\n+--------------------------------------+--------------------------------------+\n| GET_FORMAT(TIME,\'JIS\')               | \'%H:%i:%s\'                           |\n+--------------------------------------+--------------------------------------+\n| GET_FORMAT(TIME,\'ISO\')               | \'%H:%i:%s\'                           |\n+--------------------------------------+--------------------------------------+\n| GET_FORMAT(TIME,\'INTERNAL\')          | \'%H%i%s\'                             |\n+--------------------------------------+--------------------------------------+\n\nExamples\n--------\n\nObtaining the string matching to the standard European date format:\n\nSELECT GET_FORMAT(DATE, \'EUR\');\n+-------------------------+\n| GET_FORMAT(DATE, \'EUR\') |\n+-------------------------+\n| %d.%m.%Y                |\n+-------------------------+\n\nUsing the same string to format a date:\n\nSELECT DATE_FORMAT(\'2003-10-03\',GET_FORMAT(DATE,\'EUR\'));\n+--------------------------------------------------+\n| DATE_FORMAT(\'2003-10-03\',GET_FORMAT(DATE,\'EUR\')) |\n+--------------------------------------------------+\n| 03.10.2003                                       |\n+--------------------------------------------------+\n\nSELECT STR_TO_DATE(\'10.31.2003\',GET_FORMAT(DATE,\'USA\'));\n+--------------------------------------------------+\n| STR_TO_DATE(\'10.31.2003\',GET_FORMAT(DATE,\'USA\')) |\n+--------------------------------------------------+\n| 2003-10-31                                       |\n+--------------------------------------------------+\n\nURL: https://mariadb.com/kb/en/get_format/','','https://mariadb.com/kb/en/get_format/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (530,31,'HOUR','Syntax\n------\n\nHOUR(time)\n\nDescription\n-----------\n\nReturns the hour for time. The range of the return value is 0 to 23 for\ntime-of-day values. However, the range of TIME values actually is much larger,\nso HOUR can return values greater than 23.\n\nThe return value is always positive, even if a negative TIME value is provided.\n\nExamples\n--------\n\nSELECT HOUR(\'10:05:03\');\n+------------------+\n| HOUR(\'10:05:03\') |\n+------------------+\n|               10 |\n+------------------+\n\nSELECT HOUR(\'272:59:59\');\n+-------------------+\n| HOUR(\'272:59:59\') |\n+-------------------+\n|               272 |\n+-------------------+\n\nDifference between EXTRACT (HOUR FROM ...) (>= MariaDB 10.0.7 and MariaDB\n5.5.35) and HOUR:\n\nSELECT EXTRACT(HOUR FROM \'26:30:00\'), HOUR(\'26:30:00\');\n+-------------------------------+------------------+\n| EXTRACT(HOUR FROM \'26:30:00\') | HOUR(\'26:30:00\') |\n+-------------------------------+------------------+\n|                             2 |               26 |\n+-------------------------------+------------------+\n\nURL: https://mariadb.com/kb/en/hour/','','https://mariadb.com/kb/en/hour/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (531,31,'LAST_DAY','Syntax\n------\n\nLAST_DAY(date)\n\nDescription\n-----------\n\nTakes a date or datetime value and returns the corresponding value for the\nlast day of the month. Returns NULL if the argument is invalid.\n\nExamples\n--------\n\nSELECT LAST_DAY(\'2003-02-05\');\n+------------------------+\n| LAST_DAY(\'2003-02-05\') |\n+------------------------+\n| 2003-02-28             |\n+------------------------+\n\nSELECT LAST_DAY(\'2004-02-05\');\n+------------------------+\n| LAST_DAY(\'2004-02-05\') |\n+------------------------+\n| 2004-02-29             |\n+------------------------+\n\nSELECT LAST_DAY(\'2004-01-01 01:01:01\');\n+---------------------------------+\n| LAST_DAY(\'2004-01-01 01:01:01\') |\n+---------------------------------+\n| 2004-01-31                      |\n+---------------------------------+\n\nSELECT LAST_DAY(\'2003-03-32\');\n+------------------------+\n| LAST_DAY(\'2003-03-32\') |\n+------------------------+\n| NULL                   |\n+------------------------+\n1 row in set, 1 warning (0.00 sec)\n\nWarning (Code 1292): Incorrect datetime value: \'2003-03-32\'\n\nURL: https://mariadb.com/kb/en/last_day/','','https://mariadb.com/kb/en/last_day/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (532,31,'LOCALTIME','Syntax\n------\n\nLOCALTIME\nLOCALTIME([precision])\n\nDescription\n-----------\n\nLOCALTIME and LOCALTIME() are synonyms for NOW().\n\nURL: https://mariadb.com/kb/en/localtime/','','https://mariadb.com/kb/en/localtime/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (533,31,'LOCALTIMESTAMP','Syntax\n------\n\nLOCALTIMESTAMP\nLOCALTIMESTAMP([precision])\n\nDescription\n-----------\n\nLOCALTIMESTAMP and LOCALTIMESTAMP() are synonyms for NOW().\n\nURL: https://mariadb.com/kb/en/localtimestamp/','','https://mariadb.com/kb/en/localtimestamp/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (534,31,'MAKEDATE','Syntax\n------\n\nMAKEDATE(year,dayofyear)\n\nDescription\n-----------\n\nReturns a date, given year and day-of-year values. dayofyear must be greater\nthan 0 or the result is NULL.\n\nExamples\n--------\n\nSELECT MAKEDATE(2011,31), MAKEDATE(2011,32);\n+-------------------+-------------------+\n| MAKEDATE(2011,31) | MAKEDATE(2011,32) |\n+-------------------+-------------------+\n| 2011-01-31        | 2011-02-01        |\n+-------------------+-------------------+\n\nSELECT MAKEDATE(2011,365), MAKEDATE(2014,365);\n+--------------------+--------------------+\n| MAKEDATE(2011,365) | MAKEDATE(2014,365) |\n+--------------------+--------------------+\n| 2011-12-31         | 2014-12-31         |\n+--------------------+--------------------+\n\nSELECT MAKEDATE(2011,0);\n+------------------+\n| MAKEDATE(2011,0) |\n+------------------+\n| NULL             |\n+------------------+\n\nURL: https://mariadb.com/kb/en/makedate/','','https://mariadb.com/kb/en/makedate/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (535,31,'MAKETIME','Syntax\n------\n\nMAKETIME(hour,minute,second)\n\nDescription\n-----------\n\nReturns a time value calculated from the hour, minute, and second arguments.\n\nIf minute or second are out of the range 0 to 60, NULL is returned. The hour\ncan be in the range -838 to 838, outside of which the value is truncated with\na warning.\n\nExamples\n--------\n\nSELECT MAKETIME(13,57,33);\n+--------------------+\n| MAKETIME(13,57,33) |\n+--------------------+\n| 13:57:33           |\n+--------------------+\n\nSELECT MAKETIME(-13,57,33);\n+---------------------+\n| MAKETIME(-13,57,33) |\n+---------------------+\n| -13:57:33           |\n+---------------------+\n\nSELECT MAKETIME(13,67,33);\n+--------------------+\n| MAKETIME(13,67,33) |\n+--------------------+\n| NULL               |\n+--------------------+\n\nSELECT MAKETIME(-1000,57,33);\n+-----------------------+\n| MAKETIME(-1000,57,33) |\n+-----------------------+\n| -838:59:59            |\n+-----------------------+\n1 row in set, 1 warning (0.00 sec)\n\nSHOW WARNINGS;\n+---------+------+-----------------------------------------------+\n| Level   | Code | Message                                       |\n+---------+------+-----------------------------------------------+\n| Warning | 1292 | Truncated incorrect time value: \'-1000:57:33\' |\n+---------+------+-----------------------------------------------+\n\nURL: https://mariadb.com/kb/en/maketime/','','https://mariadb.com/kb/en/maketime/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (536,31,'MICROSECOND','Syntax\n------\n\nMICROSECOND(expr)\n\nDescription\n-----------\n\nReturns the microseconds from the time or datetime expression expr as a number\nin the range from 0 to 999999.\n\nIf expr is a time with no microseconds, zero is returned, while if expr is a\ndate with no time, zero with a warning is returned.\n\nExamples\n--------\n\nSELECT MICROSECOND(\'12:00:00.123456\');\n+--------------------------------+\n| MICROSECOND(\'12:00:00.123456\') |\n+--------------------------------+\n|                         123456 |\n+--------------------------------+\n\nSELECT MICROSECOND(\'2009-12-31 23:59:59.000010\');\n+-------------------------------------------+\n| MICROSECOND(\'2009-12-31 23:59:59.000010\') |\n+-------------------------------------------+\n|                                        10 |\n+-------------------------------------------+\n\nSELECT MICROSECOND(\'2013-08-07 12:13:14\');\n+------------------------------------+\n| MICROSECOND(\'2013-08-07 12:13:14\') |\n+------------------------------------+\n|                                  0 |\n+------------------------------------+\n\nSELECT MICROSECOND(\'2013-08-07\');\n+---------------------------+\n| MICROSECOND(\'2013-08-07\') |\n+---------------------------+\n|                         0 |\n+---------------------------+\n1 row in set, 1 warning (0.00 sec)\n\nSHOW WARNINGS;\n+---------+------+----------------------------------------------+\n| Level   | Code | Message                                      |\n+---------+------+----------------------------------------------+\n| Warning | 1292 | Truncated incorrect time value: \'2013-08-07\' |\n+---------+------+----------------------------------------------+\n\nURL: https://mariadb.com/kb/en/microsecond/','','https://mariadb.com/kb/en/microsecond/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (537,31,'MINUTE','Syntax\n------\n\nMINUTE(time)\n\nDescription\n-----------\n\nReturns the minute for time, in the range 0 to 59.\n\nExamples\n--------\n\nSELECT MINUTE(\'2013-08-03 11:04:03\');\n+-------------------------------+\n| MINUTE(\'2013-08-03 11:04:03\') |\n+-------------------------------+\n|                             4 |\n+-------------------------------+\n\nSELECT MINUTE (\'23:12:50\');\n+---------------------+\n| MINUTE (\'23:12:50\') |\n+---------------------+\n|                  12 |\n+---------------------+\n\nURL: https://mariadb.com/kb/en/minute/','','https://mariadb.com/kb/en/minute/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (538,31,'MONTH','Syntax\n------\n\nMONTH(date)\n\nDescription\n-----------\n\nReturns the month for date in the range 1 to 12 for January to December, or 0\nfor dates such as \'0000-00-00\' or \'2008-00-00\' that have a zero month part.\n\nExamples\n--------\n\nSELECT MONTH(\'2019-01-03\');\n+---------------------+\n| MONTH(\'2019-01-03\') |\n+---------------------+\n|                   1 |\n+---------------------+\n\nSELECT MONTH(\'2019-00-03\');\n+---------------------+\n| MONTH(\'2019-00-03\') |\n+---------------------+\n|                   0 |\n+---------------------+\n\nURL: https://mariadb.com/kb/en/month/','','https://mariadb.com/kb/en/month/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (539,31,'MONTHNAME','Syntax\n------\n\nMONTHNAME(date)\n\nDescription\n-----------\n\nReturns the full name of the month for date. The language used for the name is\ncontrolled by the value of the lc_time_names system variable. See server\nlocale for more on the supported locales.\n\nExamples\n--------\n\nSELECT MONTHNAME(\'2019-02-03\');\n+-------------------------+\n| MONTHNAME(\'2019-02-03\') |\n+-------------------------+\n| February                |\n+-------------------------+\n\nChanging the locale:\n\nSET lc_time_names = \'fr_CA\';\n\nSELECT MONTHNAME(\'2019-05-21\');\n+-------------------------+\n| MONTHNAME(\'2019-05-21\') |\n+-------------------------+\n| mai                     |\n+-------------------------+\n\nURL: https://mariadb.com/kb/en/monthname/','','https://mariadb.com/kb/en/monthname/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (540,31,'NOW','Syntax\n------\n\nNOW([precision])\nCURRENT_TIMESTAMP\nCURRENT_TIMESTAMP([precision])\nLOCALTIME, LOCALTIME([precision])\nLOCALTIMESTAMP\nLOCALTIMESTAMP([precision])\n\nDescription\n-----------\n\nReturns the current date and time as a value in \'YYYY-MM-DD HH:MM:SS\' or\nYYYYMMDDHHMMSS.uuuuuu format, depending on whether the function is used in a\nstring or numeric context. The value is expressed in the current time zone.\n\nThe optional precision determines the microsecond precision. See Microseconds\nin MariaDB.\n\nNOW() (or its synonyms) can be used as the default value for TIMESTAMP columns\nas well as, since MariaDB 10.0.1, DATETIME columns. Before MariaDB 10.0.1, it\nwas only possible for a single TIMESTAMP column per table to contain the\nCURRENT_TIMESTAMP as its default.\n\nWhen displayed in the INFORMATION_SCHEMA.COLUMNS table, a default CURRENT\nTIMESTAMP is displayed as CURRENT_TIMESTAMP up until MariaDB 10.2.2, and as\ncurrent_timestamp() from MariaDB 10.2.3, due to to MariaDB 10.2 accepting\nexpressions in the DEFAULT clause.\n\nChanging the timestamp system variable with a SET timestamp statement affects\nthe value returned by NOW(), but not by SYSDATE().\n\nExamples\n--------\n\nSELECT NOW();\n+---------------------+\n| NOW()               |\n+---------------------+\n| 2010-03-27 13:13:25 |\n+---------------------+\n\nSELECT NOW() + 0;\n+-----------------------+\n| NOW() + 0             |\n+-----------------------+\n| 20100327131329.000000 |\n+-----------------------+\n\nWith precision:\n\nSELECT CURRENT_TIMESTAMP(2);\n+------------------------+\n| CURRENT_TIMESTAMP(2)   |\n+------------------------+\n| 2018-07-10 09:47:26.24 |\n+------------------------+\n\nUsed as a default TIMESTAMP:\n\nCREATE TABLE t (createdTS TIMESTAMP NOT NULL DEFAULT CURRENT_TIMESTAMP);\n\nFrom MariaDB 10.2.2:\n\nSELECT * FROM INFORMATION_SCHEMA.COLUMNS WHERE TABLE_SCHEMA=\'test\'\n AND COLUMN_NAME LIKE \'%ts%\'\\G\n*************************** 1. row ***************************\n     TABLE_CATALOG: def\n      TABLE_SCHEMA: test\n       TABLE_NAME: t\n      COLUMN_NAME: ts\n    ORDINAL_POSITION: 1\n     COLUMN_DEFAULT: current_timestamp()\n...\n\n<= MariaDB 10.2.1\n\nSELECT * FROM INFORMATION_SCHEMA.COLUMNS WHERE TABLE_SCHEMA=\'test\'\n AND COLUMN_NAME LIKE \'%ts%\'\\G\n*************************** 1. row ***************************\n     TABLE_CATALOG: def\n      TABLE_SCHEMA: test\n       TABLE_NAME: t\n      COLUMN_NAME: createdTS\n    ORDINAL_POSITION: 1\n     COLUMN_DEFAULT: CURRENT_TIMESTAMP\n...\n\nURL: https://mariadb.com/kb/en/now/','','https://mariadb.com/kb/en/now/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (541,31,'PERIOD_ADD','Syntax\n------\n\nPERIOD_ADD(P,N)\n\nDescription\n-----------\n\nAdds N months to period P. P is in the format YYMM or YYYYMM, and is not a\ndate value. If P contains a two-digit year, values from 00 to 69 are converted\nto from 2000 to 2069, while values from 70 are converted to 1970 upwards.\n\nReturns a value in the format YYYYMM.\n\nExamples\n--------\n\nSELECT PERIOD_ADD(200801,2);\n+----------------------+\n| PERIOD_ADD(200801,2) |\n+----------------------+\n|               200803 |\n+----------------------+\n\nSELECT PERIOD_ADD(6910,2);\n+--------------------+\n| PERIOD_ADD(6910,2) |\n+--------------------+\n|             206912 |\n+--------------------+\n\nSELECT PERIOD_ADD(7010,2);\n+--------------------+\n| PERIOD_ADD(7010,2) |\n+--------------------+\n|             197012 |\n+--------------------+\n\nURL: https://mariadb.com/kb/en/period_add/','','https://mariadb.com/kb/en/period_add/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (542,31,'PERIOD_DIFF','Syntax\n------\n\nPERIOD_DIFF(P1,P2)\n\nDescription\n-----------\n\nReturns the number of months between periods P1 and P2. P1 and P2 can be in\nthe format YYMM or YYYYMM, and are not date values.\n\nIf P1 or P2 contains a two-digit year, values from 00 to 69 are converted to\nfrom 2000 to 2069, while values from 70 are converted to 1970 upwards.\n\nExamples\n--------\n\nSELECT PERIOD_DIFF(200802,200703);\n+----------------------------+\n| PERIOD_DIFF(200802,200703) |\n+----------------------------+\n|                         11 |\n+----------------------------+\n\nSELECT PERIOD_DIFF(6902,6803);\n+------------------------+\n| PERIOD_DIFF(6902,6803) |\n+------------------------+\n|                     11 |\n+------------------------+\n\nSELECT PERIOD_DIFF(7002,6803);\n+------------------------+\n| PERIOD_DIFF(7002,6803) |\n+------------------------+\n|                  -1177 |\n+------------------------+\n\nURL: https://mariadb.com/kb/en/period_diff/','','https://mariadb.com/kb/en/period_diff/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (543,31,'QUARTER','Syntax\n------\n\nQUARTER(date)\n\nDescription\n-----------\n\nReturns the quarter of the year for date, in the range 1 to 4. Returns 0 if\nmonth contains a zero value, or NULL if the given value is not otherwise a\nvalid date (zero values are accepted).\n\nExamples\n--------\n\nSELECT QUARTER(\'2008-04-01\');\n+-----------------------+\n| QUARTER(\'2008-04-01\') |\n+-----------------------+\n|                     2 |\n+-----------------------+\n\nSELECT QUARTER(\'2019-00-01\');\n+-----------------------+\n| QUARTER(\'2019-00-01\') |\n+-----------------------+\n|                     0 |\n+-----------------------+\n\nURL: https://mariadb.com/kb/en/quarter/','','https://mariadb.com/kb/en/quarter/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (544,31,'SECOND','Syntax\n------\n\nSECOND(time)\n\nDescription\n-----------\n\nReturns the second for a given time (which can include microseconds), in the\nrange 0 to 59, or NULL if not given a valid time value.\n\nExamples\n--------\n\nSELECT SECOND(\'10:05:03\');\n+--------------------+\n| SECOND(\'10:05:03\') |\n+--------------------+\n|                  3 |\n+--------------------+\n\nSELECT SECOND(\'10:05:01.999999\');\n+---------------------------+\n| SECOND(\'10:05:01.999999\') |\n+---------------------------+\n|                         1 |\n+---------------------------+\n\nURL: https://mariadb.com/kb/en/second/','','https://mariadb.com/kb/en/second/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (545,31,'SEC_TO_TIME','Syntax\n------\n\nSEC_TO_TIME(seconds)\n\nDescription\n-----------\n\nReturns the seconds argument, converted to hours, minutes, and seconds, as a\nTIME value. The range of the result is constrained to that of the TIME data\ntype. A warning occurs if the argument corresponds to a value outside that\nrange.\n\nThe time will be returned in the format hh:mm:ss, or hhmmss if used in a\nnumeric calculation.\n\nExamples\n--------\n\nSELECT SEC_TO_TIME(12414);\n+--------------------+\n| SEC_TO_TIME(12414) |\n+--------------------+\n| 03:26:54           |\n+--------------------+\n\nSELECT SEC_TO_TIME(12414)+0;\n+----------------------+\n| SEC_TO_TIME(12414)+0 |\n+----------------------+\n|                32654 |\n+----------------------+\n\nSELECT SEC_TO_TIME(9999999);\n+----------------------+\n| SEC_TO_TIME(9999999) |\n+----------------------+\n| 838:59:59            |\n+----------------------+\n1 row in set, 1 warning (0.00 sec)\n\nSHOW WARNINGS;\n+---------+------+-------------------------------------------+\n| Level   | Code | Message                                   |\n+---------+------+-------------------------------------------+\n| Warning | 1292 | Truncated incorrect time value: \'9999999\' |\n+---------+------+-------------------------------------------+\n\nURL: https://mariadb.com/kb/en/sec_to_time/','','https://mariadb.com/kb/en/sec_to_time/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (546,31,'STR_TO_DATE','Syntax\n------\n\nSTR_TO_DATE(str,format)\n\nDescription\n-----------\n\nThis is the inverse of the DATE_FORMAT() function. It takes a string str and a\nformat string format. STR_TO_DATE() returns a DATETIME value if the format\nstring contains both date and time parts, or a DATE or TIME value if the\nstring contains only date or time parts.\n\nThe date, time, or datetime values contained in str should be given in the\nformat indicated by format. If str contains an illegal date, time, or datetime\nvalue, STR_TO_DATE() returns NULL. An illegal value also produces a warning.\n\nUnder specific SQL_MODE settings an error may also be generated if the str\nisn\'t a valid date:\n\n* ALLOW_INVALID_DATES\n* NO_ZERO_DATE\n* NO_ZERO_IN_DATE\n\nThe options that can be used by STR_TO_DATE(), as well as its inverse\nDATE_FORMAT() and the FROM_UNIXTIME() function, are:\n\n+---------------------------+------------------------------------------------+\n| Option                    | Description                                    |\n+---------------------------+------------------------------------------------+\n| %a                        | Short weekday name in current locale           |\n|                           | (Variable lc_time_names).                      |\n+---------------------------+------------------------------------------------+\n| %b                        | Short form month name in current locale. For   |\n|                           | locale en_US this is one of:                   |\n|                           | Jan,Feb,Mar,Apr,May,Jun,Jul,Aug,Sep,Oct,Nov    |\n|                           | or Dec.                                        |\n+---------------------------+------------------------------------------------+\n| %c                        | Month with 1 or 2 digits.                      |\n+---------------------------+------------------------------------------------+\n| %D                        | Day with English suffix \'th\', \'nd\', \'st\' or    |\n|                           | \'rd\'\'. (1st, 2nd, 3rd...).                     |\n+---------------------------+------------------------------------------------+\n| %d                        | Day with 2 digits.                             |\n+---------------------------+------------------------------------------------+\n| %e                        | Day with 1 or 2 digits.                        |\n+---------------------------+------------------------------------------------+\n| %f                        | Microseconds 6 digits.                         |\n+---------------------------+------------------------------------------------+\n| %H                        | Hour with 2 digits between 00-23.              |\n+---------------------------+------------------------------------------------+\n| %h                        | Hour with 2 digits between 01-12.              |\n+---------------------------+------------------------------------------------+\n| %I                        | Hour with 2 digits between 01-12.              |\n+---------------------------+------------------------------------------------+\n| %i                        | Minute with 2 digits.                          |\n+---------------------------+------------------------------------------------+\n| %j                        | Day of the year (001-366)                      |\n+---------------------------+------------------------------------------------+\n| %k                        | Hour with 1 digits between 0-23.               |\n+---------------------------+------------------------------------------------+\n| %l                        | Hour with 1 digits between 1-12.               |\n+---------------------------+------------------------------------------------+\n| %M                        | Full month name in current locale (Variable    |\n|                           | lc_time_names).                                |\n+---------------------------+------------------------------------------------+\n| %m                        | Month with 2 digits.                           |\n+---------------------------+------------------------------------------------+\n| %p                        | AM/PM according to current locale (Variable    |\n|                           | lc_time_names).                                |\n+---------------------------+------------------------------------------------+\n| %r                        | Time in 12 hour format, followed by AM/PM.     |\n|                           | Short for \'%I:%i:%S %p\'.                       |\n+---------------------------+------------------------------------------------+\n| %S                        | Seconds with 2 digits.                         |\n+---------------------------+------------------------------------------------+\n| %s                        | Seconds with 2 digits.                         |\n+---------------------------+------------------------------------------------+\n| %T                        | Time in 24 hour format. Short for \'%H:%i:%S\'.  |\n+---------------------------+------------------------------------------------+\n| %U                        | Week number (00-53), when first day of the     |\n|                           | week is Sunday.                                |\n+---------------------------+------------------------------------------------+\n| %u                        | Week number (00-53), when first day of the     |\n|                           | week is Monday.                                |\n+---------------------------+------------------------------------------------+\n| %V                        | Week number (01-53), when first day of the     |\n|                           | week is Sunday. Used with %X.                  |\n+---------------------------+------------------------------------------------+\n| %v                        | Week number (01-53), when first day of the     |\n|                           | week is Monday. Used with %x.                  |\n+---------------------------+------------------------------------------------+\n| %W                        | Full weekday name in current locale (Variable  |\n|                           | lc_time_names).                                |\n+---------------------------+------------------------------------------------+\n| %w                        | Day of the week. 0 = Sunday, 6 = Saturday.     |\n+---------------------------+------------------------------------------------+\n| %X                        | Year with 4 digits when first day of the week  |\n|                           | is Sunday. Used with %V.                       |\n+---------------------------+------------------------------------------------+\n| %x                        | Year with 4 digits when first day of the week  |\n|                           | is Monday. Used with %v.                       |\n+---------------------------+------------------------------------------------+\n| %Y                        | Year with 4 digits.                            |\n+---------------------------+------------------------------------------------+\n| %y                        | Year with 2 digits.                            |\n+---------------------------+------------------------------------------------+\n| %#                        | For str_to_date(), skip all numbers.           |\n+---------------------------+------------------------------------------------+\n| %.                        | For str_to_date(), skip all punctation         |\n|                           | characters.                                    |\n+---------------------------+------------------------------------------------+\n| %@                        | For str_to_date(), skip all alpha characters.  |\n+---------------------------+------------------------------------------------+\n| %%                        | A literal % character.                         |\n+---------------------------+------------------------------------------------+\n\nExamples\n--------\n\nSELECT STR_TO_DATE(\'Wednesday, June 2, 2014\', \'%W, %M %e, %Y\');\n+---------------------------------------------------------+\n| STR_TO_DATE(\'Wednesday, June 2, 2014\', \'%W, %M %e, %Y\') |\n+---------------------------------------------------------+\n| 2014-06-02                                              |\n+---------------------------------------------------------+\n\nSELECT STR_TO_DATE(\'Wednesday23423, June 2, 2014\', \'%W, %M %e, %Y\');\n+--------------------------------------------------------------+\n| STR_TO_DATE(\'Wednesday23423, June 2, 2014\', \'%W, %M %e, %Y\') |\n+--------------------------------------------------------------+\n| NULL                                                         |\n+--------------------------------------------------------------+\n1 row in set, 1 warning (0.00 sec)\n\nSHOW WARNINGS;\n+---------+------+-------------------------------------------------------------\n---------------------+\n| Level   | Code | Message                                                    \n           |\n+---------+------+-------------------------------------------------------------\n---------------------+\n| Warning | 1411 | Incorrect datetime value: \'Wednesday23423, June 2, 2014\'\nfor function str_to_date |\n+---------+------+-------------------------------------------------------------\n---------------------+\n\nSELECT STR_TO_DATE(\'Wednesday23423, June 2, 2014\', \'%W%#, %M %e, %Y\');\n+----------------------------------------------------------------+\n| STR_TO_DATE(\'Wednesday23423, June 2, 2014\', \'%W%#, %M %e, %Y\') |\n+----------------------------------------------------------------+\n| 2014-06-02                                                     |\n+----------------------------------------------------------------+\n\nURL: https://mariadb.com/kb/en/str_to_date/','','https://mariadb.com/kb/en/str_to_date/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (547,31,'SUBDATE','Syntax\n------\n\nSUBDATE(date,INTERVAL expr unit), SUBDATE(expr,days)\n\nDescription\n-----------\n\nWhen invoked with the INTERVAL form of the second argument, SUBDATE() is a\nsynonym for DATE_SUB(). See Date and Time Units for a complete list of\npermitted units.\n\nThe second form allows the use of an integer value for days. In such cases, it\nis interpreted as the number of days to be subtracted from the date or\ndatetime expression expr.\n\nExamples\n--------\n\nSELECT DATE_SUB(\'2008-01-02\', INTERVAL 31 DAY);\n+-----------------------------------------+\n| DATE_SUB(\'2008-01-02\', INTERVAL 31 DAY) |\n+-----------------------------------------+\n| 2007-12-02                              |\n+-----------------------------------------+\n\nSELECT SUBDATE(\'2008-01-02\', INTERVAL 31 DAY);\n+----------------------------------------+\n| SUBDATE(\'2008-01-02\', INTERVAL 31 DAY) |\n+----------------------------------------+\n| 2007-12-02                             |\n+----------------------------------------+\n\nSELECT SUBDATE(\'2008-01-02 12:00:00\', 31);\n+------------------------------------+\n| SUBDATE(\'2008-01-02 12:00:00\', 31) |\n+------------------------------------+\n| 2007-12-02 12:00:00                |\n+------------------------------------+\n\nCREATE TABLE t1 (d DATETIME);\nINSERT INTO t1 VALUES\n  (\"2007-01-30 21:31:07\"),\n  (\"1983-10-15 06:42:51\"),\n  (\"2011-04-21 12:34:56\"),\n  (\"2011-10-30 06:31:41\"),\n  (\"2011-01-30 14:03:25\"),\n  (\"2004-10-07 11:19:34\");\n\nSELECT d, SUBDATE(d, 10) from t1;\n+---------------------+---------------------+\n| d                   | SUBDATE(d, 10)      |\n+---------------------+---------------------+\n| 2007-01-30 21:31:07 | 2007-01-20 21:31:07 |\n| 1983-10-15 06:42:51 | 1983-10-05 06:42:51 |\n| 2011-04-21 12:34:56 | 2011-04-11 12:34:56 |\n| 2011-10-30 06:31:41 | 2011-10-20 06:31:41 |\n| 2011-01-30 14:03:25 | 2011-01-20 14:03:25 |\n| 2004-10-07 11:19:34 | 2004-09-27 11:19:34 |\n+---------------------+---------------------+\n\nSELECT d, SUBDATE(d, INTERVAL 10 MINUTE) from t1;\n+---------------------+--------------------------------+\n| d                   | SUBDATE(d, INTERVAL 10 MINUTE) |\n+---------------------+--------------------------------+\n| 2007-01-30 21:31:07 | 2007-01-30 21:21:07            |\n| 1983-10-15 06:42:51 | 1983-10-15 06:32:51            |\n| 2011-04-21 12:34:56 | 2011-04-21 12:24:56            |\n| 2011-10-30 06:31:41 | 2011-10-30 06:21:41            |\n| 2011-01-30 14:03:25 | 2011-01-30 13:53:25            |\n| 2004-10-07 11:19:34 | 2004-10-07 11:09:34            |\n+---------------------+--------------------------------+\n\nURL: https://mariadb.com/kb/en/subdate/','','https://mariadb.com/kb/en/subdate/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (548,31,'SUBTIME','Syntax\n------\n\nSUBTIME(expr1,expr2)\n\nDescription\n-----------\n\nSUBTIME() returns expr1 - expr2 expressed as a value in the same format as\nexpr1. expr1 is a time or datetime expression, and expr2 is a time expression.\n\nExamples\n--------\n\nSELECT SUBTIME(\'2007-12-31 23:59:59.999999\',\'1 1:1:1.000002\');\n+--------------------------------------------------------+\n| SUBTIME(\'2007-12-31 23:59:59.999999\',\'1 1:1:1.000002\') |\n+--------------------------------------------------------+\n| 2007-12-30 22:58:58.999997                             |\n+--------------------------------------------------------+\n\nSELECT SUBTIME(\'01:00:00.999999\', \'02:00:00.999998\');\n+-----------------------------------------------+\n| SUBTIME(\'01:00:00.999999\', \'02:00:00.999998\') |\n+-----------------------------------------------+\n| -00:59:59.999999                              |\n+-----------------------------------------------+\n\nURL: https://mariadb.com/kb/en/subtime/','','https://mariadb.com/kb/en/subtime/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (549,31,'SYSDATE','Syntax\n------\n\nSYSDATE([precision])\n\nDescription\n-----------\n\nReturns the current date and time as a value in \'YYYY-MM-DD HH:MM:SS\' or\nYYYYMMDDHHMMSS.uuuuuu format, depending on whether the function is used in a\nstring or numeric context.\n\nThe optional precision determines the microsecond precision. See Microseconds\nin MariaDB.\n\nSYSDATE() returns the time at which it executes. This differs from the\nbehavior for NOW(), which returns a constant time that indicates the time at\nwhich the statement began to execute. (Within a stored routine or trigger,\nNOW() returns the time at which the routine or triggering statement began to\nexecute.)\n\nIn addition, changing the timestamp system variable with a SET timestamp\nstatement affects the value returned by NOW() but not by SYSDATE(). This means\nthat timestamp settings in the binary log have no effect on invocations of\nSYSDATE().\n\nBecause SYSDATE() can return different values even within the same statement,\nand is not affected by SET TIMESTAMP, it is non-deterministic and therefore\nunsafe for replication if statement-based binary logging is used. If that is a\nproblem, you can use row-based logging, or start the server with the mysqld\noption --sysdate-is-now to cause SYSDATE() to be an alias for NOW(). The\nnon-deterministic nature of SYSDATE() also means that indexes cannot be used\nfor evaluating expressions that refer to it, and that statements using the\nSYSDATE() function are unsafe for statement-based replication.\n\nExamples\n--------\n\nDifference between NOW() and SYSDATE():\n\nSELECT NOW(), SLEEP(2), NOW();\n+---------------------+----------+---------------------+\n| NOW()               | SLEEP(2) | NOW()               |\n+---------------------+----------+---------------------+\n| 2010-03-27 13:23:40 |        0 | 2010-03-27 13:23:40 |\n+---------------------+----------+---------------------+\n\nSELECT SYSDATE(), SLEEP(2), SYSDATE();\n+---------------------+----------+---------------------+\n| SYSDATE()           | SLEEP(2) | SYSDATE()           |\n+---------------------+----------+---------------------+\n| 2010-03-27 13:23:52 |        0 | 2010-03-27 13:23:54 |\n+---------------------+----------+---------------------+\n\nWith precision:\n\nSELECT SYSDATE(4);\n+--------------------------+\n| SYSDATE(4)               |\n+--------------------------+\n| 2018-07-10 10:17:13.1689 |\n+--------------------------+\n\nURL: https://mariadb.com/kb/en/sysdate/','','https://mariadb.com/kb/en/sysdate/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (550,31,'TIME Function','Syntax\n------\n\nTIME(expr)\n\nDescription\n-----------\n\nExtracts the time part of the time or datetime expression expr and returns it\nas a string.\n\nExamples\n--------\n\nSELECT TIME(\'2003-12-31 01:02:03\');\n+-----------------------------+\n| TIME(\'2003-12-31 01:02:03\') |\n+-----------------------------+\n| 01:02:03                    |\n+-----------------------------+\n\nSELECT TIME(\'2003-12-31 01:02:03.000123\');\n+------------------------------------+\n| TIME(\'2003-12-31 01:02:03.000123\') |\n+------------------------------------+\n| 01:02:03.000123                    |\n+------------------------------------+\n\nURL: https://mariadb.com/kb/en/time-function/','','https://mariadb.com/kb/en/time-function/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (551,31,'TIMEDIFF','Syntax\n------\n\nTIMEDIFF(expr1,expr2)\n\nDescription\n-----------\n\nTIMEDIFF() returns expr1 - expr2 expressed as a time value. expr1 and expr2\nare time or date-and-time expressions, but both must be of the same type.\n\nExamples\n--------\n\nSELECT TIMEDIFF(\'2000:01:01 00:00:00\', \'2000:01:01 00:00:00.000001\');\n+---------------------------------------------------------------+\n| TIMEDIFF(\'2000:01:01 00:00:00\', \'2000:01:01 00:00:00.000001\') |\n+---------------------------------------------------------------+\n| -00:00:00.000001                                              |\n+---------------------------------------------------------------+\n\nSELECT TIMEDIFF(\'2008-12-31 23:59:59.000001\', \'2008-12-30 01:01:01.000002\');\n+----------------------------------------------------------------------+\n| TIMEDIFF(\'2008-12-31 23:59:59.000001\', \'2008-12-30 01:01:01.000002\') |\n+----------------------------------------------------------------------+\n| 46:58:57.999999                                                      |\n+----------------------------------------------------------------------+\n\nURL: https://mariadb.com/kb/en/timediff/','','https://mariadb.com/kb/en/timediff/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (552,31,'TIMESTAMP FUNCTION','Syntax\n------\n\nTIMESTAMP(expr), TIMESTAMP(expr1,expr2)\n\nDescription\n-----------\n\nWith a single argument, this function returns the date or datetime expression\nexpr as a datetime value. With two arguments, it adds the time expression\nexpr2 to the date or datetime expression expr1 and returns the result as a\ndatetime value.\n\nExamples\n--------\n\nSELECT TIMESTAMP(\'2003-12-31\');\n+-------------------------+\n| TIMESTAMP(\'2003-12-31\') |\n+-------------------------+\n| 2003-12-31 00:00:00     |\n+-------------------------+\n\nSELECT TIMESTAMP(\'2003-12-31 12:00:00\',\'6:30:00\');\n+--------------------------------------------+\n| TIMESTAMP(\'2003-12-31 12:00:00\',\'6:30:00\') |\n+--------------------------------------------+\n| 2003-12-31 18:30:00                        |\n+--------------------------------------------+\n\nURL: https://mariadb.com/kb/en/timestamp-function/','','https://mariadb.com/kb/en/timestamp-function/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (553,31,'TIMESTAMPADD','Syntax\n------\n\nTIMESTAMPADD(unit,interval,datetime_expr)\n\nDescription\n-----------\n\nAdds the integer expression interval to the date or datetime expression\ndatetime_expr. The unit for interval is given by the unit argument, which\nshould be one of the following values: MICROSECOND, SECOND, MINUTE, HOUR, DAY,\nWEEK, MONTH, QUARTER, or YEAR.\n\nThe unit value may be specified using one of keywords as shown, or with a\nprefix of SQL_TSI_. For example, DAY and SQL_TSI_DAY both are legal.\n\nBefore MariaDB 5.5, FRAC_SECOND was permitted as a synonym for MICROSECOND.\n\nExamples\n--------\n\nSELECT TIMESTAMPADD(MINUTE,1,\'2003-01-02\');\n+-------------------------------------+\n| TIMESTAMPADD(MINUTE,1,\'2003-01-02\') |\n+-------------------------------------+\n| 2003-01-02 00:01:00                 |\n+-------------------------------------+\n\nSELECT TIMESTAMPADD(WEEK,1,\'2003-01-02\');\n+-----------------------------------+\n| TIMESTAMPADD(WEEK,1,\'2003-01-02\') |\n+-----------------------------------+\n| 2003-01-09                        |\n+-----------------------------------+\n\nURL: https://mariadb.com/kb/en/timestampadd/','','https://mariadb.com/kb/en/timestampadd/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (554,31,'TIMESTAMPDIFF','Syntax\n------\n\nTIMESTAMPDIFF(unit,datetime_expr1,datetime_expr2)\n\nDescription\n-----------\n\nReturns datetime_expr2 - datetime_expr1, where datetime_expr1 and\ndatetime_expr2 are date or datetime expressions. One expression may be a date\nand the other a datetime; a date value is treated as a datetime having the\ntime part \'00:00:00\' where necessary. The unit for the result (an integer) is\ngiven by the unit argument. The legal values for unit are the same as those\nlisted in the description of the TIMESTAMPADD() function, i.e MICROSECOND,\nSECOND, MINUTE, HOUR, DAY, WEEK, MONTH, QUARTER, or YEAR.\n\nTIMESTAMPDIFF can also be used to calculate age.\n\nExamples\n--------\n\nSELECT TIMESTAMPDIFF(MONTH,\'2003-02-01\',\'2003-05-01\');\n+------------------------------------------------+\n| TIMESTAMPDIFF(MONTH,\'2003-02-01\',\'2003-05-01\') |\n+------------------------------------------------+\n|                                              3 |\n+------------------------------------------------+\n\nSELECT TIMESTAMPDIFF(YEAR,\'2002-05-01\',\'2001-01-01\');\n+-----------------------------------------------+\n| TIMESTAMPDIFF(YEAR,\'2002-05-01\',\'2001-01-01\') |\n+-----------------------------------------------+\n|                                            -1 |\n+-----------------------------------------------+\n\nSELECT TIMESTAMPDIFF(MINUTE,\'2003-02-01\',\'2003-05-01 12:05:55\');\n+----------------------------------------------------------+\n| TIMESTAMPDIFF(MINUTE,\'2003-02-01\',\'2003-05-01 12:05:55\') |\n+----------------------------------------------------------+\n|                                                   128885 |\n+----------------------------------------------------------+\n\nCalculating age:\n\nSELECT CURDATE();\n+------------+\n| CURDATE()  |\n+------------+\n| 2019-05-27 |\n+------------+\n\nSELECT TIMESTAMPDIFF(YEAR, \'1971-06-06\', CURDATE()) AS age;\n+------+\n| age  |\n+------+\n|   47 |\n+------+\n\nSELECT TIMESTAMPDIFF(YEAR, \'1971-05-06\', CURDATE()) AS age;\n+------+\n| age  |\n+------+\n|   48 |\n+------+\n\nAge as of 2014-08-02:\n\nSELECT name, date_of_birth, TIMESTAMPDIFF(YEAR,date_of_birth,\'2014-08-02\') AS\nage \n FROM student_details;\n+---------+---------------+------+\n| name    | date_of_birth | age  |\n+---------+---------------+------+\n| Chun    | 1993-12-31    |   20 |\n| Esben   | 1946-01-01    |   68 |\n| Kaolin  | 1996-07-16    |   18 |\n| Tatiana | 1988-04-13    |   26 |\n+---------+---------------+------+\n\nURL: https://mariadb.com/kb/en/timestampdiff/','','https://mariadb.com/kb/en/timestampdiff/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (555,31,'TIME_FORMAT','Syntax\n------\n\nTIME_FORMAT(time,format)\n\nDescription\n-----------\n\nThis is used like the DATE_FORMAT() function, but the format string may\ncontain format specifiers only for hours, minutes, and seconds. Other\nspecifiers produce a NULL value or 0.\n\nExamples\n--------\n\nSELECT TIME_FORMAT(\'100:00:00\', \'%H %k %h %I %l\');\n+--------------------------------------------+\n| TIME_FORMAT(\'100:00:00\', \'%H %k %h %I %l\') |\n+--------------------------------------------+\n| 100 100 04 04 4                            |\n+--------------------------------------------+\n\nURL: https://mariadb.com/kb/en/time_format/','','https://mariadb.com/kb/en/time_format/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (556,31,'TIME_TO_SEC','Syntax\n------\n\nTIME_TO_SEC(time)\n\nDescription\n-----------\n\nReturns the time argument, converted to seconds.\n\nThe value returned by TIME_TO_SEC is of type DOUBLE. Before MariaDB 5.3 (and\nMySQL 5.6), the type was INT. The returned value preserves microseconds of the\nargument. See also Microseconds in MariaDB.\n\nExamples\n--------\n\nSELECT TIME_TO_SEC(\'22:23:00\');\n+-------------------------+\n| TIME_TO_SEC(\'22:23:00\') |\n+-------------------------+\n|                   80580 |\n+-------------------------+\n\nSELECT TIME_TO_SEC(\'00:39:38\');\n+-------------------------+\n| TIME_TO_SEC(\'00:39:38\') |\n+-------------------------+\n|                    2378 |\n+-------------------------+\n\nSELECT TIME_TO_SEC(\'09:12:55.2355\');\n+------------------------------+\n| TIME_TO_SEC(\'09:12:55.2355\') |\n+------------------------------+\n|                   33175.2355 |\n+------------------------------+\n1 row in set (0.000 sec)\n\nURL: https://mariadb.com/kb/en/time_to_sec/','','https://mariadb.com/kb/en/time_to_sec/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (557,31,'TO_DAYS','Syntax\n------\n\nTO_DAYS(date)\n\nDescription\n-----------\n\nGiven a date date, returns the number of days since the start of the current\ncalendar (0000-00-00).\n\nThe function is not designed for use with dates before the advent of the\nGregorian calendar in October 1582. Results will not be reliable since it\ndoesn\'t account for the lost days when the calendar changed from the Julian\ncalendar.\n\nThis is the converse of the FROM_DAYS() function.\n\nExamples\n--------\n\nSELECT TO_DAYS(\'2007-10-07\');\n+-----------------------+\n| TO_DAYS(\'2007-10-07\') |\n+-----------------------+\n|                733321 |\n+-----------------------+\n\nSELECT TO_DAYS(\'0000-01-01\');\n+-----------------------+\n| TO_DAYS(\'0000-01-01\') |\n+-----------------------+\n|                     1 |\n+-----------------------+\n\nSELECT TO_DAYS(950501);\n+-----------------+\n| TO_DAYS(950501) |\n+-----------------+\n|          728779 |\n+-----------------+\n\nURL: https://mariadb.com/kb/en/to_days/','','https://mariadb.com/kb/en/to_days/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (558,31,'TO_SECONDS','Syntax\n------\n\nTO_SECONDS(expr)\n\nDescription\n-----------\n\nReturns the number of seconds from year 0 till expr, or NULL if expr is not a\nvalid date or datetime.\n\nExamples\n--------\n\nSELECT TO_SECONDS(\'2013-06-13\');\n+--------------------------+\n| TO_SECONDS(\'2013-06-13\') |\n+--------------------------+\n|              63538300800 |\n+--------------------------+\n\nSELECT TO_SECONDS(\'2013-06-13 21:45:13\');\n+-----------------------------------+\n| TO_SECONDS(\'2013-06-13 21:45:13\') |\n+-----------------------------------+\n|                       63538379113 |\n+-----------------------------------+\n\nSELECT TO_SECONDS(NOW());\n+-------------------+\n| TO_SECONDS(NOW()) |\n+-------------------+\n|       63543530875 |\n+-------------------+\n\nSELECT TO_SECONDS(20130513);\n+----------------------+\n| TO_SECONDS(20130513) |\n+----------------------+\n|          63535622400 |\n+----------------------+\n1 row in set (0.00 sec)\n\nSELECT TO_SECONDS(130513);\n+--------------------+\n| TO_SECONDS(130513) |\n+--------------------+\n|        63535622400 |\n+--------------------+\n\nURL: https://mariadb.com/kb/en/to_seconds/','','https://mariadb.com/kb/en/to_seconds/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (559,31,'UNIX_TIMESTAMP','Syntax\n------\n\nUNIX_TIMESTAMP()\nUNIX_TIMESTAMP(date)\n\nDescription\n-----------\n\nIf called with no argument, returns a Unix timestamp (seconds since\n\'1970-01-01 00:00:00\' UTC) as an unsigned integer. If UNIX_TIMESTAMP() is\ncalled with a date argument, it returns the value of the argument as seconds\nsince \'1970-01-01 00:00:00\' UTC. date may be a DATE string, a DATETIME string,\na TIMESTAMP, or a number in the format YYMMDD or YYYYMMDD. The server\ninterprets date as a value in the current time zone and converts it to an\ninternal value in UTC. Clients can set their time zone as described in time\nzones.\n\nThe inverse function of UNIX_TIMESTAMP() is FROM_UNIXTIME()\n\nUNIX_TIMESTAMP() supports microseconds.\n\nTimestamps in MariaDB have a maximum value of 2147483647, equivalent to\n2038-01-19 05:14:07. This is due to the underlying 32-bit limitation. Using\nthe function on a date beyond this will result in NULL being returned. Use\nDATETIME as a storage type if you require dates beyond this.\n\nError Handling\n--------------\n\nReturns NULL for wrong arguments to UNIX_TIMESTAMP(). In MySQL and MariaDB\nbefore 5.3 wrong arguments to UNIX_TIMESTAMP() returned 0.\n\nCompatibility\n-------------\n\nAs you can see in the examples above, UNIX_TIMESTAMP(constant-date-string)\nreturns a timestamp with 6 decimals while MariaDB 5.2 and before returns it\nwithout decimals. This can cause a problem if you are using UNIX_TIMESTAMP()\nas a partitioning function. You can fix this by using\nFLOOR(UNIX_TIMESTAMP(..)) or changing the date string to a date number, like\n20080101000000.\n\nExamples\n--------\n\nSELECT UNIX_TIMESTAMP();\n+------------------+\n| UNIX_TIMESTAMP() |\n+------------------+\n|       1269711082 |\n+------------------+\n\nSELECT UNIX_TIMESTAMP(\'2007-11-30 10:30:19\');\n+---------------------------------------+\n| UNIX_TIMESTAMP(\'2007-11-30 10:30:19\') |\n+---------------------------------------+\n|                     1196436619.000000 |\n+---------------------------------------+\n\nSELECT UNIX_TIMESTAMP(\"2007-11-30 10:30:19.123456\");\n+----------------------------------------------+\n| unix_timestamp(\"2007-11-30 10:30:19.123456\") |\n+----------------------------------------------+\n|                            1196411419.123456 |\n+----------------------------------------------+\n\nSELECT FROM_UNIXTIME(UNIX_TIMESTAMP(\'2007-11-30 10:30:19\'));\n+------------------------------------------------------+\n| FROM_UNIXTIME(UNIX_TIMESTAMP(\'2007-11-30 10:30:19\')) |\n+------------------------------------------------------+\n| 2007-11-30 10:30:19.000000                           |\n+------------------------------------------------------+\n\nSELECT FROM_UNIXTIME(FLOOR(UNIX_TIMESTAMP(\'2007-11-30 10:30:19\')));\n+-------------------------------------------------------------+\n| FROM_UNIXTIME(FLOOR(UNIX_TIMESTAMP(\'2007-11-30 10:30:19\'))) |\n+-------------------------------------------------------------+\n| 2007-11-30 10:30:19                                         |\n+-------------------------------------------------------------+\n\nURL: https://mariadb.com/kb/en/unix_timestamp/','','https://mariadb.com/kb/en/unix_timestamp/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (560,31,'UTC_DATE','Syntax\n------\n\nUTC_DATE, UTC_DATE()\n\nDescription\n-----------\n\nReturns the current UTC date as a value in \'YYYY-MM-DD\' or YYYYMMDD format,\ndepending on whether the function is used in a string or numeric context.\n\nExamples\n--------\n\nSELECT UTC_DATE(), UTC_DATE() + 0;\n+------------+----------------+\n| UTC_DATE() | UTC_DATE() + 0 |\n+------------+----------------+\n| 2010-03-27 |       20100327 |\n+------------+----------------+\n\nURL: https://mariadb.com/kb/en/utc_date/','','https://mariadb.com/kb/en/utc_date/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (561,31,'UTC_TIME','Syntax\n------\n\nUTC_TIME\nUTC_TIME([precision])\n\nDescription\n-----------\n\nReturns the current UTC time as a value in \'HH:MM:SS\' or HHMMSS.uuuuuu format,\ndepending on whether the function is used in a string or numeric context.\n\nThe optional precision determines the microsecond precision. See Microseconds\nin MariaDB.\n\nExamples\n--------\n\nSELECT UTC_TIME(), UTC_TIME() + 0;\n+------------+----------------+\n| UTC_TIME() | UTC_TIME() + 0 |\n+------------+----------------+\n| 17:32:34   |  173234.000000 |\n+------------+----------------+\n\nWith precision:\n\nSELECT UTC_TIME(5);\n+----------------+\n| UTC_TIME(5)    |\n+----------------+\n| 07:52:50.78369 |\n+----------------+\n\nURL: https://mariadb.com/kb/en/utc_time/','','https://mariadb.com/kb/en/utc_time/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (562,31,'UTC_TIMESTAMP','Syntax\n------\n\nUTC_TIMESTAMP\nUTC_TIMESTAMP([precision])\n\nDescription\n-----------\n\nReturns the current UTC date and time as a value in \'YYYY-MM-DD HH:MM:SS\' or\nYYYYMMDDHHMMSS.uuuuuu format, depending on whether the function is used in a\nstring or numeric context.\n\nThe optional precision determines the microsecond precision. See Microseconds\nin MariaDB.\n\nExamples\n--------\n\nSELECT UTC_TIMESTAMP(), UTC_TIMESTAMP() + 0;\n+---------------------+-----------------------+\n| UTC_TIMESTAMP()     | UTC_TIMESTAMP() + 0   |\n+---------------------+-----------------------+\n| 2010-03-27 17:33:16 | 20100327173316.000000 |\n+---------------------+-----------------------+\n\nWith precision:\n\nSELECT UTC_TIMESTAMP(4);\n+--------------------------+\n| UTC_TIMESTAMP(4)         |\n+--------------------------+\n| 2018-07-10 07:51:09.1019 |\n+--------------------------+\n\nURL: https://mariadb.com/kb/en/utc_timestamp/','','https://mariadb.com/kb/en/utc_timestamp/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (563,31,'WEEK','Syntax\n------\n\nWEEK(date[,mode])\n\nDescription\n-----------\n\nThis function returns the week number for date. The two-argument form of\nWEEK() allows you to specify whether the week starts on Sunday or Monday and\nwhether the return value should be in the range from 0 to 53 or from 1 to 53.\nIf the mode argument is omitted, the value of the default_week_format system\nvariable is used.\n\nModes\n-----\n\n+-------+---------------------+--------+------------------------------------+\n| Mode  | 1st day of week     | Range  | Week 1 is the 1st week with        |\n+-------+---------------------+--------+------------------------------------+\n| 0     | Sunday              | 0-53   | a Sunday in this year              |\n+-------+---------------------+--------+------------------------------------+\n| 1     | Monday              | 0-53   | more than 3 days this year         |\n+-------+---------------------+--------+------------------------------------+\n| 2     | Sunday              | 1-53   | a Sunday in this year              |\n+-------+---------------------+--------+------------------------------------+\n| 3     | Monday              | 1-53   | more than 3 days this year         |\n+-------+---------------------+--------+------------------------------------+\n| 4     | Sunday              | 0-53   | more than 3 days this year         |\n+-------+---------------------+--------+------------------------------------+\n| 5     | Monday              | 0-53   | a Monday in this year              |\n+-------+---------------------+--------+------------------------------------+\n| 6     | Sunday              | 1-53   | more than 3 days this year         |\n+-------+---------------------+--------+------------------------------------+\n| 7     | Monday              | 1-53   | a Monday in this year              |\n+-------+---------------------+--------+------------------------------------+\n\nWith the mode value of 3, which means \'more than 3 days this year\', weeks are\nnumbered according to ISO 8601:1988.\n\nExamples\n--------\n\nSELECT WEEK(\'2008-02-20\');\n+--------------------+\n| WEEK(\'2008-02-20\') |\n+--------------------+\n|                  7 |\n+--------------------+\n\nSELECT WEEK(\'2008-02-20\',0);\n+----------------------+\n| WEEK(\'2008-02-20\',0) |\n+----------------------+\n|                    7 |\n+----------------------+\n\nSELECT WEEK(\'2008-02-20\',1);\n+----------------------+\n| WEEK(\'2008-02-20\',1) |\n+----------------------+\n|                    8 |\n+----------------------+\n\nSELECT WEEK(\'2008-12-31\',0);\n+----------------------+\n| WEEK(\'2008-12-31\',0) |\n+----------------------+\n|                   52 |\n+----------------------+\n\nSELECT WEEK(\'2008-12-31\',1);\n+----------------------+\n| WEEK(\'2008-12-31\',1) |\n+----------------------+\n|                   53 |\n+----------------------+\n\nSELECT WEEK(\'2019-12-30\',3);\n+----------------------+\n| WEEK(\'2019-12-30\',3) |\n+----------------------+\n|                    1 |\n+----------------------+\n\nCREATE TABLE t1 (d DATETIME);\nINSERT INTO t1 VALUES\n  (\"2007-01-30 21:31:07\"),\n  (\"1983-10-15 06:42:51\"),\n  (\"2011-04-21 12:34:56\"),\n  (\"2011-10-30 06:31:41\"),\n  (\"2011-01-30 14:03:25\"),\n  (\"2004-10-07 11:19:34\");\n\nSELECT d, WEEK(d,0), WEEK(d,1) from t1;\n+---------------------+-----------+-----------+\n| d                   | WEEK(d,0) | WEEK(d,1) |\n+---------------------+-----------+-----------+\n| 2007-01-30 21:31:07 |         4 |         5 |\n| 1983-10-15 06:42:51 |        41 |        41 |\n| 2011-04-21 12:34:56 |        16 |        16 |\n| 2011-10-30 06:31:41 |        44 |        43 |\n| 2011-01-30 14:03:25 |         5 |         4 |\n| 2004-10-07 11:19:34 |        40 |        41 |\n+---------------------+-----------+-----------+\n\nURL: https://mariadb.com/kb/en/week/','','https://mariadb.com/kb/en/week/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (564,31,'WEEKDAY','Syntax\n------\n\nWEEKDAY(date)\n\nDescription\n-----------\n\nReturns the weekday index for date (0 = Monday, 1 = Tuesday, ... 6 = Sunday).\n\nThis contrasts with DAYOFWEEK() which follows the ODBC standard (1 = Sunday, 2\n= Monday, ..., 7 = Saturday).\n\nExamples\n--------\n\nSELECT WEEKDAY(\'2008-02-03 22:23:00\');\n+--------------------------------+\n| WEEKDAY(\'2008-02-03 22:23:00\') |\n+--------------------------------+\n|                              6 |\n+--------------------------------+\n\nSELECT WEEKDAY(\'2007-11-06\');\n+-----------------------+\n| WEEKDAY(\'2007-11-06\') |\n+-----------------------+\n|                     1 |\n+-----------------------+\n\nCREATE TABLE t1 (d DATETIME);\nINSERT INTO t1 VALUES\n  (\"2007-01-30 21:31:07\"),\n  (\"1983-10-15 06:42:51\"),\n  (\"2011-04-21 12:34:56\"),\n  (\"2011-10-30 06:31:41\"),\n  (\"2011-01-30 14:03:25\"),\n  (\"2004-10-07 11:19:34\");\n\nSELECT d FROM t1 where WEEKDAY(d) = 6;\n+---------------------+\n| d                   |\n+---------------------+\n| 2011-10-30 06:31:41 |\n| 2011-01-30 14:03:25 |\n+---------------------+\n\nURL: https://mariadb.com/kb/en/weekday/','','https://mariadb.com/kb/en/weekday/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (565,31,'WEEKOFYEAR','Syntax\n------\n\nWEEKOFYEAR(date)\n\nDescription\n-----------\n\nReturns the calendar week of the date as a number in the range from 1 to 53.\nWEEKOFYEAR() is a compatibility function that is equivalent to WEEK(date,3).\n\nExamples\n--------\n\nSELECT WEEKOFYEAR(\'2008-02-20\');\n+--------------------------+\n| WEEKOFYEAR(\'2008-02-20\') |\n+--------------------------+\n|                        8 |\n+--------------------------+\n\nCREATE TABLE t1 (d DATETIME);\nINSERT INTO t1 VALUES\n  (\"2007-01-30 21:31:07\"),\n  (\"1983-10-15 06:42:51\"),\n  (\"2011-04-21 12:34:56\"),\n  (\"2011-10-30 06:31:41\"),\n  (\"2011-01-30 14:03:25\"),\n  (\"2004-10-07 11:19:34\");\n\nselect * from t1;\n+---------------------+\n| d                   |\n+---------------------+\n| 2007-01-30 21:31:07 |\n| 1983-10-15 06:42:51 |\n| 2011-04-21 12:34:56 |\n| 2011-10-30 06:31:41 |\n| 2011-01-30 14:03:25 |\n| 2004-10-07 11:19:34 |\n+---------------------+\n\nSELECT d, WEEKOFYEAR(d), WEEK(d,3) from t1;\n+---------------------+---------------+-----------+\n| d                   | WEEKOFYEAR(d) | WEEK(d,3) |\n+---------------------+---------------+-----------+\n| 2007-01-30 21:31:07 |             5 |         5 |\n| 1983-10-15 06:42:51 |            41 |        41 |\n| 2011-04-21 12:34:56 |            16 |        16 |\n| 2011-10-30 06:31:41 |            43 |        43 |\n| 2011-01-30 14:03:25 |             4 |         4 |\n| 2004-10-07 11:19:34 |            41 |        41 |\n+---------------------+---------------+-----------+\n\nURL: https://mariadb.com/kb/en/weekofyear/','','https://mariadb.com/kb/en/weekofyear/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (566,31,'YEAR','Syntax\n------\n\nYEAR(date)\n\nDescription\n-----------\n\nReturns the year for the given date, in the range 1000 to 9999, or 0 for the\n\"zero\" date.\n\nExamples\n--------\n\nCREATE TABLE t1 (d DATETIME);\nINSERT INTO t1 VALUES\n  (\"2007-01-30 21:31:07\"),\n  (\"1983-10-15 06:42:51\"),\n  (\"2011-04-21 12:34:56\"),\n  (\"2011-10-30 06:31:41\"),\n  (\"2011-01-30 14:03:25\"),\n  (\"2004-10-07 11:19:34\");\n\nSELECT * FROM t1;\n+---------------------+\n| d                   |\n+---------------------+\n| 2007-01-30 21:31:07 |\n| 1983-10-15 06:42:51 |\n| 2011-04-21 12:34:56 |\n| 2011-10-30 06:31:41 |\n| 2011-01-30 14:03:25 |\n| 2004-10-07 11:19:34 |\n+---------------------+\n\nSELECT * FROM t1 WHERE YEAR(d) = 2011;\n+---------------------+\n| d                   |\n+---------------------+\n| 2011-04-21 12:34:56 |\n| 2011-10-30 06:31:41 |\n| 2011-01-30 14:03:25 |\n+---------------------+\n\nSELECT YEAR(\'1987-01-01\');\n+--------------------+\n| YEAR(\'1987-01-01\') |\n+--------------------+\n|               1987 |\n+--------------------+\n\nURL: https://mariadb.com/kb/en/year/','','https://mariadb.com/kb/en/year/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (567,31,'YEARWEEK','Syntax\n------\n\nYEARWEEK(date), YEARWEEK(date,mode)\n\nDescription\n-----------\n\nReturns year and week for a date. The mode argument works exactly like the\nmode argument to WEEK(). The year in the result may be different from the year\nin the date argument for the first and the last week of the year.\n\nExamples\n--------\n\nSELECT YEARWEEK(\'1987-01-01\');\n+------------------------+\n| YEARWEEK(\'1987-01-01\') |\n+------------------------+\n|                 198652 |\n+------------------------+\n\nCREATE TABLE t1 (d DATETIME);\nINSERT INTO t1 VALUES\n  (\"2007-01-30 21:31:07\"),\n  (\"1983-10-15 06:42:51\"),\n  (\"2011-04-21 12:34:56\"),\n  (\"2011-10-30 06:31:41\"),\n  (\"2011-01-30 14:03:25\"),\n  (\"2004-10-07 11:19:34\");\n\nSELECT * FROM t1;\n+---------------------+\n| d                   |\n+---------------------+\n| 2007-01-30 21:31:07 |\n| 1983-10-15 06:42:51 |\n| 2011-04-21 12:34:56 |\n| 2011-10-30 06:31:41 |\n| 2011-01-30 14:03:25 |\n| 2004-10-07 11:19:34 |\n+---------------------+\n6 rows in set (0.02 sec)\n\nSELECT YEARWEEK(d) FROM t1 WHERE YEAR(d) = 2011;\n+-------------+\n| YEARWEEK(d) |\n+-------------+\n|      201116 |\n|      201144 |\n|      201105 |\n+-------------+\n3 rows in set (0.03 sec)\n\nURL: https://mariadb.com/kb/en/yearweek/','','https://mariadb.com/kb/en/yearweek/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (568,32,'Well-Known Binary (WKB) Format','WKB stands for Well-Known Binary, a format for representing geographical and\ngeometrical data.\n\nWKB uses 1-byte unsigned integers, 4-byte unsigned integers, and 8-byte\ndouble-precision numbers.\n\n* The first byte indicates the byte order. 00 for big endian, or 01 for little\nendian.\n* The next 4 bytes indicate the geometry type. Values from 1 to 7 indicate\nwhether the type is Point, LineString, Polygon, MultiPoint, MultiLineString,\nMultiPolygon, or GeometryCollection respectively. \n* The 8-byte floats represent the co-ordinates.\n\nTake the following example, a sequence of 21 bytes each represented by two hex\ndigits:\n\n000000000140000000000000004010000000000000\n\n* It\'s big endian\n000000000140000000000000004010000000000000\n\n* It\'s a POINT\n000000000140000000000000004010000000000000\n\n* The X co-ordinate is 2.0\n000000000140000000000000004010000000000000\n\n* The Y-co-ordinate is 4.0\n000000000140000000000000004010000000000000\n\nURL: https://mariadb.com/kb/en/well-known-binary-wkb-format/','','https://mariadb.com/kb/en/well-known-binary-wkb-format/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (569,32,'AsBinary','A synonym for ST_AsBinary().\n\nURL: https://mariadb.com/kb/en/wkb-asbinary/','','https://mariadb.com/kb/en/wkb-asbinary/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (570,32,'AsWKB','A synonym for ST_AsBinary().\n\nURL: https://mariadb.com/kb/en/aswkb/','','https://mariadb.com/kb/en/aswkb/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (571,32,'MLineFromWKB','Syntax\n------\n\nMLineFromWKB(wkb[,srid])\nMultiLineStringFromWKB(wkb[,srid])\n\nDescription\n-----------\n\nConstructs a MULTILINESTRING value using its WKB representation and SRID.\n\nMLineFromWKB() and MultiLineStringFromWKB() are synonyms.\n\nExamples\n--------\n\nSET @g = ST_AsBinary(MLineFromText(\'MULTILINESTRING((10 48,10 21,10 0),(16\n0,16 23,16 48))\'));\n\nSELECT ST_AsText(MLineFromWKB(@g));\n+--------------------------------------------------------+\n| ST_AsText(MLineFromWKB(@g))                            |\n+--------------------------------------------------------+\n| MULTILINESTRING((10 48,10 21,10 0),(16 0,16 23,16 48)) |\n+--------------------------------------------------------+\n\nURL: https://mariadb.com/kb/en/mlinefromwkb/','','https://mariadb.com/kb/en/mlinefromwkb/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (572,32,'MPointFromWKB','Syntax\n------\n\nMPointFromWKB(wkb[,srid])\nMultiPointFromWKB(wkb[,srid])\n\nDescription\n-----------\n\nConstructs a MULTIPOINT value using its WKB representation and SRID.\n\nMPointFromWKB() and MultiPointFromWKB() are synonyms.\n\nExamples\n--------\n\nSET @g = ST_AsBinary(MPointFromText(\'MultiPoint( 1 1, 2 2, 5 3, 7 2, 9 3, 8 4,\n6 6, 6 9, 4 9, 1 5 )\'));\n\nSELECT ST_AsText(MPointFromWKB(@g));\n+-----------------------------------------------------+\n| ST_AsText(MPointFromWKB(@g))                        |\n+-----------------------------------------------------+\n| MULTIPOINT(1 1,2 2,5 3,7 2,9 3,8 4,6 6,6 9,4 9,1 5) |\n+-----------------------------------------------------+\n\nURL: https://mariadb.com/kb/en/mpointfromwkb/','','https://mariadb.com/kb/en/mpointfromwkb/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (573,32,'MPolyFromWKB','Syntax\n------\n\nMPolyFromWKB(wkb[,srid])\nMultiPolygonFromWKB(wkb[,srid])\n\nDescription\n-----------\n\nConstructs a MULTIPOLYGON value using its WKB representation and SRID.\n\nMPolyFromWKB() and MultiPolygonFromWKB() are synonyms.\n\nExamples\n--------\n\nSET @g = ST_AsBinary(MPointFromText(\'MULTIPOLYGON(((28 26,28 0,84 0,84 42,28\n26),(52 18,66 23,73 9,48 6,52 18)),((59 18,67 18,67 13,59 13,59 18)))\'));\n\nSELECT ST_AsText(MPolyFromWKB(@g))\\G\n*************************** 1. row ***************************\nST_AsText(MPolyFromWKB(@g)): MULTIPOLYGON(((28 26,28 0,84 0,84 42,28 26),(52\n18,66 23,73 9,48 6,52 18)),((59 18,67 18,67 13,59 13,59 18)))\n\nURL: https://mariadb.com/kb/en/mpolyfromwkb/','','https://mariadb.com/kb/en/mpolyfromwkb/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (574,32,'GeomCollFromWKB','A synonym for ST_GeomCollFromWKB.\n\nURL: https://mariadb.com/kb/en/wkb-geomcollfromwkb/','','https://mariadb.com/kb/en/wkb-geomcollfromwkb/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (575,32,'GeometryCollectionFromWKB','A synonym for ST_GeomCollFromWKB.\n\nURL: https://mariadb.com/kb/en/geometrycollectionfromwkb/','','https://mariadb.com/kb/en/geometrycollectionfromwkb/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (576,32,'GeometryFromWKB','A synonym for ST_GeomFromWKB.\n\nURL: https://mariadb.com/kb/en/geometryfromwkb/','','https://mariadb.com/kb/en/geometryfromwkb/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (577,32,'GeomFromWKB','A synonym for ST_GeomFromWKB.\n\nURL: https://mariadb.com/kb/en/wkb-geomfromwkb/','','https://mariadb.com/kb/en/wkb-geomfromwkb/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (578,32,'LineFromWKB','A synonym for ST_LineFromWKB.\n\nURL: https://mariadb.com/kb/en/wkb-linefromwkb/','','https://mariadb.com/kb/en/wkb-linefromwkb/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (579,32,'LineStringFromWKB','A synonym for ST_LineFromWKB.\n\nURL: https://mariadb.com/kb/en/linestringfromwkb/','','https://mariadb.com/kb/en/linestringfromwkb/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (580,32,'MultiLineStringFromWKB','A synonym for MLineFromWKB().\n\nURL: https://mariadb.com/kb/en/multilinestringfromwkb/','','https://mariadb.com/kb/en/multilinestringfromwkb/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (581,32,'MultiPointFromWKB','A synonym for MPointFromWKB.\n\nURL: https://mariadb.com/kb/en/multipointfromwkb/','','https://mariadb.com/kb/en/multipointfromwkb/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (582,32,'MultiPolygonFromWKB','Synonym for MPolyFromWKB.\n\nURL: https://mariadb.com/kb/en/multipolygonfromwkb/','','https://mariadb.com/kb/en/multipolygonfromwkb/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (583,32,'PointFromWKB','A synonym for ST_PointFromWKB.\n\nURL: https://mariadb.com/kb/en/wkb-pointfromwkb/','','https://mariadb.com/kb/en/wkb-pointfromwkb/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (584,32,'PolyFromWKB','A synonym for ST_PolyFromWKB.\n\nURL: https://mariadb.com/kb/en/wkb-polyfromwkb/','','https://mariadb.com/kb/en/wkb-polyfromwkb/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (585,32,'PolygonFromWKB','A synonym for ST_PolyFromWKB.\n\nURL: https://mariadb.com/kb/en/polygonfromwkb/','','https://mariadb.com/kb/en/polygonfromwkb/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (586,32,'ST_AsBinary','Syntax\n------\n\nST_AsBinary(g)\nAsBinary(g)\nST_AsWKB(g)\nAsWKB(g)\n\nDescription\n-----------\n\nConverts a value in internal geometry format to its WKB representation and\nreturns the binary result.\n\nST_AsBinary(), AsBinary(), ST_AsWKB() and AsWKB() are synonyms,\n\nExamples\n--------\n\nSET @poly = ST_GeomFromText(\'POLYGON((0 0,0 1,1 1,1 0,0 0))\');\nSELECT ST_AsBinary(@poly);\n\nSELECT ST_AsText(ST_GeomFromWKB(ST_AsWKB(@poly)));\n+--------------------------------------------+\n| ST_AsText(ST_GeomFromWKB(ST_AsWKB(@poly))) |\n+--------------------------------------------+\n| POLYGON((0 0,0 1,1 1,1 0,0 0))             |\n+--------------------------------------------+\n\nURL: https://mariadb.com/kb/en/st_asbinary/','','https://mariadb.com/kb/en/st_asbinary/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (587,32,'ST_AsWKB','A synonym for ST_AsBinary().\n\nURL: https://mariadb.com/kb/en/st_aswkb/','','https://mariadb.com/kb/en/st_aswkb/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (588,32,'ST_GeomCollFromWKB','Syntax\n------\n\nST_GeomCollFromWKB(wkb[,srid])\nST_GeometryCollectionFromWKB(wkb[,srid])\nGeomCollFromWKB(wkb[,srid])\nGeometryCollectionFromWKB(wkb[,srid])\n\nDescription\n-----------\n\nConstructs a GEOMETRYCOLLECTION value using its WKB representation and SRID.\n\nST_GeomCollFromWKB(), ST_GeometryCollectionFromWKB(), GeomCollFromWKB() and\nGeometryCollectionFromWKB() are synonyms.\n\nExamples\n--------\n\nSET @g = ST_AsBinary(ST_GeomFromText(\'GEOMETRYCOLLECTION(\n POLYGON((5 5,10 5,10 10,5 5)),POINT(10 10))\'));\n\nSELECT ST_AsText(ST_GeomCollFromWKB(@g));\n+----------------------------------------------------------------+\n| ST_AsText(ST_GeomCollFromWKB(@g))                              |\n+----------------------------------------------------------------+\n| GEOMETRYCOLLECTION(POLYGON((5 5,10 5,10 10,5 5)),POINT(10 10)) |\n+----------------------------------------------------------------+\n\nURL: https://mariadb.com/kb/en/st_geomcollfromwkb/','','https://mariadb.com/kb/en/st_geomcollfromwkb/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (589,32,'ST_GeometryCollectionFromWKB','A synonym for ST_GeomCollFromWKB.\n\nURL: https://mariadb.com/kb/en/st_geometrycollectionfromwkb/','','https://mariadb.com/kb/en/st_geometrycollectionfromwkb/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (590,32,'ST_GeometryFromWKB','A synonym for ST_GeomFromWKB.\n\nURL: https://mariadb.com/kb/en/st_geometryfromwkb/','','https://mariadb.com/kb/en/st_geometryfromwkb/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (591,32,'ST_GeomFromWKB','Syntax\n------\n\nST_GeomFromWKB(wkb[,srid])\nST_GeometryFromWKB(wkb[,srid])\nGeomFromWKB(wkb[,srid])\nGeometryFromWKB(wkb[,srid])\n\nDescription\n-----------\n\nConstructs a geometry value of any type using its WKB representation and SRID.\n\nST_GeomFromWKB(), ST_GeometryFromWKB(), GeomFromWKB() and GeometryFromWKB()\nare synonyms.\n\nExamples\n--------\n\nSET @g = ST_AsBinary(ST_LineFromText(\'LINESTRING(0 4, 4 6)\'));\n\nSELECT ST_AsText(ST_GeomFromWKB(@g));\n+-------------------------------+\n| ST_AsText(ST_GeomFromWKB(@g)) |\n+-------------------------------+\n| LINESTRING(0 4,4 6)           |\n+-------------------------------+\n\nURL: https://mariadb.com/kb/en/st_geomfromwkb/','','https://mariadb.com/kb/en/st_geomfromwkb/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (592,32,'ST_LineFromWKB','Syntax\n------\n\nST_LineFromWKB(wkb[,srid])\nLineFromWKB(wkb[,srid])\nST_LineStringFromWKB(wkb[,srid])\nLineStringFromWKB(wkb[,srid])\n\nDescription\n-----------\n\nConstructs a LINESTRING value using its WKB representation and SRID.\n\nST_LineFromWKB(), LineFromWKB(), ST_LineStringFromWKB(), and\nLineStringFromWKB() are synonyms.\n\nExamples\n--------\n\nSET @g = ST_AsBinary(ST_LineFromText(\'LineString(0 4,4 6)\'));\n\nSELECT ST_AsText(ST_LineFromWKB(@g)) AS l;\n+---------------------+\n| l                   |\n+---------------------+\n| LINESTRING(0 4,4 6) |\n+---------------------+\n\nURL: https://mariadb.com/kb/en/st_linefromwkb/','','https://mariadb.com/kb/en/st_linefromwkb/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (593,32,'ST_LineStringFromWKB','A synonym for ST_LineFromWKB.\n\nURL: https://mariadb.com/kb/en/st_linestringfromwkb/','','https://mariadb.com/kb/en/st_linestringfromwkb/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (594,32,'ST_PointFromWKB','Syntax\n------\n\nST_PointFromWKB(wkb[,srid])\nPointFromWKB(wkb[,srid])\n\nDescription\n-----------\n\nConstructs a POINT value using its WKB representation and SRID.\n\nST_PointFromWKB() and PointFromWKB() are synonyms.\n\nExamples\n--------\n\nSET @g = ST_AsBinary(ST_PointFromText(\'POINT(0 4)\'));\n\nSELECT ST_AsText(ST_PointFromWKB(@g)) AS p;\n+------------+\n| p          |\n+------------+\n| POINT(0 4) |\n+------------+\n\nURL: https://mariadb.com/kb/en/st_pointfromwkb/','','https://mariadb.com/kb/en/st_pointfromwkb/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (595,32,'ST_PolyFromWKB','Syntax\n------\n\nST_PolyFromWKB(wkb[,srid])\nST_PolygonFromWKB(wkb[,srid])\nPolyFromWKB(wkb[,srid])\nPolygonFromWKB(wkb[,srid])\n\nDescription\n-----------\n\nConstructs a POLYGON value using its WKB representation and SRID.\n\nST_PolyFromWKB(), ST_PolygonFromWKB(), PolyFromWKB() and PolygonFromWKB() are\nsynonyms.\n\nExamples\n--------\n\nSET @g = ST_AsBinary(ST_PolyFromText(\'POLYGON((1 1,1 5,4 9,6 9,9 3,7 2,1\n1))\'));\n\nSELECT ST_AsText(ST_PolyFromWKB(@g)) AS p;\n+----------------------------------------+\n| p                                      |\n+----------------------------------------+\n| POLYGON((1 1,1 5,4 9,6 9,9 3,7 2,1 1)) |\n+----------------------------------------+\n\nURL: https://mariadb.com/kb/en/st_polyfromwkb/','','https://mariadb.com/kb/en/st_polyfromwkb/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (596,32,'ST_PolygonFromWKB','A synonym for ST_PolyFromWKB.\n\nURL: https://mariadb.com/kb/en/st_polygonfromwkb/','','https://mariadb.com/kb/en/st_polygonfromwkb/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (597,34,'Geometry Types','Description\n-----------\n\nMariaDB provides a standard way of creating spatial columns for geometry\ntypes, for example, with CREATE TABLE or ALTER TABLE. Currently, spatial\ncolumns are supported for MyISAM, InnoDB and ARCHIVE tables. See also SPATIAL\nINDEX.\n\nThe basic geometry type is GEOMETRY. But the type can be more specific. The\nfollowing types are supported:\n\n+-----------------------------------------------------------------------------+\n| Geometry Types                                                              |\n+-----------------------------------------------------------------------------+\n| POINT                                                                       |\n+-----------------------------------------------------------------------------+\n| LINESTRING                                                                  |\n+-----------------------------------------------------------------------------+\n| POLYGON                                                                     |\n+-----------------------------------------------------------------------------+\n| MULTIPOINT                                                                  |\n+-----------------------------------------------------------------------------+\n| MULTILINESTRING                                                             |\n+-----------------------------------------------------------------------------+\n| MULTIPOLYGON                                                                |\n+-----------------------------------------------------------------------------+\n| GEOMETRYCOLLECTION                                                          |\n+-----------------------------------------------------------------------------+\n| GEOMETRY                                                                    |\n+-----------------------------------------------------------------------------+\n\nExamples\n--------\n\nNote: For clarity, only one type is listed per table in the examples below,\nbut a table row can contain multiple types. For example:\n\nCREATE TABLE object (shapeA POLYGON, shapeB LINESTRING);\n\nPOINT\n-----\n\nCREATE TABLE gis_point  (g POINT);\nSHOW FIELDS FROM gis_point;\nINSERT INTO gis_point VALUES\n  (PointFromText(\'POINT(10 10)\')),\n  (PointFromText(\'POINT(20 10)\')),\n  (PointFromText(\'POINT(20 20)\')),\n  (PointFromWKB(AsWKB(PointFromText(\'POINT(10 20)\'))));\n\nLINESTRING\n----------\n\nCREATE TABLE gis_line  (g LINESTRING);\nSHOW FIELDS FROM gis_line;\nINSERT INTO gis_line VALUES\n  (LineFromText(\'LINESTRING(0 0,0 10,10 0)\')),\n  (LineStringFromText(\'LINESTRING(10 10,20 10,20 20,10 20,10 10)\')),\n  (LineStringFromWKB(AsWKB(LineString(Point(10, 10), Point(40, 10)))));\n\nPOLYGON\n-------\n\nCREATE TABLE gis_polygon   (g POLYGON);\nSHOW FIELDS FROM gis_polygon;\nINSERT INTO gis_polygon VALUES\n  (PolygonFromText(\'POLYGON((10 10,20 10,20 20,10 20,10 10))\')),\n  (PolyFromText(\'POLYGON((0 0,50 0,50 50,0 50,0 0), (10 10,20 10,20 20,10\n20,10 10))\')),\n  (PolyFromWKB(AsWKB(Polygon(LineString(Point(0, 0), Point(30, 0), Point(30,\n30), Point(0, 0))))));\n\nMULTIPOINT\n----------\n\nCREATE TABLE gis_multi_point (g MULTIPOINT);\nSHOW FIELDS FROM gis_multi_point;\nINSERT INTO gis_multi_point VALUES\n  (MultiPointFromText(\'MULTIPOINT(0 0,10 10,10 20,20 20)\')),\n  (MPointFromText(\'MULTIPOINT(1 1,11 11,11 21,21 21)\')),\n  (MPointFromWKB(AsWKB(MultiPoint(Point(3, 6), Point(4, 10)))));\n\nMULTILINESTRING\n---------------\n\nCREATE TABLE gis_multi_line (g MULTILINESTRING);\nSHOW FIELDS FROM gis_multi_line;\nINSERT INTO gis_multi_line VALUES\n  (MultiLineStringFromText(\'MULTILINESTRING((10 48,10 21,10 0),(16 0,16\n23,16 48))\')),\n  (MLineFromText(\'MULTILINESTRING((10 48,10 21,10 0))\')),\n  (MLineFromWKB(AsWKB(MultiLineString(LineString(Point(1, 2), Point(3, 5)),\nLineString(Point(2, 5), Point(5, 8), Point(21, 7))))));\n\nMULTIPOLYGON\n------------\n\nCREATE TABLE gis_multi_polygon  (g MULTIPOLYGON);\nSHOW FIELDS FROM gis_multi_polygon;\nINSERT INTO gis_multi_polygon VALUES\n  (MultiPolygonFromText(\'MULTIPOLYGON(((28 26,28 0,84 0,84 42,28 26),(52\n18,66 23,73 9,48 6,52 18)),((59 18,67 18,67 13,59 13,59 18)))\')),\n  (MPolyFromText(\'MULTIPOLYGON(((28 26,28 0,84 0,84 42,28 26),(52 18,66\n23,73 9,48 6,52 18)),((59 18,67 18,67 13,59 13,59 18)))\')),\n  (MPolyFromWKB(AsWKB(MultiPolygon(Polygon(LineString(Point(0, 3), Point(3,\n3), Point(3, 0), Point(0, 3)))))));\n\nGEOMETRYCOLLECTION\n------------------\n\nCREATE TABLE gis_geometrycollection  (g GEOMETRYCOLLECTION);\nSHOW FIELDS FROM gis_geometrycollection;\nINSERT INTO gis_geometrycollection VALUES\n  (GeomCollFromText(\'GEOMETRYCOLLECTION(POINT(0 0), LINESTRING(0 0,10\n10))\')),\n  (GeometryFromWKB(AsWKB(GeometryCollection(Point(44, 6),\nLineString(Point(3, 6), Point(7, 9)))))),\n  (GeomFromText(\'GeometryCollection()\')),\n  (GeomFromText(\'GeometryCollection EMPTY\'));\n\nGEOMETRY\n--------\n\nCREATE TABLE gis_geometry (g GEOMETRY);\nSHOW FIELDS FROM gis_geometry;\nINSERT into gis_geometry SELECT * FROM gis_point;\nINSERT into gis_geometry SELECT * FROM gis_line;\nINSERT into gis_geometry SELECT * FROM gis_polygon;\nINSERT into gis_geometry SELECT * FROM gis_multi_point;\nINSERT into gis_geometry SELECT * FROM gis_multi_line;\nINSERT into gis_geometry SELECT * FROM gis_multi_polygon;\nINSERT into gis_geometry SELECT * FROM gis_geometrycollection;\n\nURL: https://mariadb.com/kb/en/geometry-types/','','https://mariadb.com/kb/en/geometry-types/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (598,34,'Geometry Hierarchy','Description\n-----------\n\nGeometry is the base class. It is an abstract class. The instantiable\nsubclasses of Geometry are restricted to zero-, one-, and two-dimensional\ngeometric objects that exist in two-dimensional coordinate space. All\ninstantiable geometry classes are defined so that valid instances of a\ngeometry class are topologically closed (that is, all defined geometries\ninclude their boundary).\n\nThe base Geometry class has subclasses for Point, Curve, Surface, and\nGeometryCollection:\n\n* Point represents zero-dimensional objects.\n* Curve represents one-dimensional objects, and has subclass LineString, with\nsub-subclasses Line and LinearRing.\n* Surface is designed for two-dimensional objects and has subclass Polygon.\n* GeometryCollection has specialized zero-, one-, and two-dimensional\ncollection classes named MultiPoint, MultiLineString, and MultiPolygon for\nmodeling geometries corresponding to collections of Points, LineStrings, and\nPolygons, respectively. MultiCurve and MultiSurface are introduced as abstract\nsuperclasses that generalize the collection interfaces to handle Curves and\nSurfaces.\n\nGeometry, Curve, Surface, MultiCurve, and MultiSurface are defined as\nnon-instantiable classes. They define a common set of methods for their\nsubclasses and are included for extensibility.\n\nPoint, LineString, Polygon, GeometryCollection, MultiPoint, MultiLineString,\nand MultiPolygon are instantiable classes.\n\nURL: https://mariadb.com/kb/en/geometry-hierarchy/','','https://mariadb.com/kb/en/geometry-hierarchy/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (599,34,'SPATIAL INDEX','Description\n-----------\n\nOn MyISAM, Aria and InnoDB tables, MariaDB can create spatial indexes (an\nR-tree index) using syntax similar to that for creating regular indexes, but\nextended with the SPATIAL keyword. Currently, columns in spatial indexes must\nbe declared NOT NULL.\n\nSpatial indexes can be created when the table is created, or added after the\nfact like so:\n\n* with CREATE TABLE: CREATE TABLE geom (g GEOMETRY NOT NULL, SPATIAL INDEX(g));\n\n* with ALTER TABLE: ALTER TABLE geom ADD SPATIAL INDEX(g);\n\n* with CREATE INDEX: CREATE SPATIAL INDEX sp_index ON geom (g);\n\nSPATIAL INDEX creates an R-tree index. For storage engines that support\nnon-spatial indexing of spatial columns, the engine creates a B-tree index. A\nB-tree index on spatial values is useful for exact-value lookups, but not for\nrange scans.\n\nFor more information on indexing spatial columns, see CREATE INDEX.\n\nTo drop spatial indexes, use ALTER TABLE or DROP INDEX:\n\n* with ALTER TABLE: ALTER TABLE geom DROP INDEX g;\n\n* with DROP INDEX: DROP INDEX sp_index ON geom;\n\nData-at-Rest Encyption\n----------------------\n\nBefore MariaDB 10.4.3, InnoDB\'s spatial indexes could not be encrypted. If an\nInnoDB table was encrypted and if it contained spatial indexes, then those\nindexes would be unencrypted.\n\nIn MariaDB 10.4.3 and later, if innodb_checksum_algorithm is set to full_crc32\nor strict_full_crc32, and if the table does not use ROW_FORMAT=COMPRESSED,\nthen InnoDB spatial indexes will be encrypted if the table is encrypted.\n\nSee MDEV-12026 for more information.\n\nURL: https://mariadb.com/kb/en/spatial-index/','','https://mariadb.com/kb/en/spatial-index/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (600,35,'BOUNDARY','A synonym for ST_BOUNDARY.\n\nURL: https://mariadb.com/kb/en/geometry-properties-boundary/','','https://mariadb.com/kb/en/geometry-properties-boundary/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (601,35,'DIMENSION','A synonym for ST_DIMENSION.\n\nURL: https://mariadb.com/kb/en/dimension/','','https://mariadb.com/kb/en/dimension/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (602,35,'ENVELOPE','A synonym for ST_ENVELOPE.\n\nURL: https://mariadb.com/kb/en/geometry-properties-envelope/','','https://mariadb.com/kb/en/geometry-properties-envelope/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (603,35,'GeometryN','A synonym for ST_GeometryN.\n\nURL: https://mariadb.com/kb/en/geometry-properties-geometryn/','','https://mariadb.com/kb/en/geometry-properties-geometryn/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (604,35,'GeometryType','A synonym for ST_GeometryType.\n\nURL: https://mariadb.com/kb/en/geometry-properties-geometrytype/','','https://mariadb.com/kb/en/geometry-properties-geometrytype/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (605,35,'IsClosed','A synonym for ST_IsClosed.\n\nURL: https://mariadb.com/kb/en/isclosed/','','https://mariadb.com/kb/en/isclosed/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (606,35,'IsEmpty','A synonym for ST_IsEmpty.\n\nURL: https://mariadb.com/kb/en/geometry-properties-isempty/','','https://mariadb.com/kb/en/geometry-properties-isempty/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (607,35,'IsRing','A synonym for ST_IsRing.\n\nURL: https://mariadb.com/kb/en/isring/','','https://mariadb.com/kb/en/isring/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (608,35,'IsSimple','A synonym for ST_IsSImple.\n\nURL: https://mariadb.com/kb/en/geometry-properties-issimple/','','https://mariadb.com/kb/en/geometry-properties-issimple/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (609,35,'NumGeometries','A synonym for ST_NumGeometries.\n\nURL: https://mariadb.com/kb/en/geometry-properties-numgeometries/','','https://mariadb.com/kb/en/geometry-properties-numgeometries/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (610,35,'SRID','A synonym for ST_SRID.\n\nURL: https://mariadb.com/kb/en/geometry-properties-srid/','','https://mariadb.com/kb/en/geometry-properties-srid/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (611,35,'ST_BOUNDARY','MariaDB starting with 10.1.2\n----------------------------\nThe ST_BOUNDARY function was introduced in MariaDB 10.1.2\n\nSyntax\n------\n\nST_BOUNDARY(g)\nBOUNDARY(g)\n\nDescription\n-----------\n\nReturns a geometry that is the closure of the combinatorial boundary of the\ngeometry value g.\n\nBOUNDARY() is a synonym.\n\nExamples\n--------\n\nSELECT ST_AsText(ST_Boundary(ST_GeomFromText(\'LINESTRING(3 3,0 0, -3 3)\')));\n+----------------------------------------------------------------------+\n| ST_AsText(ST_Boundary(ST_GeomFromText(\'LINESTRING(3 3,0 0, -3 3)\'))) |\n+----------------------------------------------------------------------+\n| MULTIPOINT(3 3,-3 3)                                                 |\n+----------------------------------------------------------------------+\n\nSELECT ST_AsText(ST_Boundary(ST_GeomFromText(\'POLYGON((3 3,0 0, -3 3, 3\n3))\')));\n+--------------------------------------------------------------------------+\n| ST_AsText(ST_Boundary(ST_GeomFromText(\'POLYGON((3 3,0 0, -3 3, 3 3))\'))) |\n+--------------------------------------------------------------------------+\n| LINESTRING(3 3,0 0,-3 3,3 3)                                             |\n+--------------------------------------------------------------------------+\n\nURL: https://mariadb.com/kb/en/st_boundary/','','https://mariadb.com/kb/en/st_boundary/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (612,35,'ST_DIMENSION','Syntax\n------\n\nST_Dimension(g)\nDimension(g)\n\nDescription\n-----------\n\nReturns the inherent dimension of the geometry value g. The result can be\n\n+------------------------------------+---------------------------------------+\n| Dimension                          | Definition                            |\n+------------------------------------+---------------------------------------+\n| -1                                 | empty geometry                        |\n+------------------------------------+---------------------------------------+\n| 0                                  | geometry with no length or area       |\n+------------------------------------+---------------------------------------+\n| 1                                  | geometry with no area but nonzero     |\n|                                    | length                                |\n+------------------------------------+---------------------------------------+\n| 2                                  | geometry with nonzero area            |\n+------------------------------------+---------------------------------------+\n\nST_Dimension() and Dimension() are synonyms.\n\nExamples\n--------\n\nSELECT Dimension(GeomFromText(\'LineString(1 1,2 2)\'));\n+------------------------------------------------+\n| Dimension(GeomFromText(\'LineString(1 1,2 2)\')) |\n+------------------------------------------------+\n|                                              1 |\n+------------------------------------------------+\n\nURL: https://mariadb.com/kb/en/st_dimension/','','https://mariadb.com/kb/en/st_dimension/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (613,35,'ST_ENVELOPE','Syntax\n------\n\nST_ENVELOPE(g)\nENVELOPE(g)\n\nDescription\n-----------\n\nReturns the Minimum Bounding Rectangle (MBR) for the geometry value g. The\nresult is returned as a Polygon value.\n\nThe polygon is defined by the corner points of the bounding box:\n\nPOLYGON((MINX MINY, MAXX MINY, MAXX MAXY, MINX MAXY, MINX MINY))\n\nST_ENVELOPE() and ENVELOPE() are synonyms.\n\nExamples\n--------\n\nSELECT AsText(ST_ENVELOPE(GeomFromText(\'LineString(1 1,4 4)\')));\n+----------------------------------------------------------+\n| AsText(ST_ENVELOPE(GeomFromText(\'LineString(1 1,4 4)\'))) |\n+----------------------------------------------------------+\n| POLYGON((1 1,4 1,4 4,1 4,1 1))                           |\n+----------------------------------------------------------+\n\nURL: https://mariadb.com/kb/en/st_envelope/','','https://mariadb.com/kb/en/st_envelope/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (614,35,'ST_GEOMETRYN','Syntax\n------\n\nST_GeometryN(gc,N)\nGeometryN(gc,N)\n\nDescription\n-----------\n\nReturns the N-th geometry in the GeometryCollection gc. Geometries are\nnumbered beginning with 1.\n\nST_GeometryN() and GeometryN() are synonyms.\n\nExample\n-------\n\nSET @gc = \'GeometryCollection(Point(1 1),LineString(12 14, 9 11))\';\n\nSELECT AsText(GeometryN(GeomFromText(@gc),1));\n+----------------------------------------+\n| AsText(GeometryN(GeomFromText(@gc),1)) |\n+----------------------------------------+\n| POINT(1 1)                             |\n+----------------------------------------+\n\nURL: https://mariadb.com/kb/en/st_geometryn/','','https://mariadb.com/kb/en/st_geometryn/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (615,35,'ST_GEOMETRYTYPE','Syntax\n------\n\nST_GeometryType(g)\nGeometryType(g)\n\nDescription\n-----------\n\nReturns as a string the name of the geometry type of which the geometry\ninstance g is a member. The name corresponds to one of the instantiable\nGeometry subclasses.\n\nST_GeometryType() and GeometryType() are synonyms.\n\nExamples\n--------\n\nSELECT GeometryType(GeomFromText(\'POINT(1 1)\'));\n+------------------------------------------+\n| GeometryType(GeomFromText(\'POINT(1 1)\')) |\n+------------------------------------------+\n| POINT                                    |\n+------------------------------------------+\n\nURL: https://mariadb.com/kb/en/st_geometrytype/','','https://mariadb.com/kb/en/st_geometrytype/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (616,35,'ST_ISCLOSED','Syntax\n------\n\nST_IsClosed(g)\nIsClosed(g)\n\nDescription\n-----------\n\nReturns 1 if a given LINESTRING\'s start and end points are the same, or 0 if\nthey are not the same. Before MariaDB 10.1.5, returns NULL if not given a\nLINESTRING. After MariaDB 10.1.5, returns -1.\n\nST_IsClosed() and IsClosed() are synonyms.\n\nExamples\n--------\n\nSET @ls = \'LineString(0 0, 0 4, 4 4, 0 0)\';\nSELECT ST_ISCLOSED(GEOMFROMTEXT(@ls));\n+--------------------------------+\n| ST_ISCLOSED(GEOMFROMTEXT(@ls)) |\n+--------------------------------+\n|                              1 |\n+--------------------------------+\n\nSET @ls = \'LineString(0 0, 0 4, 4 4, 0 1)\';\nSELECT ST_ISCLOSED(GEOMFROMTEXT(@ls));\n+--------------------------------+\n| ST_ISCLOSED(GEOMFROMTEXT(@ls)) |\n+--------------------------------+\n|                              0 |\n+--------------------------------+\n\nURL: https://mariadb.com/kb/en/st_isclosed/','','https://mariadb.com/kb/en/st_isclosed/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (617,35,'ST_ISEMPTY','Syntax\n------\n\nST_IsEmpty(g)\nIsEmpty(g)\n\nDescription\n-----------\n\nIsEmpty is a function defined by the OpenGIS specification, but is not fully\nimplemented by MariaDB or MySQL.\n\nSince MariaDB and MySQL do not support GIS EMPTY values such as POINT EMPTY,\nas implemented it simply returns 1 if the geometry value g is invalid, 0 if it\nis valid, and NULL if the argument is NULL.\n\nST_IsEmpty() and IsEmpty() are synonyms.\n\nURL: https://mariadb.com/kb/en/st_isempty/','','https://mariadb.com/kb/en/st_isempty/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (618,35,'ST_IsRing','MariaDB starting with 10.1.2\n----------------------------\nThe ST_IsRing function was introduced in MariaDB 10.1.2\n\nSyntax\n------\n\nST_IsRing(g)\nIsRing(g)\n\nDescription\n-----------\n\nReturns true if a given LINESTRING is a ring, that is, both ST_IsClosed and\nST_IsSimple. A simple curve does not pass through the same point more than\nonce. However, see MDEV-7510.\n\nSt_IsRing() and IsRing() are synonyms.\n\nURL: https://mariadb.com/kb/en/st_isring/','','https://mariadb.com/kb/en/st_isring/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (619,35,'ST_IsSimple','Syntax\n------\n\nST_IsSimple(g)\nIsSimple(g)\n\nDescription\n-----------\n\nReturns true if the given Geometry has no anomalous geometric points, false if\nit does, or NULL if given a NULL value.\n\nST_IsSimple() and IsSimple() are synonyms.\n\nExamples\n--------\n\nA POINT is always simple.\n\nSET @g = \'Point(1 2)\';\n\nSELECT ST_ISSIMPLE(GEOMFROMTEXT(@g));\n+-------------------------------+\n| ST_ISSIMPLE(GEOMFROMTEXT(@g)) |\n+-------------------------------+\n|                             1 |\n+-------------------------------+\n\nURL: https://mariadb.com/kb/en/st_issimple/','','https://mariadb.com/kb/en/st_issimple/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (620,35,'ST_NUMGEOMETRIES','Syntax\n------\n\nST_NumGeometries(gc)\nNumGeometries(gc)\n\nDescription\n-----------\n\nReturns the number of geometries in the GeometryCollection gc.\n\nST_NumGeometries() and NumGeometries() are synonyms.\n\nExample\n-------\n\nSET @gc = \'GeometryCollection(Point(1 1),LineString(2 2, 3 3))\';\n\nSELECT NUMGEOMETRIES(GeomFromText(@gc));\n+----------------------------------+\n| NUMGEOMETRIES(GeomFromText(@gc)) |\n+----------------------------------+\n|                                2 |\n+----------------------------------+\n\nURL: https://mariadb.com/kb/en/st_numgeometries/','','https://mariadb.com/kb/en/st_numgeometries/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (621,35,'ST_RELATE','MariaDB starting with 10.1.2\n----------------------------\nThe ST_RELATE() function was introduced in MariaDB 10.1.2\n\nSyntax\n------\n\nST_Relate(g1, g2, i)\n\nDescription\n-----------\n\nReturns true if Geometry g1 is spatially related to Geometryg2 by testing for\nintersections between the interior, boundary and exterior of the two\ngeometries as specified by the values in intersection matrix pattern i.\n\nURL: https://mariadb.com/kb/en/st_relate/','','https://mariadb.com/kb/en/st_relate/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (622,35,'ST_SRID','Syntax\n------\n\nST_SRID(g)\nSRID(g)\n\nDescription\n-----------\n\nReturns an integer indicating the Spatial Reference System ID for the geometry\nvalue g.\n\nIn MariaDB, the SRID value is just an integer associated with the geometry\nvalue. All calculations are done assuming Euclidean (planar) geometry.\n\nST_SRID() and SRID() are synonyms.\n\nExamples\n--------\n\nSELECT SRID(GeomFromText(\'LineString(1 1,2 2)\',101));\n+-----------------------------------------------+\n| SRID(GeomFromText(\'LineString(1 1,2 2)\',101)) |\n+-----------------------------------------------+\n|                                           101 |\n+-----------------------------------------------+\n\nURL: https://mariadb.com/kb/en/st_srid/','','https://mariadb.com/kb/en/st_srid/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (623,36,'LOAD_FILE','Syntax\n------\n\nLOAD_FILE(file_name)\n\nDescription\n-----------\n\nReads the file and returns the file contents as a string. To use this\nfunction, the file must be located on the server host, you must specify the\nfull path name to the file, and you must have the FILE privilege. The file\nmust be readable by all and it must be less than the size, in bytes, of the\nmax_allowed_packet system variable. If the secure_file_priv system variable is\nset to a non-empty directory name, the file to be loaded must be located in\nthat directory.\n\nIf the file does not exist or cannot be read because one of the preceding\nconditions is not satisfied, the function returns NULL.\n\nSince MariaDB 5.1, the character_set_filesystem system variable has controlled\ninterpretation of file names that are given as literal strings.\n\nStatements using the LOAD_FILE() function are not safe for statement based\nreplication. This is because the slave will execute the LOAD_FILE() command\nitself. If the file doesn\'t exist on the slave, the function will return NULL.\n\nExamples\n--------\n\nUPDATE t SET blob_col=LOAD_FILE(\'/tmp/picture\') WHERE id=1;\n\nURL: https://mariadb.com/kb/en/load_file/','','https://mariadb.com/kb/en/load_file/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (624,36,'NOT REGEXP','Syntax\n------\n\nexpr NOT REGEXP pat, expr NOT RLIKE pat\n\nDescription\n-----------\n\nThis is the same as NOT (expr REGEXP pat).\n\nURL: https://mariadb.com/kb/en/not-regexp/','','https://mariadb.com/kb/en/not-regexp/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (625,36,'REGEXP','Syntax\n------\n\nexpr REGEXP pat, expr RLIKE pat\n\nDescription\n-----------\n\nPerforms a pattern match of a string expression expr against a pattern pat.\nThe pattern can be an extended regular expression. See Regular Expressions\nOverview for details on the syntax for regular expressions (see also PCRE\nRegular Expressions).\n\nReturns 1 if expr matches pat or 0 if it doesn\'t match. If either expr or pat\nare NULL, the result is NULL.\n\nThe negative form NOT REGEXP also exists, as an alias for NOT (string REGEXP\npattern). RLIKE and NOT RLIKE are synonyms for REGEXP and NOT REGEXP,\noriginally provided for mSQL compatibility.\n\nThe pattern need not be a literal string. For example, it can be specified as\na string expression or table column.\n\nNote: Because MariaDB uses the C escape syntax in strings (for example, \"\\n\"\nto represent the newline character), you must double any \"\\\" that you use in\nyour REGEXP strings.\n\nREGEXP is not case sensitive, except when used with binary strings.\n\nMariaDB 10.0.5 moved to the PCRE regex library - see PCRE Regular Expressions\nfor enhancements to REGEXP introduced in MariaDB 10.0.5.\n\nThe default_regex_flags variable addresses the remaining compatibilities\nbetween PCRE and the old regex library.\n\nExamples\n--------\n\nSELECT \'Monty!\' REGEXP \'m%y%%\';\n+-------------------------+\n| \'Monty!\' REGEXP \'m%y%%\' |\n+-------------------------+\n|                       0 |\n+-------------------------+\n\nSELECT \'Monty!\' REGEXP \'.*\';\n+----------------------+\n| \'Monty!\' REGEXP \'.*\' |\n+----------------------+\n|                    1 |\n+----------------------+\n\nSELECT \'new*\\n*line\' REGEXP \'new\\\\*.\\\\*line\';\n+---------------------------------------+\n| \'new*\\n*line\' REGEXP \'new\\\\*.\\\\*line\' |\n+---------------------------------------+\n|                                     1 |\n+---------------------------------------+\n\nSELECT \'a\' REGEXP \'A\', \'a\' REGEXP BINARY \'A\';\n+----------------+-----------------------+\n| \'a\' REGEXP \'A\' | \'a\' REGEXP BINARY \'A\' |\n+----------------+-----------------------+\n|              1 |                     0 |\n+----------------+-----------------------+\n\nSELECT \'a\' REGEXP \'^[a-d]\';\n+---------------------+\n| \'a\' REGEXP \'^[a-d]\' |\n+---------------------+\n|                   1 |\n+---------------------+\n\ndefault_regex_flags examples\n----------------------------\n\nMariaDB 10.0.11 introduced the default_regex_flags variable to address the\nremaining compatibilities between PCRE and the old regex library.\n\nThe default behaviour (multiline match is off)\n\nSELECT \'a\\nb\\nc\' RLIKE \'^b$\';\n+---------------------------+\n| \'(?m)a\\nb\\nc\' RLIKE \'^b$\' |\n+---------------------------+\n|                         0 |\n+---------------------------+\n\nEnabling the multiline option using the PCRE option syntax:\n\nSELECT \'a\\nb\\nc\' RLIKE \'(?m)^b$\';\n+---------------------------+\n| \'a\\nb\\nc\' RLIKE \'(?m)^b$\' |\n+---------------------------+\n|                         1 |\n+---------------------------+\n\nEnabling the multiline option using default_regex_flags\n\nSET default_regex_flags=\'MULTILINE\';\nSELECT \'a\\nb\\nc\' RLIKE \'^b$\';\n+-----------------------+\n| \'a\\nb\\nc\' RLIKE \'^b$\' |\n+-----------------------+\n|                     1 |\n+-----------------------+\n\nURL: https://mariadb.com/kb/en/regexp/','','https://mariadb.com/kb/en/regexp/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (626,36,'REGEXP_INSTR','Syntax\n------\n\nREGEXP_INSTR(subject, pattern)\n\nReturns the position of the first occurrence of the regular expression pattern\nin the string subject, or 0 if pattern was not found.\n\nThe positions start with 1 and are measured in characters (i.e. not in bytes),\nwhich is important for multi-byte character sets. You can cast a multi-byte\ncharacter set to BINARY to get offsets in bytes.\n\nThe function follows the case sensitivity rules of the effective collation.\nMatching is performed case insensitively for case insensitive collations, and\ncase sensitively for case sensitive collations and for binary data.\n\nThe collation case sensitivity can be overwritten using the (?i) and (?-i)\nPCRE flags.\n\nMariaDB uses the PCRE regular expression library for enhanced regular\nexpression performance, and REGEXP_INSTR was introduced as part of this\nenhancement.\n\nExamples\n--------\n\nSELECT REGEXP_INSTR(\'abc\',\'b\');\n-> 2\n\nSELECT REGEXP_INSTR(\'abc\',\'x\');\n-> 0\n\nSELECT REGEXP_INSTR(\'BJÖRN\',\'N\');\n-> 5\n\nCasting a multi-byte character set as BINARY to get offsets in bytes:\n\nSELECT REGEXP_INSTR(BINARY \'BJÖRN\',\'N\') AS cast_utf8_to_binary;\n-> 6\n\nCase sensitivity:\n\nSELECT REGEXP_INSTR(\'ABC\',\'b\');\n-> 2\n\nSELECT REGEXP_INSTR(\'ABC\' COLLATE utf8_bin,\'b\');\n-> 0\n\nSELECT REGEXP_INSTR(BINARY\'ABC\',\'b\');\n-> 0\n\nSELECT REGEXP_INSTR(\'ABC\',\'(?-i)b\');\n-> 0\n\nSELECT REGEXP_INSTR(\'ABC\' COLLATE utf8_bin,\'(?i)b\');\n-> 2\n\nURL: https://mariadb.com/kb/en/regexp_instr/','','https://mariadb.com/kb/en/regexp_instr/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (627,36,'REGEXP_REPLACE','Syntax\n------\n\nREGEXP_REPLACE(subject, pattern, replace)\n\nDescription\n-----------\n\nREGEXP_REPLACE returns the string subject with all occurrences of the regular\nexpression pattern replaced by the string replace. If no occurrences are\nfound, then subject is returned as is.\n\nThe replace string can have backreferences to the subexpressions in the form\n\\N, where N is a number from 1 to 9.\n\nThe function follows the case sensitivity rules of the effective collation.\nMatching is performed case insensitively for case insensitive collations, and\ncase sensitively for case sensitive collations and for binary data.\n\nThe collation case sensitivity can be overwritten using the (?i) and (?-i)\nPCRE flags.\n\nMariaDB uses the PCRE regular expression library for enhanced regular\nexpression performance, and REGEXP_REPLACE was introduced as part of this\nenhancement.\n\nThe default_regex_flags variable addresses the remaining compatibilities\nbetween PCRE and the old regex library.\n\nExamples\n--------\n\nSELECT REGEXP_REPLACE(\'ab12cd\',\'[0-9]\',\'\') AS remove_digits;\n-> abcd\n\nSELECT\nREGEXP_REPLACE(\'<html><head><title>title</title><body>body</body></htm>\',\n\'<.+?>\',\' \')\nAS strip_html;\n-> title  body\n\nBackreferences to the subexpressions in the form \\N, where N is a number from\n1 to 9:\n\nSELECT REGEXP_REPLACE(\'James Bond\',\'^(.*) (.*)$\',\'\\\\2, \\\\1\') AS reorder_name;\n-> Bond, James\n\nCase insensitive and case sensitive matches:\n\nSELECT REGEXP_REPLACE(\'ABC\',\'b\',\'-\') AS case_insensitive;\n-> A-C\n\nSELECT REGEXP_REPLACE(\'ABC\' COLLATE utf8_bin,\'b\',\'-\') AS case_sensitive;\n-> ABC\n\nSELECT REGEXP_REPLACE(BINARY \'ABC\',\'b\',\'-\') AS binary_data;\n-> ABC\n\nOverwriting the collation case sensitivity using the (?i) and (?-i) PCRE flags.\n\nSELECT REGEXP_REPLACE(\'ABC\',\'(?-i)b\',\'-\') AS force_case_sensitive;\n-> ABC\n\nSELECT REGEXP_REPLACE(BINARY \'ABC\',\'(?i)b\',\'-\') AS force_case_insensitive;\n-> A-C\n\nURL: https://mariadb.com/kb/en/regexp_replace/','','https://mariadb.com/kb/en/regexp_replace/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (628,36,'REGEXP_SUBSTR','Syntax\n------\n\nREGEXP_SUBSTR(subject,pattern)\n\nDescription\n-----------\n\nReturns the part of the string subject that matches the regular expression\npattern, or an empty string if pattern was not found.\n\nThe function follows the case sensitivity rules of the effective collation.\nMatching is performed case insensitively for case insensitive collations, and\ncase sensitively for case sensitive collations and for binary data.\n\nThe collation case sensitivity can be overwritten using the (?i) and (?-i)\nPCRE flags.\n\nMariaDB uses the PCRE regular expression library for enhanced regular\nexpression performance, and REGEXP_SUBSTR was introduced as part of this\nenhancement.\n\nThe default_regex_flags variable addresses the remaining compatibilities\nbetween PCRE and the old regex library.\n\nExamples\n--------\n\nSELECT REGEXP_SUBSTR(\'ab12cd\',\'[0-9]+\');\n-> 12\n\nSELECT REGEXP_SUBSTR(\n \'See https://mariadb.org/en/foundation/ for details\',\n \'https?://[^/]*\');\n-> https://mariadb.org\n\nSELECT REGEXP_SUBSTR(\'ABC\',\'b\');\n-> B\n\nSELECT REGEXP_SUBSTR(\'ABC\' COLLATE utf8_bin,\'b\');\n->\n\nSELECT REGEXP_SUBSTR(BINARY\'ABC\',\'b\');\n->\n\nSELECT REGEXP_SUBSTR(\'ABC\',\'(?i)b\');\n-> B\n\nSELECT REGEXP_SUBSTR(\'ABC\' COLLATE utf8_bin,\'(?+i)b\');\n-> B\n\nURL: https://mariadb.com/kb/en/regexp_substr/','','https://mariadb.com/kb/en/regexp_substr/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (629,36,'ASCII','Syntax\n------\n\nASCII(str)\n\nDescription\n-----------\n\nReturns the numeric ASCII value of the leftmost character of the string\nargument. Returns 0 if the given string is empty and NULL if it is NULL.\n\nASCII() works for 8-bit characters.\n\nExamples\n--------\n\nSELECT ASCII(9);\n+----------+\n| ASCII(9) |\n+----------+\n|       57 |\n+----------+\n\nSELECT ASCII(\'9\');\n+------------+\n| ASCII(\'9\') |\n+------------+\n|         57 |\n+------------+\n\nSELECT ASCII(\'abc\');\n+--------------+\n| ASCII(\'abc\') |\n+--------------+\n|           97 |\n+--------------+\n\nURL: https://mariadb.com/kb/en/ascii/','','https://mariadb.com/kb/en/ascii/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (630,36,'BIN','Syntax\n------\n\nBIN(N)\n\nDescription\n-----------\n\nReturns a string representation of the binary value of the given longlong\n(that is, BIGINT) number. This is equivalent to CONV(N,10,2). The argument\nshould be positive. If it is a FLOAT, it will be truncated. Returns NULL if\nthe argument is NULL.\n\nExamples\n--------\n\nSELECT BIN(12);\n+---------+\n| BIN(12) |\n+---------+\n| 1100    |\n+---------+\n\nURL: https://mariadb.com/kb/en/bin/','','https://mariadb.com/kb/en/bin/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (631,36,'BINARY Operator','This page describes the BINARY operator. For details about the data type, see\nBinary Data Type.\n\nSyntax\n------\n\nBINARY\n\nDescription\n-----------\n\nThe BINARY operator casts the string following it to a binary string. This is\nan easy way to force a column comparison to be done byte by byte rather than\ncharacter by character. This causes the comparison to be case sensitive even\nif the column isn\'t defined as BINARY or BLOB.\n\nBINARY also causes trailing spaces to be significant.\n\nExamples\n--------\n\nSELECT \'a\' = \'A\';\n+-----------+\n| \'a\' = \'A\' |\n+-----------+\n|         1 |\n+-----------+\n\nSELECT BINARY \'a\' = \'A\';\n+------------------+\n| BINARY \'a\' = \'A\' |\n+------------------+\n|                0 |\n+------------------+\n\nSELECT \'a\' = \'a \';\n+------------+\n| \'a\' = \'a \' |\n+------------+\n|          1 |\n+------------+\n\nSELECT BINARY \'a\' = \'a \';\n+-------------------+\n| BINARY \'a\' = \'a \' |\n+-------------------+\n|                 0 |\n+-------------------+\n\nURL: https://mariadb.com/kb/en/binary-operator/','','https://mariadb.com/kb/en/binary-operator/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (632,36,'BIT_LENGTH','Syntax\n------\n\nBIT_LENGTH(str)\n\nDescription\n-----------\n\nReturns the length of the given string argument in bits. If the argument is\nnot a string, it will be converted to string. If the argument is NULL, it\nreturns NULL.\n\nExamples\n--------\n\nSELECT BIT_LENGTH(\'text\');\n+--------------------+\n| BIT_LENGTH(\'text\') |\n+--------------------+\n|                 32 |\n+--------------------+\n\nSELECT BIT_LENGTH(\'\');\n+----------------+\n| BIT_LENGTH(\'\') |\n+----------------+\n|              0 |\n+----------------+\n\nCompatibility\n-------------\n\nPostgreSQL and Sybase support BIT_LENGTH().\n\nURL: https://mariadb.com/kb/en/bit_length/','','https://mariadb.com/kb/en/bit_length/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (633,36,'CAST','Syntax\n------\n\nCAST(expr AS type)\n\nDescription\n-----------\n\nThe CAST() function takes a value of one type and produces a value of another\ntype, similar to the CONVERT() function.\n\nThe type can be one of the following values:\n\n* BINARY\n* CHAR\n* DATE\n* DATETIME\n* DECIMAL[(M[,D])]\n* DOUBLE\n* FLOAT (from MariaDB 10.4.5)\n* INTEGER\nShort for SIGNED INTEGER\n\n* SIGNED [INTEGER]\n* UNSIGNED [INTEGER]\n* TIME\n* VARCHAR (in Oracle mode, from MariaDB 10.3)\n\nThe main difference between CAST and CONVERT() is that CONVERT(expr,type) is\nODBC syntax while CAST(expr as type) and CONVERT(... USING ...) are SQL92\nsyntax.\n\nIn MariaDB 10.4 and later, you can use the CAST() function with the INTERVAL\nkeyword.\n\nUntil MariaDB 5.5.31, X\'HHHH\', the standard SQL syntax for binary string\nliterals, erroneously worked in the same way as 0xHHHH. In 5.5.31 it was\nintentionally changed to behave as a string in all contexts (and never as a\nnumber).\n\nThis introduced an incompatibility with previous versions of MariaDB, and all\nversions of MySQL (see the example below).\n\nExamples\n--------\n\nSimple casts:\n\nSELECT CAST(\"abc\" AS BINARY);\nSELECT CAST(\"1\" AS UNSIGNED INTEGER);\nSELECT CAST(123 AS CHAR CHARACTER SET utf8)\n\nNote that when one casts to CHAR without specifying the character set, the\ncollation_connection character set collation will be used. When used with CHAR\nCHARACTER SET, the default collation for that character set will be used.\n\nSELECT COLLATION(CAST(123 AS CHAR));\n+------------------------------+\n| COLLATION(CAST(123 AS CHAR)) |\n+------------------------------+\n| latin1_swedish_ci            |\n+------------------------------+\n\nSELECT COLLATION(CAST(123 AS CHAR CHARACTER SET utf8));\n+-------------------------------------------------+\n| COLLATION(CAST(123 AS CHAR CHARACTER SET utf8)) |\n+-------------------------------------------------+\n| utf8_general_ci                                 |\n+-------------------------------------------------+\n\nIf you also want to change the collation, you have to use the COLLATE operator:\n\nSELECT COLLATION(CAST(123 AS CHAR CHARACTER SET utf8) \n COLLATE utf8_unicode_ci);\n+-------------------------------------------------------------------------+\n| COLLATION(CAST(123 AS CHAR CHARACTER SET utf8) COLLATE utf8_unicode_ci) |\n+-------------------------------------------------------------------------+\n| utf8_unicode_ci                                                         |\n+-------------------------------------------------------------------------+\n\nUsing CAST() to order an ENUM field as a CHAR rather than the internal\nnumerical value:\n\nCREATE TABLE enum_list (enum_field enum(\'c\',\'a\',\'b\'));\n\nINSERT INTO enum_list (enum_field) \nVALUES(\'c\'),(\'a\'),(\'c\'),(\'b\');\n\nSELECT * FROM enum_list \nORDER BY enum_field;\n+------------+\n| enum_field |\n+------------+\n| c          |\n| c          |\n| a          |\n| b          |\n+------------+\n\nSELECT * FROM enum_list \nORDER BY CAST(enum_field AS CHAR);\n+------------+\n| enum_field |\n+------------+\n| a          |\n| b          |\n| c          |\n| c          |\n+------------+\n\nFrom MariaDB 5.5.31, the following will trigger warnings, since x\'aa\' and\n\'X\'aa\' no longer behave as a number. Previously, and in all versions of MySQL,\nno warnings are triggered since they did erroneously behave as a number:\n\nSELECT CAST(0xAA AS UNSIGNED), CAST(x\'aa\' AS UNSIGNED), CAST(X\'aa\' AS\nUNSIGNED);\n+------------------------+-------------------------+-------------------------+\n| CAST(0xAA AS UNSIGNED) | CAST(x\'aa\' AS UNSIGNED) | CAST(X\'aa\' AS UNSIGNED) |\n+------------------------+-------------------------+-------------------------+\n|                    170 |                       0 |                       0 |\n+------------------------+-------------------------+-------------------------+\n1 row in set, 2 warnings (0.00 sec)\n\nWarning (Code 1292): Truncated incorrect INTEGER value: \'\\xAA\'\nWarning (Code 1292): Truncated incorrect INTEGER value: \'\\xAA\'\n\nCasting to intervals:\n\nSELECT CAST(2019-01-04 INTERVAL AS DAY_SECOND(2)) AS \"Cast\";\n\n+-------------+\n| Cast        |\n+-------------+\n| 00:20:17.00 |\n+-------------+\n\nURL: https://mariadb.com/kb/en/cast/','','https://mariadb.com/kb/en/cast/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (634,36,'CHAR Function','Syntax\n------\n\nCHAR(N,... [USING charset_name])\n\nDescription\n-----------\n\nCHAR() interprets each argument as an INT and returns a string consisting of\nthe characters given by the code values of those integers. NULL values are\nskipped. By default, CHAR() returns a binary string. To produce a string in a\ngiven character set, use the optional USING clause:\n\nSELECT CHARSET(CHAR(0x65)), CHARSET(CHAR(0x65 USING utf8));\n+---------------------+--------------------------------+\n| CHARSET(CHAR(0x65)) | CHARSET(CHAR(0x65 USING utf8)) |\n+---------------------+--------------------------------+\n| binary              | utf8                           |\n+---------------------+--------------------------------+\n\nIf USING is given and the result string is illegal for the given character\nset, a warning is issued. Also, if strict SQL mode is enabled, the result from\nCHAR() becomes NULL.\n\nExamples\n--------\n\nSELECT CHAR(77,97,114,\'105\',97,\'68\',66);\n+----------------------------------+\n| CHAR(77,97,114,\'105\',97,\'68\',66) |\n+----------------------------------+\n| MariaDB                          |\n+----------------------------------+\n\nSELECT CHAR(77,77.3,\'77.3\');\n+----------------------+\n| CHAR(77,77.3,\'77.3\') |\n+----------------------+\n| MMM                  |\n+----------------------+\n1 row in set, 1 warning (0.00 sec)\n\nWarning (Code 1292): Truncated incorrect INTEGER value: \'77.3\'\n\nURL: https://mariadb.com/kb/en/char-function/','','https://mariadb.com/kb/en/char-function/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (635,36,'CHAR_LENGTH','Syntax\n------\n\nCHAR_LENGTH(str)\nCHARACTER_LENGTH(str)\n\nDescription\n-----------\n\nReturns the length of the given string argument, measured in characters. A\nmulti-byte character counts as a single character. This means that for a\nstring containing five two-byte characters, LENGTH() (or OCTET_LENGTH() in\nOracle mode) returns 10, whereas CHAR_LENGTH() returns 5. If the argument is\nNULL, it returns NULL.\n\nIf the argument is not a string value, it is converted into a string.\n\nIt is synonymous with the CHARACTER_LENGTH() function.\n\nExamples\n--------\n\nSELECT CHAR_LENGTH(\'MariaDB\');\n+------------------------+\n| CHAR_LENGTH(\'MariaDB\') |\n+------------------------+\n|                      7 |\n+------------------------+\n\nWhen Oracle mode from MariaDB 10.3 is not set:\n\nSELECT CHAR_LENGTH(\'π\'), LENGTH(\'π\'), LENGTHB(\'π\'), OCTET_LENGTH(\'π\');\n+-------------------+--------------+---------------+--------------------+\n| CHAR_LENGTH(\'π\')  | LENGTH(\'π\')  | LENGTHB(\'π\')  | OCTET_LENGTH(\'π\')  |\n+-------------------+--------------+---------------+--------------------+\n|                 1 |            2 |             2 |                  2 |\n+-------------------+--------------+---------------+--------------------+\n\nIn Oracle mode from MariaDB 10.3:\n\nSELECT CHAR_LENGTH(\'π\'), LENGTH(\'π\'), LENGTHB(\'π\'), OCTET_LENGTH(\'π\');\n+-------------------+--------------+---------------+--------------------+\n| CHAR_LENGTH(\'π\')  | LENGTH(\'π\')  | LENGTHB(\'π\')  | OCTET_LENGTH(\'π\')  |\n+-------------------+--------------+---------------+--------------------+\n|                 1 |            1 |             2 |                  2 |\n+-------------------+--------------+---------------+--------------------+\n\nURL: https://mariadb.com/kb/en/char_length/','','https://mariadb.com/kb/en/char_length/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (636,36,'CHR','MariaDB starting with 10.3.1\n----------------------------\nThe CHR() function was introduced in MariaDB 10.3.1 to provide Oracle\ncompatibility\n\nSyntax\n------\n\nCHR(N)\n\nDescription\n-----------\n\nCHR() interprets each argument N as an integer and returns a VARCHAR(1) string\nconsisting of the character given by the code values of the integer. The\ncharacter set and collation of the string are set according to the values of\nthe character_set_database and collation_database system variables.\n\nCHR() is similar to the CHAR() function, but only accepts a single argument.\n\nCHR() is available in all sql_modes.\n\nExamples\n--------\n\nSELECT CHR(67);\n+---------+\n| CHR(67) |\n+---------+\n| C       |\n+---------+\n\nSELECT CHR(\'67\');\n+-----------+\n| CHR(\'67\') |\n+-----------+\n| C         |\n+-----------+\n\nSELECT CHR(\'C\');\n+----------+\n| CHR(\'C\') |\n+----------+\n|          |\n+----------+\n1 row in set, 1 warning (0.000 sec)\n\nSHOW WARNINGS;\n+---------+------+----------------------------------------+\n| Level   | Code | Message                                |\n+---------+------+----------------------------------------+\n| Warning | 1292 | Truncated incorrect INTEGER value: \'C\' |\n+---------+------+----------------------------------------+\n\nURL: https://mariadb.com/kb/en/chr/','','https://mariadb.com/kb/en/chr/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (637,36,'CONCAT','Syntax\n------\n\nCONCAT(str1,str2,...)\n\nDescription\n-----------\n\nReturns the string that results from concatenating the arguments. May have one\nor more arguments. If all arguments are non-binary strings, the result is a\nnon-binary string. If the arguments include any binary strings, the result is\na binary string. A numeric argument is converted to its equivalent binary\nstring form; if you want to avoid that, you can use an explicit type cast, as\nin this example:\n\nSELECT CONCAT(CAST(int_col AS CHAR), char_col);\n\nCONCAT() returns NULL if any argument is NULL.\n\nA NULL parameter hides all information contained in other parameters from the\nresult. Sometimes this is not desirable; to avoid this, you can:\n\n* Use the CONCAT_WS() function with an empty separator, because that function\nis NULL-safe.\n* Use IFNULL() to turn NULLs into empty strings.\n\nOracle Mode\n-----------\n\nMariaDB starting with 10.3\n--------------------------\nIn Oracle mode from MariaDB 10.3, CONCAT ignores NULL.\n\nExamples\n--------\n\nSELECT CONCAT(\'Ma\', \'ria\', \'DB\');\n+---------------------------+\n| CONCAT(\'Ma\', \'ria\', \'DB\') |\n+---------------------------+\n| MariaDB                   |\n+---------------------------+\n\nSELECT CONCAT(\'Ma\', \'ria\', NULL, \'DB\');\n+---------------------------------+\n| CONCAT(\'Ma\', \'ria\', NULL, \'DB\') |\n+---------------------------------+\n| NULL                            |\n+---------------------------------+\n\nSELECT CONCAT(42.0);\n+--------------+\n| CONCAT(42.0) |\n+--------------+\n| 42.0         |\n+--------------+\n\nUsing IFNULL() to handle NULLs:\n\nSELECT CONCAT(\'The value of @v is: \', IFNULL(@v, \'\'));\n+------------------------------------------------+\n| CONCAT(\'The value of @v is: \', IFNULL(@v, \'\')) |\n+------------------------------------------------+\n| The value of @v is:                            |\n+------------------------------------------------+\n\nIn Oracle mode, from MariaDB 10.3:\n\nSELECT CONCAT(\'Ma\', \'ria\', NULL, \'DB\');\n+---------------------------------+\n| CONCAT(\'Ma\', \'ria\', NULL, \'DB\') |\n+---------------------------------+\n| MariaDB                         |\n+---------------------------------+\n\nURL: https://mariadb.com/kb/en/concat/','','https://mariadb.com/kb/en/concat/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (638,36,'CONCAT_WS','Syntax\n------\n\nCONCAT_WS(separator,str1,str2,...)\n\nDescription\n-----------\n\nCONCAT_WS() stands for Concatenate With Separator and is a special form of\nCONCAT(). The first argument is the separator for the rest of the arguments.\nThe separator is added between the strings to be concatenated. The separator\ncan be a string, as can the rest of the arguments.\n\nIf the separator is NULL, the result is NULL; all other NULL values are\nskipped. This makes CONCAT_WS() suitable when you want to concatenate some\nvalues and avoid losing all information if one of them is NULL.\n\nExamples\n--------\n\nSELECT CONCAT_WS(\',\',\'First name\',\'Second name\',\'Last Name\');\n+-------------------------------------------------------+\n| CONCAT_WS(\',\',\'First name\',\'Second name\',\'Last Name\') |\n+-------------------------------------------------------+\n| First name,Second name,Last Name                      |\n+-------------------------------------------------------+\n\nSELECT CONCAT_WS(\'-\',\'Floor\',NULL,\'Room\');\n+------------------------------------+\n| CONCAT_WS(\'-\',\'Floor\',NULL,\'Room\') |\n+------------------------------------+\n| Floor-Room                         |\n+------------------------------------+\n\nIn some cases, remember to include a space in the separator string:\n\nSET @a = \'gnu\', @b = \'penguin\', @c = \'sea lion\';\nQuery OK, 0 rows affected (0.00 sec)\n\nSELECT CONCAT_WS(\', \', @a, @b, @c);\n+-----------------------------+\n| CONCAT_WS(\', \', @a, @b, @c) |\n+-----------------------------+\n| gnu, penguin, sea lion      |\n+-----------------------------+\n\nUsing CONCAT_WS() to handle NULLs:\n\nSET @a = \'a\', @b = NULL, @c = \'c\';\n\nSELECT CONCAT_WS(\'\', @a, @b, @c);\n+---------------------------+\n| CONCAT_WS(\'\', @a, @b, @c) |\n+---------------------------+\n| ac                        |\n+---------------------------+\n\nURL: https://mariadb.com/kb/en/concat_ws/','','https://mariadb.com/kb/en/concat_ws/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (639,36,'CONVERT','Syntax\n------\n\nCONVERT(expr,type), CONVERT(expr USING transcoding_name)\n\nDescription\n-----------\n\nThe	CONVERT() and CAST() functions take a value of one type and produce a\nvalue of another type.\n\nThe type can be one of the following values:\n\n* BINARY\n* CHAR\n* DATE\n* DATETIME\n* DECIMAL[(M[,D])]\n* DOUBLE\n* FLOAT (from MariaDB 10.4.5)\n* INTEGER\nShort for SIGNED INTEGER\n\n* SIGNED [INTEGER]\n* UNSIGNED [INTEGER]\n* TIME\n* VARCHAR (in Oracle mode, from MariaDB 10.3)\n\nNote that in MariaDB, INT and INTEGER are the same thing.\n\nBINARY produces a string with the BINARY data type. If the optional length is\ngiven, BINARY(N) causes the cast to use no more than N bytes of the argument.\nValues shorter than the given number in bytes are padded with 0x00 bytes to\nmake them equal the length value.\n\nCHAR(N) causes the cast to use no more than the number of characters given in\nthe argument.\n\nThe main difference between the CAST() and CONVERT() is that\nCONVERT(expr,type) is ODBC syntax while CAST(expr as type) and CONVERT(...\nUSING ...) are SQL92 syntax.\n\nCONVERT() with USING is used to convert data between different character sets.\nIn MariaDB, transcoding names are the same as the corresponding character set\nnames. For example, this statement converts the string \'abc\' in the default\ncharacter set to the corresponding string in the utf8 character set:\n\nSELECT CONVERT(\'abc\' USING utf8);\n\nExamples\n--------\n\nSELECT enum_col FROM tbl_name \nORDER BY CAST(enum_col AS CHAR);\n\nConverting a BINARY to string to permit the LOWER function to work:\n\nSET @x = \'AardVark\';\n\nSET @x = BINARY \'AardVark\';\n\nSELECT LOWER(@x), LOWER(CONVERT (@x USING latin1));\n+-----------+----------------------------------+\n| LOWER(@x) | LOWER(CONVERT (@x USING latin1)) |\n+-----------+----------------------------------+\n| AardVark  | aardvark                         |\n+-----------+----------------------------------+\n\nURL: https://mariadb.com/kb/en/convert/','','https://mariadb.com/kb/en/convert/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (640,36,'ELT','Syntax\n------\n\nELT(N, str1[, str2, str3,...])\n\nDescription\n-----------\n\nTakes a numeric argument and a series of string arguments. Returns the string\nthat corresponds to the given numeric position. For instance, it returns str1\nif N is 1, str2 if N is 2, and so on. If the numeric argument is a FLOAT,\nMariaDB rounds it to the nearest INTEGER. If the numeric argument is less than\n1, greater than the total number of arguments, or not a number, ELT() returns\nNULL. It must have at least two arguments.\n\nIt is complementary to the FIELD() function.\n\nExamples\n--------\n\nSELECT ELT(1, \'ej\', \'Heja\', \'hej\', \'foo\');\n+------------------------------------+\n| ELT(1, \'ej\', \'Heja\', \'hej\', \'foo\') |\n+------------------------------------+\n| ej                                 |\n+------------------------------------+\n\nSELECT ELT(4, \'ej\', \'Heja\', \'hej\', \'foo\');\n+------------------------------------+\n| ELT(4, \'ej\', \'Heja\', \'hej\', \'foo\') |\n+------------------------------------+\n| foo                                |\n+------------------------------------+\n\nURL: https://mariadb.com/kb/en/elt/','','https://mariadb.com/kb/en/elt/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (641,36,'EXPORT_SET','Syntax\n------\n\nEXPORT_SET(bits, on, off[, separator[, number_of_bits]])\n\nDescription\n-----------\n\nTakes a minimum of three arguments. Returns a string where each bit in the\ngiven bits argument is returned, with the string values given for on and off.\n\nBits are examined from right to left, (from low-order to high-order bits).\nStrings are added to the result from left to right, separated by a separator\nstring (defaults as \',\'). You can optionally limit the number of bits the\nEXPORT_SET() function examines using the number_of_bits option.\n\nIf any of the arguments are set as NULL, the function returns NULL.\n\nExamples\n--------\n\nSELECT EXPORT_SET(5,\'Y\',\'N\',\',\',4);\n+-----------------------------+\n| EXPORT_SET(5,\'Y\',\'N\',\',\',4) |\n+-----------------------------+\n| Y,N,Y,N                     |\n+-----------------------------+\n\nSELECT EXPORT_SET(6,\'1\',\'0\',\',\',10);\n+------------------------------+\n| EXPORT_SET(6,\'1\',\'0\',\',\',10) |\n+------------------------------+\n| 0,1,1,0,0,0,0,0,0,0          |\n+------------------------------+\n\nURL: https://mariadb.com/kb/en/export_set/','','https://mariadb.com/kb/en/export_set/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (642,36,'EXTRACTVALUE','Syntax\n------\n\nEXTRACTVALUE(xml_frag, xpath_expr)\n\nDescription\n-----------\n\nThe EXTRACTVALUE() function takes two string arguments: a fragment of XML\nmarkup and an XPath expression, (also known as a locator). It returns the text\n(That is, CDDATA), of the first text node which is a child of the element or\nelements matching the XPath expression.\n\nIn cases where a valid XPath expression does not match any text nodes in a\nvalid XML fragment, (including the implicit /text() expression), the\nEXTRACTVALUE() function returns an empty string.\n\nInvalid Arguments\n-----------------\n\nWhen either the XML fragment or the XPath expression is NULL, the\nEXTRACTVALUE() function returns NULL. When the XML fragment is invalid, it\nraises a warning Code 1525:\n\nWarning (Code 1525): Incorrect XML value: \'parse error at line 1 pos 11:\nunexpected END-OF-INPUT\'\n\nWhen the XPath value is invalid, it generates an Error 1105:\n\nERROR 1105 (HY000): XPATH syntax error: \')\'\n\nExplicit text() Expressions\n---------------------------\n\nThis function is the equivalent of performing a match using the XPath\nexpression after appending /text(). In other words:\n\nSELECT\n EXTRACTVALUE(\'<cases><case>example</case></cases>\', \'/cases/case\')\n  AS \'Base Example\',\n EXTRACTVALUE(\'<cases><case>example</case></cases>\', \'/cases/case/text()\')\n  AS \'text() Example\';\n+--------------+----------------+\n| Base Example | text() Example |\n+--------------+----------------+\n| example      | example        |\n+--------------+----------------+\n\nCount Matches\n-------------\n\nWhen EXTRACTVALUE() returns multiple matches, it returns the content of the\nfirst child text node of each matching element, in the matched order, as a\nsingle, space-delimited string.\n\nBy design, the EXTRACTVALUE() function makes no distinction between a match on\nan empty element and no match at all. If you need to determine whether no\nmatching element was found in the XML fragment or if an element was found that\ncontained no child text nodes, use the XPath count() function.\n\nFor instance, when looking for a value that exists, but contains no child text\nnodes, you would get a count of the number of matching instances:\n\nSELECT\n EXTRACTVALUE(\'<cases><case/></cases>\', \'/cases/case\')\n  AS \'Empty Example\',\n EXTRACTVALUE(\'<cases><case/></cases>\', \'count(/cases/case)\')\n  AS \'count() Example\';\n+---------------+-----------------+\n| Empty Example | count() Example |\n+---------------+-----------------+\n|               |               1 |\n+---------------+-----------------+\n\nAlternatively, when looking for a value that doesn\'t exist, count() returns 0.\n\nSELECT\n EXTRACTVALUE(\'<cases><case/></cases>\', \'/cases/person\')\n  AS \'No Match Example\',\n EXTRACTVALUE(\'<cases><case/></cases>\', \'count(/cases/person)\')\n  AS \'count() Example\';\n+------------------+-----------------+\n| No Match Example | count() Example |\n+------------------+-----------------+\n|                  |                0|\n+------------------+-----------------+\n\nMatches\n-------\n\nImportant: The EXTRACTVALUE() function only returns CDDATA. It does not return\ntags that the element might contain or the text that these child elements\ncontain.\n\nSELECT\n\nEXTRACTVALUE(\'<cases><case>Person<email>x@example.com</email></case></cases>\',\n\'/cases\')\n AS Case;\n+--------+\n| Case   |\n+--------+\n| Person |\n+--------+\n\nNote, in the above example, while the XPath expression matches to the parent\n<case> instance, it does not return the contained <email> tag or its content.\n\nExamples\n--------\n\nSELECT\n  ExtractValue(\'<a>ccc<b>ddd</b></a>\', \'/a\')            AS val1,\n  ExtractValue(\'<a>ccc<b>ddd</b></a>\', \'/a/b\')          AS val2,\n  ExtractValue(\'<a>ccc<b>ddd</b></a>\', \'//b\')           AS val3,\n  ExtractValue(\'<a>ccc<b>ddd</b></a>\', \'/b\')            AS val4,\n  ExtractValue(\'<a>ccc<b>ddd</b><b>eee</b></a>\', \'//b\') AS val5;\n+------+------+------+------+---------+\n| val1 | val2 | val3 | val4 | val5    |\n+------+------+------+------+---------+\n| ccc  | ddd  | ddd  |      | ddd eee |\n+------+------+------+------+---------+\n\nURL: https://mariadb.com/kb/en/extractvalue/','','https://mariadb.com/kb/en/extractvalue/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (643,36,'FIELD','Syntax\n------\n\nFIELD(pattern, str1[,str2,...])\n\nDescription\n-----------\n\nReturns the index position of the string or number matching the given pattern.\nReturns 0 in the event that none of the arguments match the pattern. Raises an\nError 1582 if not given at least two arguments.\n\nWhen all arguments given to the FIELD() function are strings, they are treated\nas case-insensitive. When all the arguments are numbers, they are treated as\nnumbers. Otherwise, they are treated as doubles.\n\nIf the given pattern occurs more than once, the	FIELD() function only returns\nthe index of the first instance. If the given pattern is NULL, the function\nreturns 0, as a NULL pattern always fails to match.\n\nThis function is complementary to the ELT() function.\n\nExamples\n--------\n\nSELECT FIELD(\'ej\', \'Hej\', \'ej\', \'Heja\', \'hej\', \'foo\') \n AS \'Field Results\';\n+---------------+\n| Field Results | \n+---------------+\n|             2 |\n+---------------+\n\nSELECT FIELD(\'fo\', \'Hej\', \'ej\', \'Heja\', \'hej\', \'foo\')\n AS \'Field Results\';\n+---------------+\n| Field Results | \n+---------------+\n|             0 |\n+---------------+\n\nSELECT FIELD(1, 2, 3, 4, 5, 1) AS \'Field Results\';\n+---------------+\n| Field Results |\n+---------------+\n|             5 |\n+---------------+\n\nSELECT FIELD(NULL, 2, 3) AS \'Field Results\';\n+---------------+\n| Field Results |\n+---------------+\n|             0 |\n+---------------+\n\nSELECT FIELD(\'fail\') AS \'Field Results\';\nError 1582 (42000): Incorrect parameter count in call\nto native function \'field\'\n\nURL: https://mariadb.com/kb/en/field/','','https://mariadb.com/kb/en/field/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (644,36,'FIND_IN_SET','Syntax\n------\n\nFIND_IN_SET(pattern, strlist)\n\nDescription\n-----------\n\nReturns the index position where the given pattern occurs in a string list.\nThe first argument is the pattern you want to search for. The second argument\nis a string containing comma-separated variables. If the second argument is of\nthe SET data-type, the function is optimized to use bit arithmetic.\n\nIf the pattern does not occur in the string list or if the string list is an\nempty string, the function returns 0. If either argument is NULL, the function\nreturns NULL. The function does not return the correct result if the pattern\ncontains a comma (\",\") character.\n\nExamples\n--------\n\nSELECT FIND_IN_SET(\'b\',\'a,b,c,d\') AS \"Found Results\";\n+---------------+\n| Found Results |\n+---------------+\n|             2 |\n+---------------+\n\nURL: https://mariadb.com/kb/en/find_in_set/','','https://mariadb.com/kb/en/find_in_set/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (645,36,'FORMAT','Syntax\n------\n\nFORMAT(num, decimal_position[, locale])\n\nDescription\n-----------\n\nFormats the given number for display as a string, adding separators to\nappropriate position and rounding the results to the given decimal position.\nFor instance, it would format 15233.345 to 15,233.35.\n\nIf the given decimal position is 0, it rounds to return no decimal point or\nfractional part. You can optionally specify a locale value to format numbers\nto the pattern appropriate for the given region.\n\nExamples\n--------\n\nSELECT FORMAT(1234567890.09876543210, 4) AS \'Format\';\n+--------------------+\n| Format             |\n+--------------------+\n| 1,234,567,890.0988 |\n+--------------------+\n\nSELECT FORMAT(1234567.89, 4) AS \'Format\';\n+----------------+\n| Format         |\n+----------------+\n| 1,234,567.8900 |\n+----------------+\n\nSELECT FORMAT(1234567.89, 0) AS \'Format\';\n+-----------+\n| Format    |\n+-----------+\n| 1,234,568 |\n+-----------+\n\nSELECT FORMAT(123456789,2,\'rm_CH\') AS \'Format\';\n+----------------+\n| Format         |\n+----------------+\n| 123\'456\'789,00 |\n+----------------+\n\nURL: https://mariadb.com/kb/en/format/','','https://mariadb.com/kb/en/format/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (646,36,'FROM_BASE64','Syntax\n------\n\nFROM_BASE64(str)\n\nDescription\n-----------\n\nDecodes the given base-64 encode string, returning the result as a binary\nstring. Returns NULL if the given string is NULL or if it\'s invalid.\n\nIt is the reverse of the TO_BASE64 function.\n\nThere are numerous methods to base-64 encode a string. MariaDB uses the\nfollowing:\n\n* It encodes alphabet value 64 as \'+\'.\n* It encodes alphabet value 63 as \'/\'.\n* It codes output in groups of four printable characters.  Each three byte of\ndata encoded uses four characters.  If the final group is incomplete, it pads\nthe difference with the \'=\' character.\n* It divides long output, adding a new line very 76 characters.\n* In decoding, it recognizes and ignores newlines, carriage returns, tabs and\nspace whitespace characters.\n\nSELECT TO_BASE64(\'Maria\') AS \'Input\';\n+-----------+\n| Input     |\n+-----------+\n| TWFyaWE=  |\n+-----------+\n\nSELECT FROM_BASE64(\'TWFyaWE=\') AS \'Output\';\n+--------+\n| Output |\n+--------+\n| Maria  |\n+--------+\n\nURL: https://mariadb.com/kb/en/from_base64/','','https://mariadb.com/kb/en/from_base64/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (647,36,'HEX','Syntax\n------\n\nHEX(N_or_S)\n\nDescription\n-----------\n\nIf N_or_S is a number, returns a string representation of the hexadecimal\nvalue of N, where N is a longlong (BIGINT) number. This is equivalent to\nCONV(N,10,16).\n\nIf N_or_S is a string, returns a hexadecimal string representation of N_or_S\nwhere each byte of each character in N_or_S is converted to two hexadecimal\ndigits. If N_or_S is NULL, returns NULL. The inverse of this operation is\nperformed by the UNHEX() function.\n\nMariaDB starting with 10.5.0\n----------------------------\nHEX() with an INET6 argument returns a hexadecimal representation of the\nunderlying 16-byte binary string.\n\nExamples\n--------\n\nSELECT HEX(255);\n+----------+\n| HEX(255) |\n+----------+\n| FF       |\n+----------+\n\nSELECT 0x4D617269614442;\n+------------------+\n| 0x4D617269614442 |\n+------------------+\n| MariaDB          |\n+------------------+\n\nSELECT HEX(\'MariaDB\');\n+----------------+\n| HEX(\'MariaDB\') |\n+----------------+\n| 4D617269614442 |\n+----------------+\n\nFrom MariaDB 10.5.0:\n\nSELECT HEX(CAST(\'2001:db8::ff00:42:8329\' AS INET6));\n+----------------------------------------------+\n| HEX(CAST(\'2001:db8::ff00:42:8329\' AS INET6)) |\n+----------------------------------------------+\n| 20010DB8000000000000FF0000428329             |\n+----------------------------------------------+\n\nURL: https://mariadb.com/kb/en/hex/','','https://mariadb.com/kb/en/hex/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (648,36,'INSTR','Syntax\n------\n\nINSTR(str,substr)\n\nDescription\n-----------\n\nReturns the position of the first occurrence of substring substr in string\nstr. This is the same as the two-argument form of LOCATE(), except that the\norder of the arguments is reversed.\n\nINSTR() performs a case-insensitive search.\n\nIf any argument is NULL, returns NULL.\n\nExamples\n--------\n\nSELECT INSTR(\'foobarbar\', \'bar\');\n+---------------------------+\n| INSTR(\'foobarbar\', \'bar\') |\n+---------------------------+\n|                         4 |\n+---------------------------+\n\nSELECT INSTR(\'My\', \'Maria\');\n+----------------------+\n| INSTR(\'My\', \'Maria\') |\n+----------------------+\n|                    0 |\n+----------------------+\n\nURL: https://mariadb.com/kb/en/instr/','','https://mariadb.com/kb/en/instr/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (649,36,'LCASE','Syntax\n------\n\nLCASE(str)\n\nDescription\n-----------\n\nLCASE() is a synonym for LOWER().\n\nURL: https://mariadb.com/kb/en/lcase/','','https://mariadb.com/kb/en/lcase/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (650,36,'LEFT','Syntax\n------\n\nLEFT(str,len)\n\nDescription\n-----------\n\nReturns the leftmost len characters from the string str, or NULL if any\nargument is NULL.\n\nExamples\n--------\n\nSELECT LEFT(\'MariaDB\', 5);\n+--------------------+\n| LEFT(\'MariaDB\', 5) |\n+--------------------+\n| Maria              |\n+--------------------+\n\nURL: https://mariadb.com/kb/en/left/','','https://mariadb.com/kb/en/left/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (651,36,'INSERT Function','Syntax\n------\n\nINSERT(str,pos,len,newstr)\n\nDescription\n-----------\n\nReturns the string str, with the substring beginning at position pos and len\ncharacters long replaced by the string newstr. Returns the original string if\npos is not within the length of the string. Replaces the rest of the string\nfrom position pos if len is not within the length of the rest of the string.\nReturns NULL if any argument is NULL.\n\nExamples\n--------\n\nSELECT INSERT(\'Quadratic\', 3, 4, \'What\');\n+-----------------------------------+\n| INSERT(\'Quadratic\', 3, 4, \'What\') |\n+-----------------------------------+\n| QuWhattic                         |\n+-----------------------------------+\n\nSELECT INSERT(\'Quadratic\', -1, 4, \'What\');\n+------------------------------------+\n| INSERT(\'Quadratic\', -1, 4, \'What\') |\n+------------------------------------+\n| Quadratic                          |\n+------------------------------------+\n\nSELECT INSERT(\'Quadratic\', 3, 100, \'What\');\n+-------------------------------------+\n| INSERT(\'Quadratic\', 3, 100, \'What\') |\n+-------------------------------------+\n| QuWhat                              |\n+-------------------------------------+\n\nURL: https://mariadb.com/kb/en/insert-function/','','https://mariadb.com/kb/en/insert-function/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (652,36,'LENGTH','Syntax\n------\n\nLENGTH(str)\n\nDescription\n-----------\n\nReturns the length of the string str.\n\nIn the default mode, when Oracle mode from MariaDB 10.3 is not set, the length\nis measured in bytes. In this case, a multi-byte character counts as multiple\nbytes. This means that for a string containing five two-byte characters,\nLENGTH() returns 10, whereas CHAR_LENGTH() returns 5.\n\nWhen running Oracle mode from MariaDB 10.3, the length is measured in\ncharacters, and LENGTH is a synonym for CHAR_LENGTH().\n\nIf str is not a string value, it is converted into a string. If str is NULL,\nthe function returns NULL.\n\nExamples\n--------\n\nSELECT LENGTH(\'MariaDB\');\n+-------------------+\n| LENGTH(\'MariaDB\') |\n+-------------------+\n|                 7 |\n+-------------------+\n\nWhen Oracle mode from MariaDB 10.3 is not set:\n\nSELECT CHAR_LENGTH(\'π\'), LENGTH(\'π\'), LENGTHB(\'π\'), OCTET_LENGTH(\'π\');\n+-------------------+--------------+---------------+--------------------+\n| CHAR_LENGTH(\'π\')  | LENGTH(\'π\')  | LENGTHB(\'π\')  | OCTET_LENGTH(\'π\')  |\n+-------------------+--------------+---------------+--------------------+\n|                 1 |            2 |             2 |                  2 |\n+-------------------+--------------+---------------+--------------------+\n\nIn Oracle mode from MariaDB 10.3:\n\nSELECT CHAR_LENGTH(\'π\'), LENGTH(\'π\'), LENGTHB(\'π\'), OCTET_LENGTH(\'π\');\n+-------------------+--------------+---------------+--------------------+\n| CHAR_LENGTH(\'π\')  | LENGTH(\'π\')  | LENGTHB(\'π\')  | OCTET_LENGTH(\'π\')  |\n+-------------------+--------------+---------------+--------------------+\n|                 1 |            1 |             2 |                  2 |\n+-------------------+--------------+---------------+--------------------+\n\nURL: https://mariadb.com/kb/en/length/','','https://mariadb.com/kb/en/length/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (653,36,'LENGTHB','MariaDB starting with 10.3.1\n----------------------------\nIntroduced in MariaDB 10.3.1 as part of the Oracle compatibility enhancements.\n\nSyntax\n------\n\nLENGTHB(str)\n\nDescription\n-----------\n\nLENGTHB() returns the length of the given string, in bytes. When Oracle mode\nis not set, this is a synonym for LENGTH.\n\nA multi-byte character counts as multiple bytes. This means that for a string\ncontaining five two-byte characters, LENGTHB() returns 10, whereas\nCHAR_LENGTH() returns 5.\n\nIf str is not a string value, it is converted into a string. If str is NULL,\nthe function returns NULL.\n\nExamples\n--------\n\nWhen Oracle mode from MariaDB 10.3 is not set:\n\nSELECT CHAR_LENGTH(\'π\'), LENGTH(\'π\'), LENGTHB(\'π\'), OCTET_LENGTH(\'π\');\n+-------------------+--------------+---------------+--------------------+\n| CHAR_LENGTH(\'π\')  | LENGTH(\'π\')  | LENGTHB(\'π\')  | OCTET_LENGTH(\'π\')  |\n+-------------------+--------------+---------------+--------------------+\n|                 1 |            2 |             2 |                  2 |\n+-------------------+--------------+---------------+--------------------+\n\nIn Oracle mode from MariaDB 10.3:\n\nSELECT CHAR_LENGTH(\'π\'), LENGTH(\'π\'), LENGTHB(\'π\'), OCTET_LENGTH(\'π\');\n+-------------------+--------------+---------------+--------------------+\n| CHAR_LENGTH(\'π\')  | LENGTH(\'π\')  | LENGTHB(\'π\')  | OCTET_LENGTH(\'π\')  |\n+-------------------+--------------+---------------+--------------------+\n|                 1 |            1 |             2 |                  2 |\n+-------------------+--------------+---------------+--------------------+\n\nURL: https://mariadb.com/kb/en/lengthb/','','https://mariadb.com/kb/en/lengthb/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (654,36,'LIKE','Syntax\n------\n\nexpr LIKE pat [ESCAPE \'escape_char\']\nexpr NOT LIKE pat [ESCAPE \'escape_char\']\n\nDescription\n-----------\n\nTests whether expr matches the pattern pat. Returns either 1 (TRUE) or 0\n(FALSE). Both expr and pat may be any valid expression and are evaluated to\nstrings. Patterns may use the following wildcard characters:\n\n* % matches any number of characters, including zero.\n* _ matches any single character.\n\nUse NOT LIKE to test if a string does not match a pattern. This is equivalent\nto using the NOT operator on the entire LIKE expression.\n\nIf either the expression or the pattern is NULL, the result is NULL.\n\nLIKE performs case-insensitive substring matches if the collation for the\nexpression and pattern is case-insensitive. For case-sensitive matches,\ndeclare either argument to use a binary collation using COLLATE, or coerce\neither of them to a BINARY string using CAST. Use SHOW COLLATION to get a list\nof available collations. Collations ending in _bin are case-sensitive.\n\nNumeric arguments are coerced to binary strings.\n\nThe _ wildcard matches a single character, not byte. It will only match a\nmulti-byte character if it is valid in the expression\'s character set. For\nexample, _ will match _utf8\"€\", but it will not match _latin1\"€\" because the\nEuro sign is not a valid latin1 character. If necessary, use CONVERT to use\nthe expression in a different character set.\n\nIf you need to match the characters _ or %, you must escape them. By default,\nyou can prefix the wildcard characters the backslash character \\ to escape\nthem. The backslash is used both to encode special characters like newlines\nwhen a string is parsed as well as to escape wildcards in a pattern after\nparsing. Thus, to match an actual backslash, you sometimes need to\ndouble-escape it as \"\\\\\\\\\".\n\nTo avoid difficulties with the backslash character, you can change the\nwildcard escape character using ESCAPE in a LIKE expression. The argument to\nESCAPE must be a single-character string.\n\nExamples\n--------\n\nSelect the days that begin with \"T\":\n\nCREATE TABLE t1 (d VARCHAR(16));\nINSERT INTO t1 VALUES \n (\"Monday\"), (\"Tuesday\"), (\"Wednesday\"),\n (\"Thursday\"), (\"Friday\"), (\"Saturday\"), (\"Sunday\");\nSELECT * FROM t1 WHERE d LIKE \"T%\";\n\nSELECT * FROM t1 WHERE d LIKE \"T%\";\n+----------+\n| d        |\n+----------+\n| Tuesday  |\n| Thursday |\n+----------+\n\nSelect the days that contain the substring \"es\":\n\nSELECT * FROM t1 WHERE d LIKE \"%es%\";\n\nSELECT * FROM t1 WHERE d LIKE \"%es%\";\n+-----------+\n| d         |\n+-----------+\n| Tuesday   |\n| Wednesday |\n+-----------+\n\nSelect the six-character day names:\n\nSELECT * FROM t1 WHERE d like \"___day\";\n\nSELECT * FROM t1 WHERE d like \"___day\";\n+---------+\n| d       |\n+---------+\n| Monday  |\n| Friday  |\n| Sunday  |\n+---------+\n\nWith the default collations, LIKE is case-insensitive:\n\nSELECT * FROM t1 where d like \"t%\";\n\nSELECT * FROM t1 where d like \"t%\";\n+----------+\n| d        |\n+----------+\n| Tuesday  |\n| Thursday |\n+----------+\n\nUse COLLATE to specify a binary collation, forcing case-sensitive matches:\n\nSELECT * FROM t1 WHERE d like \"t%\" COLLATE latin1_bin;\n\nSELECT * FROM t1 WHERE d like \"t%\" COLLATE latin1_bin;\nEmpty set (0.00 sec)\n\nYou can include functions and operators in the expression to match. Select\ndates based on their day name:\n\nCREATE TABLE t2 (d DATETIME);\nINSERT INTO t2 VALUES\n  (\"2007-01-30 21:31:07\"),\n  (\"1983-10-15 06:42:51\"),\n  (\"2011-04-21 12:34:56\"),\n  (\"2011-10-30 06:31:41\"),\n  (\"2011-01-30 14:03:25\"),\n  (\"2004-10-07 11:19:34\");\nSELECT * FROM t2 WHERE DAYNAME(d) LIKE \"T%\";\n\nSELECT * FROM t2 WHERE DAYNAME(d) LIKE \"T%\";\n+------------------+\n| d                |\n+------------------+\n| 2007-01-30 21:31 |\n| 2011-04-21 12:34 |\n| 2004-10-07 11:19 |\n+------------------+\n3 rows in set, 7 warnings (0.00 sec)\n\nOptimizing LIKE\n---------------\n\n* MariaDB can use indexes for LIKE on string columns in the case where the\nLIKE doesn\'t start with % or _.\n* Starting from MariaDB 10.0, one can set  the\noptimizer_use_condition_selectivity variable to 5. If this is done, then the\noptimizer will read optimizer_selectivity_sampling_limit rows to calculate the\nselectivity of the LIKE expression before starting to calculate the query\nplan. This can help speed up some LIKE queries by providing the optimizer with\nmore information about your data.\n\nURL: https://mariadb.com/kb/en/like/','','https://mariadb.com/kb/en/like/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (655,36,'LOCATE','Syntax\n------\n\nLOCATE(substr,str), LOCATE(substr,str,pos)\n\nDescription\n-----------\n\nThe first syntax returns the position of the first occurrence of substring\nsubstr in string str. The second syntax returns the position of the first\noccurrence of substring substr in string str, starting at position pos.\nReturns 0 if substr is not in str.\n\nLOCATE() performs a case-insensitive search.\n\nIf any argument is NULL, returns NULL.\n\nINSTR() is the same as the two-argument form of LOCATE(), except that the\norder of the arguments is reversed.\n\nExamples\n--------\n\nSELECT LOCATE(\'bar\', \'foobarbar\');\n+----------------------------+\n| LOCATE(\'bar\', \'foobarbar\') |\n+----------------------------+\n|                          4 |\n+----------------------------+\n\nSELECT LOCATE(\'My\', \'Maria\');\n+-----------------------+\n| LOCATE(\'My\', \'Maria\') |\n+-----------------------+\n|                     0 |\n+-----------------------+\n\nSELECT LOCATE(\'bar\', \'foobarbar\', 5);\n+-------------------------------+\n| LOCATE(\'bar\', \'foobarbar\', 5) |\n+-------------------------------+\n|                             7 |\n+-------------------------------+\n\nURL: https://mariadb.com/kb/en/locate/','','https://mariadb.com/kb/en/locate/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (656,36,'LOWER','Syntax\n------\n\nLOWER(str)\n\nDescription\n-----------\n\nReturns the string str with all characters changed to lowercase according to\nthe current character set mapping. The default is latin1 (cp1252 West\nEuropean).\n\nExamples\n--------\n\nSELECT LOWER(\'QUADRATICALLY\');\n+------------------------+\n| LOWER(\'QUADRATICALLY\') |\n+------------------------+\n| quadratically          |\n+------------------------+\n\nLOWER() (and UPPER()) are ineffective when applied to binary strings (BINARY,\nVARBINARY, BLOB). To perform lettercase conversion, CONVERT the string to a\nnon-binary string:\n\nSET @str = BINARY \'North Carolina\';\n\nSELECT LOWER(@str), LOWER(CONVERT(@str USING latin1));\n+----------------+-----------------------------------+\n| LOWER(@str)    | LOWER(CONVERT(@str USING latin1)) |\n+----------------+-----------------------------------+\n| North Carolina | north carolina                    |\n+----------------+-----------------------------------+\n\nURL: https://mariadb.com/kb/en/lower/','','https://mariadb.com/kb/en/lower/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (657,36,'LPAD','Syntax\n------\n\nLPAD(str, len [,padstr])\n\nDescription\n-----------\n\nReturns the string str, left-padded with the string padstr to a length of len\ncharacters. If str is longer than len, the return value is shortened to len\ncharacters. If padstr is omitted, the LPAD function pads spaces.\n\nPrior to MariaDB 10.3.1, the padstr parameter was mandatory.\n\nReturns NULL if given a NULL argument. If the result is empty (zero length),\nreturns either an empty string or, from MariaDB 10.3.6 with SQL_MODE=Oracle,\nNULL.\n\nThe Oracle mode version of the function can be accessed outside of Oracle mode\nby using LPAD_ORACLE as the function name.\n\nExamples\n--------\n\nSELECT LPAD(\'hello\',10,\'.\');\n+----------------------+\n| LPAD(\'hello\',10,\'.\') |\n+----------------------+\n| .....hello           |\n+----------------------+\n\nSELECT LPAD(\'hello\',2,\'.\');\n+---------------------+\n| LPAD(\'hello\',2,\'.\') |\n+---------------------+\n| he                  |\n+---------------------+\n\nFrom MariaDB 10.3.1, with the pad string defaulting to space.\n\nSELECT LPAD(\'hello\',10);\n+------------------+\n| LPAD(\'hello\',10) |\n+------------------+\n|      hello       |\n+------------------+\n\nOracle mode version from MariaDB 10.3.6:\n\nSELECT LPAD(\'\',0),LPAD_ORACLE(\'\',0);\n+------------+-------------------+\n| LPAD(\'\',0) | LPAD_ORACLE(\'\',0) |\n+------------+-------------------+\n|            | NULL              |\n+------------+-------------------+\n\nURL: https://mariadb.com/kb/en/lpad/','','https://mariadb.com/kb/en/lpad/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (658,36,'LTRIM','Syntax\n------\n\nLTRIM(str)\n\nDescription\n-----------\n\nReturns the string str with leading space characters removed.\n\nReturns NULL if given a NULL argument. If the result is empty, returns either\nan empty string, or, from MariaDB 10.3.6 with SQL_MODE=Oracle, NULL.\n\nThe Oracle mode version of the function can be accessed outside of Oracle mode\nby using LTRIM_ORACLE as the function name.\n\nExamples\n--------\n\nSELECT QUOTE(LTRIM(\'   MariaDB   \'));\n+-------------------------------+\n| QUOTE(LTRIM(\'   MariaDB   \')) |\n+-------------------------------+\n| \'MariaDB   \'                  |\n+-------------------------------+\n\nOracle mode version from MariaDB 10.3.6:\n\nSELECT LTRIM(\'\'),LTRIM_ORACLE(\'\');\n+-----------+------------------+\n| LTRIM(\'\') | LTRIM_ORACLE(\'\') |\n+-----------+------------------+\n|           | NULL             |\n+-----------+------------------+\n\nURL: https://mariadb.com/kb/en/ltrim/','','https://mariadb.com/kb/en/ltrim/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (659,36,'MAKE_SET','Syntax\n------\n\nMAKE_SET(bits,str1,str2,...)\n\nDescription\n-----------\n\nReturns a set value (a string containing substrings separated by \",\"\ncharacters) consisting of the strings that have the corresponding bit in bits\nset. str1 corresponds to bit 0, str2 to bit 1, and so on. NULL values in str1,\nstr2, ... are not appended to the result.\n\nExamples\n--------\n\nSELECT MAKE_SET(1,\'a\',\'b\',\'c\');\n+-------------------------+\n| MAKE_SET(1,\'a\',\'b\',\'c\') |\n+-------------------------+\n| a                       |\n+-------------------------+\n\nSELECT MAKE_SET(1 | 4,\'hello\',\'nice\',\'world\');\n+----------------------------------------+\n| MAKE_SET(1 | 4,\'hello\',\'nice\',\'world\') |\n+----------------------------------------+\n| hello,world                            |\n+----------------------------------------+\n\nSELECT MAKE_SET(1 | 4,\'hello\',\'nice\',NULL,\'world\');\n+---------------------------------------------+\n| MAKE_SET(1 | 4,\'hello\',\'nice\',NULL,\'world\') |\n+---------------------------------------------+\n| hello                                       |\n+---------------------------------------------+\n\nSELECT QUOTE(MAKE_SET(0,\'a\',\'b\',\'c\'));\n+--------------------------------+\n| QUOTE(MAKE_SET(0,\'a\',\'b\',\'c\')) |\n+--------------------------------+\n| \'\'                             |\n+--------------------------------+\n\nURL: https://mariadb.com/kb/en/make_set/','','https://mariadb.com/kb/en/make_set/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (660,36,'MATCH AGAINST','Syntax\n------\n\nMATCH (col1,col2,...) AGAINST (expr [search_modifier])\n\nDescription\n-----------\n\nA special construct used to perform a fulltext search on a fulltext index.\n\nSee Fulltext Index Overview for a full description, and Full-text Indexes for\nmore articles on the topic.\n\nExamples\n--------\n\nCREATE TABLE ft_myisam(copy TEXT,FULLTEXT(copy)) ENGINE=MyISAM;\n\nINSERT INTO ft_myisam(copy) VALUES (\'Once upon a time\'), (\'There was a wicked\nwitch\'), \n (\'Who ate everybody up\');\n\nSELECT * FROM ft_myisam WHERE MATCH(copy) AGAINST(\'wicked\');\n+--------------------------+\n| copy                     |\n+--------------------------+\n| There was a wicked witch |\n+--------------------------+\n\nSELECT id, body, MATCH (title,body) AGAINST\n  (\'Security implications of running MySQL as root\'\n  IN NATURAL LANGUAGE MODE) AS score\n  FROM articles WHERE MATCH (title,body) AGAINST\n  (\'Security implications of running MySQL as root\'\n  IN NATURAL LANGUAGE MODE);\n+----+-------------------------------------+-----------------+\n| id | body                                | score           |\n+----+-------------------------------------+-----------------+\n|  4 | 1. Never run mysqld as root. 2. ... | 1.5219271183014 |\n|  6 | When configured properly, MySQL ... | 1.3114095926285 |\n+----+-------------------------------------+-----------------+\n\nURL: https://mariadb.com/kb/en/match-against/','','https://mariadb.com/kb/en/match-against/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (661,36,'MID','Syntax\n------\n\nMID(str,pos,len)\n\nDescription\n-----------\n\nMID(str,pos,len) is a synonym for SUBSTRING(str,pos,len).\n\nExamples\n--------\n\nSELECT MID(\'abcd\',4,1);\n+-----------------+\n| MID(\'abcd\',4,1) |\n+-----------------+\n| d               |\n+-----------------+\n\nSELECT MID(\'abcd\',2,2);\n+-----------------+\n| MID(\'abcd\',2,2) |\n+-----------------+\n| bc              |\n+-----------------+\n\nA negative starting position:\n\nSELECT MID(\'abcd\',-2,4);\n+------------------+\n| MID(\'abcd\',-2,4) |\n+------------------+\n| cd               |\n+------------------+\n\nURL: https://mariadb.com/kb/en/mid/','','https://mariadb.com/kb/en/mid/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (662,36,'NOT LIKE','Syntax\n------\n\nexpr NOT LIKE pat [ESCAPE \'escape_char\']\n\nDescription\n-----------\n\nThis is the same as NOT (expr LIKE pat [ESCAPE \'escape_char\']).\n\nURL: https://mariadb.com/kb/en/not-like/','','https://mariadb.com/kb/en/not-like/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (663,36,'OCTET_LENGTH','Syntax\n------\n\nOCTET_LENGTH(str)\n\nDescription\n-----------\n\nOCTET_LENGTH() returns the length of the given string, in octets (bytes). This\nis a synonym for LENGTHB(), and, when Oracle mode from MariaDB 10.3 is not\nset, a synonym for LENGTH().\n\nA multi-byte character counts as multiple bytes. This means that for a string\ncontaining five two-byte characters, OCTET_LENGTH() returns 10, whereas\nCHAR_LENGTH() returns 5.\n\nIf str is not a string value, it is converted into a string. If str is NULL,\nthe function returns NULL.\n\nExamples\n--------\n\nWhen Oracle mode from MariaDB 10.3 is not set:\n\nSELECT CHAR_LENGTH(\'π\'), LENGTH(\'π\'), LENGTHB(\'π\'), OCTET_LENGTH(\'π\');\n+-------------------+--------------+---------------+--------------------+\n| CHAR_LENGTH(\'π\')  | LENGTH(\'π\')  | LENGTHB(\'π\')  | OCTET_LENGTH(\'π\')  |\n+-------------------+--------------+---------------+--------------------+\n|                 1 |            2 |             2 |                  2 |\n+-------------------+--------------+---------------+--------------------+\n\nIn Oracle mode from MariaDB 10.3:\n\nSELECT CHAR_LENGTH(\'π\'), LENGTH(\'π\'), LENGTHB(\'π\'), OCTET_LENGTH(\'π\');\n+-------------------+--------------+---------------+--------------------+\n| CHAR_LENGTH(\'π\')  | LENGTH(\'π\')  | LENGTHB(\'π\')  | OCTET_LENGTH(\'π\')  |\n+-------------------+--------------+---------------+--------------------+\n|                 1 |            1 |             2 |                  2 |\n+-------------------+--------------+---------------+--------------------+\n\nURL: https://mariadb.com/kb/en/octet_length/','','https://mariadb.com/kb/en/octet_length/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (664,36,'ORD','Syntax\n------\n\nORD(str)\n\nDescription\n-----------\n\nIf the leftmost character of the string str is a multi-byte character, returns\nthe code for that character, calculated from the numeric values of its\nconstituent bytes using this formula:\n\n(1st byte code)\n+ (2nd byte code x 256)\n+ (3rd byte code x 256 x 256) ...\n\nIf the leftmost character is not a multi-byte character, ORD() returns the\nsame value as the ASCII() function.\n\nExamples\n--------\n\nSELECT ORD(\'2\');\n+----------+\n| ORD(\'2\') |\n+----------+\n|       50 |\n+----------+\n\nURL: https://mariadb.com/kb/en/ord/','','https://mariadb.com/kb/en/ord/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (665,36,'POSITION','Syntax\n------\n\nPOSITION(substr IN str)\n\nDescription\n-----------\n\nPOSITION(substr IN str) is a synonym for LOCATE(substr,str).\n\nIt\'s part of ODBC 3.0.\n\nURL: https://mariadb.com/kb/en/position/','','https://mariadb.com/kb/en/position/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (666,36,'QUOTE','Syntax\n------\n\nQUOTE(str)\n\nDescription\n-----------\n\nQuotes a string to produce a result that can be used as a properly escaped\ndata value in an SQL statement. The string is returned enclosed by single\nquotes and with each instance of single quote (\"\'\"), backslash (\"\\\"), ASCII\nNUL, and Control-Z preceded by a backslash. If the argument is NULL, the\nreturn value is the word \"NULL\" without enclosing single quotes.\n\nExamples\n--------\n\nSELECT QUOTE(\"Don\'t!\");\n+-----------------+\n| QUOTE(\"Don\'t!\") |\n+-----------------+\n| \'Don\\\'t!\'       |\n+-----------------+\n\nSELECT QUOTE(NULL); \n+-------------+\n| QUOTE(NULL) |\n+-------------+\n| NULL        |\n+-------------+\n\nURL: https://mariadb.com/kb/en/quote/','','https://mariadb.com/kb/en/quote/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (667,36,'REPEAT Function','Syntax\n------\n\nREPEAT(str,count)\n\nDescription\n-----------\n\nReturns a string consisting of the string str repeated count times. If count\nis less than 1, returns an empty string. Returns NULL if str or count are NULL.\n\nExamples\n--------\n\nSELECT QUOTE(REPEAT(\'MariaDB \',4));\n+------------------------------------+\n| QUOTE(REPEAT(\'MariaDB \',4))        |\n+------------------------------------+\n| \'MariaDB MariaDB MariaDB MariaDB \' |\n+------------------------------------+\n\nURL: https://mariadb.com/kb/en/repeat-function/','','https://mariadb.com/kb/en/repeat-function/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (668,36,'REPLACE Function','Syntax\n------\n\nREPLACE(str,from_str,to_str)\n\nDescription\n-----------\n\nReturns the string str with all occurrences of the string from_str replaced by\nthe string to_str. REPLACE() performs a case-sensitive match when searching\nfor from_str.\n\nExamples\n--------\n\nSELECT REPLACE(\'www.mariadb.org\', \'w\', \'Ww\');\n+---------------------------------------+\n| REPLACE(\'www.mariadb.org\', \'w\', \'Ww\') |\n+---------------------------------------+\n| WwWwWw.mariadb.org                    |\n+---------------------------------------+\n\nURL: https://mariadb.com/kb/en/replace-function/','','https://mariadb.com/kb/en/replace-function/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (669,36,'REVERSE','Syntax\n------\n\nREVERSE(str)\n\nDescription\n-----------\n\nReturns the string str with the order of the characters reversed.\n\nExamples\n--------\n\nSELECT REVERSE(\'desserts\');\n+---------------------+\n| REVERSE(\'desserts\') |\n+---------------------+\n| stressed            |\n+---------------------+\n\nURL: https://mariadb.com/kb/en/reverse/','','https://mariadb.com/kb/en/reverse/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (670,36,'RIGHT','Syntax\n------\n\nRIGHT(str,len)\n\nDescription\n-----------\n\nReturns the rightmost len characters from the string str, or NULL if any\nargument is NULL.\n\nExamples\n--------\n\nSELECT RIGHT(\'MariaDB\', 2);\n+---------------------+\n| RIGHT(\'MariaDB\', 2) |\n+---------------------+\n| DB                  |\n+---------------------+\n\nURL: https://mariadb.com/kb/en/right/','','https://mariadb.com/kb/en/right/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (671,36,'RPAD','Syntax\n------\n\nRPAD(str, len [, padstr])\n\nDescription\n-----------\n\nReturns the string str, right-padded with the string padstr to a length of len\ncharacters. If str is longer than len, the return value is shortened to len\ncharacters. If padstr is omitted, the RPAD function pads spaces.\n\nPrior to MariaDB 10.3.1, the padstr parameter was mandatory.\n\nReturns NULL if given a NULL argument. If the result is empty (a length of\nzero), returns either an empty string, or, from MariaDB 10.3.6 with\nSQL_MODE=Oracle, NULL.\n\nThe Oracle mode version of the function can be accessed outside of Oracle mode\nby using RPAD_ORACLE as the function name.\n\nExamples\n--------\n\nSELECT RPAD(\'hello\',10,\'.\');\n+----------------------+\n| RPAD(\'hello\',10,\'.\') |\n+----------------------+\n| hello.....           |\n+----------------------+\n\nSELECT RPAD(\'hello\',2,\'.\');\n+---------------------+\n| RPAD(\'hello\',2,\'.\') |\n+---------------------+\n| he                  |\n+---------------------+\n\nFrom MariaDB 10.3.1, with the pad string defaulting to space.\n\nSELECT RPAD(\'hello\',30);\n+--------------------------------+\n| RPAD(\'hello\',30)               |\n+--------------------------------+\n| hello                          |\n+--------------------------------+\n\nOracle mode version from MariaDB 10.3.6:\n\nSELECT RPAD(\'\',0),RPAD_ORACLE(\'\',0);\n+------------+-------------------+\n| RPAD(\'\',0) | RPAD_ORACLE(\'\',0) |\n+------------+-------------------+\n|            | NULL              |\n+------------+-------------------+\n\nURL: https://mariadb.com/kb/en/rpad/','','https://mariadb.com/kb/en/rpad/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (672,36,'RTRIM','Syntax\n------\n\nRTRIM(str)\n\nDescription\n-----------\n\nReturns the string str with trailing space characters removed.\n\nReturns NULL if given a NULL argument. If the result is empty, returns either\nan empty string, or, from MariaDB 10.3.6 with SQL_MODE=Oracle, NULL.\n\nThe Oracle mode version of the function can be accessed outside of Oracle mode\nby using RTRIM_ORACLE as the function name.\n\nExamples\n--------\n\nSELECT QUOTE(RTRIM(\'MariaDB    \'));\n+-----------------------------+\n| QUOTE(RTRIM(\'MariaDB    \')) |\n+-----------------------------+\n| \'MariaDB\'                   |\n+-----------------------------+\n\nOracle mode version from MariaDB 10.3.6:\n\nSELECT RTRIM(\'\'),RTRIM_ORACLE(\'\');\n+-----------+------------------+\n| RTRIM(\'\') | RTRIM_ORACLE(\'\') |\n+-----------+------------------+\n|           | NULL             |\n+-----------+------------------+\n\nURL: https://mariadb.com/kb/en/rtrim/','','https://mariadb.com/kb/en/rtrim/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (673,36,'SOUNDEX','Syntax\n------\n\nSOUNDEX(str)\n\nDescription\n-----------\n\nReturns a soundex string from str. Two strings that sound almost the same\nshould have identical soundex strings. A standard soundex string is four\ncharacters long, but the SOUNDEX() function returns an arbitrarily long\nstring. You can use SUBSTRING() on the result to get a standard soundex\nstring. All non-alphabetic characters in str are ignored. All international\nalphabetic characters outside the A-Z range are treated as vowels.\n\nImportant: When using SOUNDEX(), you should be aware of the following details:\n\n* This function, as currently implemented, is intended to work well with\n strings that are in the English language only. Strings in other languages may\n not produce reasonable results.\n\n* This function implements the original Soundex algorithm, not the more\npopular enhanced version (also described by D. Knuth). The difference is that\noriginal version discards vowels first and duplicates second, whereas the\nenhanced version discards duplicates first and vowels second.\n\nExamples\n--------\n\nSOUNDEX(\'Hello\');\n+------------------+\n| SOUNDEX(\'Hello\') |\n+------------------+\n| H400             |\n+------------------+\n\nSELECT SOUNDEX(\'MariaDB\');\n+--------------------+\n| SOUNDEX(\'MariaDB\') |\n+--------------------+\n| M631               |\n+--------------------+\n\nSELECT SOUNDEX(\'Knowledgebase\');\n+--------------------------+\n| SOUNDEX(\'Knowledgebase\') |\n+--------------------------+\n| K543212                  |\n+--------------------------+\n\nSELECT givenname, surname FROM users WHERE SOUNDEX(givenname) =\nSOUNDEX(\"robert\");\n+-----------+---------+\n| givenname | surname |\n+-----------+---------+\n| Roberto   | Castro  |\n+-----------+---------+\n\nURL: https://mariadb.com/kb/en/soundex/','','https://mariadb.com/kb/en/soundex/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (674,36,'SOUNDS LIKE','Syntax\n------\n\nexpr1 SOUNDS LIKE expr2\n\nDescription\n-----------\n\nThis is the same as SOUNDEX(expr1) = SOUNDEX(expr2).\n\nExample\n-------\n\nSELECT givenname, surname FROM users WHERE givenname SOUNDS LIKE \"robert\";\n+-----------+---------+\n| givenname | surname |\n+-----------+---------+\n| Roberto   | Castro  |\n+-----------+---------+\n\nURL: https://mariadb.com/kb/en/sounds-like/','','https://mariadb.com/kb/en/sounds-like/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (675,36,'SPACE','Syntax\n------\n\nSPACE(N)\n\nDescription\n-----------\n\nReturns a string consisting of N space characters. If N is NULL, returns NULL.\n\nExamples\n--------\n\nSELECT QUOTE(SPACE(6));\n+-----------------+\n| QUOTE(SPACE(6)) |\n+-----------------+\n| \'      \'        |\n+-----------------+\n\nURL: https://mariadb.com/kb/en/space/','','https://mariadb.com/kb/en/space/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (676,36,'STRCMP','Syntax\n------\n\nSTRCMP(expr1,expr2)\n\nDescription\n-----------\n\nSTRCMP() returns 0 if the strings are the same, -1 if the first argument is\nsmaller than the second according to the current sort order, and 1 if the\nstrings are otherwise not the same. Returns NULL is either argument is NULL.\n\nExamples\n--------\n\nSELECT STRCMP(\'text\', \'text2\');\n+-------------------------+\n| STRCMP(\'text\', \'text2\') |\n+-------------------------+\n|                      -1 |\n+-------------------------+\n\nSELECT STRCMP(\'text2\', \'text\');\n+-------------------------+\n| STRCMP(\'text2\', \'text\') |\n+-------------------------+\n|                       1 |\n+-------------------------+\n\nSELECT STRCMP(\'text\', \'text\');\n+------------------------+\n| STRCMP(\'text\', \'text\') |\n+------------------------+\n|                      0 |\n+------------------------+\n\nURL: https://mariadb.com/kb/en/strcmp/','','https://mariadb.com/kb/en/strcmp/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (677,36,'SUBSTR','Description\n-----------\n\nSUBSTR() is a synonym for SUBSTRING().\n\nURL: https://mariadb.com/kb/en/substr/','','https://mariadb.com/kb/en/substr/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (678,36,'SUBSTRING','Syntax\n------\n\nSUBSTRING(str,pos), \nSUBSTRING(str FROM pos), \nSUBSTRING(str,pos,len),\nSUBSTRING(str FROM pos FOR len)\n\nSUBSTR(str,pos), \nSUBSTR(str FROM pos), \nSUBSTR(str,pos,len),\nSUBSTR(str FROM pos FOR len)\n\nDescription\n-----------\n\nThe forms without a len argument return a substring from string str starting\nat position pos.\n\nThe forms with a len argument return a substring len characters long from\nstring str, starting at position pos.\n\nThe forms that use FROM are standard SQL syntax.\n\nIt is also possible to use a negative value for pos. In this case, the\nbeginning of the substring is pos characters from the end of the string,\nrather than the beginning. A negative value may be used for pos in any of the\nforms of this function.\n\nBy default, the position of the first character in the string from which the\nsubstring is to be extracted is reckoned as 1. For Oracle-compatibility, from\nMariaDB 10.3.3, when sql_mode is set to \'oracle\', position zero is treated as\nposition 1 (although the first character is still reckoned as 1).\n\nIf any argument is NULL, returns NULL.\n\nExamples\n--------\n\nSELECT SUBSTRING(\'Knowledgebase\',5);\n+------------------------------+\n| SUBSTRING(\'Knowledgebase\',5) |\n+------------------------------+\n| ledgebase                    |\n+------------------------------+\n\nSELECT SUBSTRING(\'MariaDB\' FROM 6);\n+-----------------------------+\n| SUBSTRING(\'MariaDB\' FROM 6) |\n+-----------------------------+\n| DB                          |\n+-----------------------------+\n\nSELECT SUBSTRING(\'Knowledgebase\',3,7);\n+--------------------------------+\n| SUBSTRING(\'Knowledgebase\',3,7) |\n+--------------------------------+\n| owledge                        |\n+--------------------------------+\n\nSELECT SUBSTRING(\'Knowledgebase\', -4);\n+--------------------------------+\n| SUBSTRING(\'Knowledgebase\', -4) |\n+--------------------------------+\n| base                           |\n+--------------------------------+\n\nSELECT SUBSTRING(\'Knowledgebase\', -8, 4);\n+-----------------------------------+\n| SUBSTRING(\'Knowledgebase\', -8, 4) |\n+-----------------------------------+\n| edge                              |\n+-----------------------------------+\n\nSELECT SUBSTRING(\'Knowledgebase\' FROM -8 FOR 4);\n+------------------------------------------+\n| SUBSTRING(\'Knowledgebase\' FROM -8 FOR 4) |\n+------------------------------------------+\n| edge                                     |\n+------------------------------------------+\n\nOracle mode from MariaDB 10.3.3:\n\nSELECT SUBSTR(\'abc\',0,3);\n+-------------------+\n| SUBSTR(\'abc\',0,3) |\n+-------------------+\n|                   |\n+-------------------+\n\nSELECT SUBSTR(\'abc\',1,2);\n+-------------------+\n| SUBSTR(\'abc\',1,2) |\n+-------------------+\n| ab                |\n+-------------------+\n\nSET sql_mode=\'oracle\';\n\nSELECT SUBSTR(\'abc\',0,3);\n+-------------------+\n| SUBSTR(\'abc\',0,3) |\n+-------------------+\n| abc               |\n+-------------------+\n\nSELECT SUBSTR(\'abc\',1,2);\n+-------------------+\n| SUBSTR(\'abc\',1,2) |\n+-------------------+\n| ab                |\n+-------------------+\n\nURL: https://mariadb.com/kb/en/substring/','','https://mariadb.com/kb/en/substring/');
insert into help_topic (help_topic_id,help_category_id,name,description,example,url) values (679,36,'SUBSTRING_INDEX','Syntax\n------\n\nSUBSTRING_INDEX(str,delim,count)\n\nDescription\n-----------\n\nReturns the substring from string str before count occurrences of the\ndelimiter delim. If count is positive, everything to the left of the final\ndelimiter (counting from the left) is returned. If count is negative,\neverything to the right of the final delimiter (counting from the right) is\nreturned. SUBSTRING_INDEX() performs a case-sensitive match when searching for\ndelim.\n\nIf any argument is NULL, returns NULL.\n\nFor example\n\nSUBSTRING_INDEX(\'www.mariadb.org\', \'.\', 2)\n\nmeans \"Return all of the characters up to the 2nd occurrence of .\"\n\nExamples\n--------\n\nSELECT SUBSTRING_INDEX(\'www.mariadb.org\', \'.\', 2);\n+--------------------------------------------+\n| SUBSTRING_INDEX(\'www.mariadb.org\', \'.\', 2) |\n+--------------------------------------------+\n| www.mariadb                                |\n+--------------------------------------------+\n\nSELECT SUBSTRING_INDEX(\'www.mariadb.org\', \'.\', -2);\n+---------------------------------------------+\n| SUBSTRING_INDEX(\'www.mariadb.org\', \'.\', -2) |\n+---------------------------------------------+\n| mariadb.org                                 |\n+---------------------------------------------+\n\nURL: https://mariadb.com/kb/en/substring_index/','','https://mariadb.com/kb/en/substring_index/');
